Difference between revisions of "Features/WPA-WPA2-Enterprise-Network-Connections/Testing"

From Sugar Labs
Jump to: navigation, search
Line 22: Line 22:
 
* Navigate to the "Neighbourhood view" on the XO.
 
* Navigate to the "Neighbourhood view" on the XO.
 
* Click on the network-icon, and enter the parameters, as seen in the following screenshot
 
* Click on the network-icon, and enter the parameters, as seen in the following screenshot
** [[File:ttls_authentication.png]]
+
** [[File:TTLS_authentication.png]]

Revision as of 10:10, 14 December 2011

Setting up a RADIUS server (on a dedicated machine)

Setting up the access-point / router

  • Connect the access-point/router, with the RADIUS server machine, through a ethernet cable.
  • Through the RADIUS server machine, open the browser, type in the access-point/router IP address, and configure it for WPA/WPA2-Enterprise authentication. A sample screenshot is presented below
    • Router configuration.png
  • Note that, you may only need to enter the "Radius Server IP Address" ("192.168.1.3" in the screenshot). The "Radius Server Port", and "Share Secret" are the default ones (at least for a default setup of freeradius).

TESTING - TTLS-based authentication

  • Navigate to the "Neighbourhood view" on the XO.
  • Click on the network-icon, and enter the parameters, as seen in the following screenshot
    • TTLS authentication.png