Jump to: navigation, search


4,274 bytes removed, 02:34, 14 July 2018
Migrate to GitHub
[[Image:== Measure-icon.svg]]==
==About==This Activity draws a picture of the sound heard by the internal microphone or of the signal present on the microphone socketRead at https://help. More specifically it draws a graph of this input versus time, the input is on the vertical axis and time is on the horizontal axissugarlabs. That is, the laptop functions like a machine called an oscilloscopeorg/measure. html
As well as graphing signal as a function of time, Measure can also graph as a function of frequency. The XO-1 laptop is only capable of mono input, the XO-1.5 and XO-1.75 are capable of stereo input on their microphone socket and can graph two signals at once. '''Note:''' As of Measure Version 37, older versions of Sugar, e.g. 0.84, are no longer supported. [[File:Measure tut 1 24.jpg|center|300px]] ==Using==[[image:Measure-screen.JPG|600px|center]] 1. Select secondary toolbar - allows the Activity's Journal entry to be renamed 2. Select secondary toolbar - measurement settings 3. Select secondary toolbar - tuning settings 4. The selected input type - Sound (AC voltage), resistance or DC voltage 5. The time scale 6. Freeze the display 7. Capture sample now - saves an image of the wave in the Journal 8. Stop - exits the Activity 9. Mute - mute/unmute channel 10. Invert - invert the display 11. Use these sliders source file has been moved to control the sensitivity 12. The settings that are selected  [[Filehttps:Measure2ndtoolbar.JPG|600px|center]] The sensor toolbar - measurement settings 13. Sound - use this setting with the internal microphone, external microphone and external AC signals 14. Resistance sensor - use with external resistive type transducers 15. Voltage sensor - use with external sensors which generate a voltage 16. Time base/frequency - graphs the signal vs. time or graphs amplitude vs. frequency 17. Sample interval - a text file 'Measure Log' is saved to the journal, it contains one sample per interval 18. Starts/stops saving a text file 'Measure Log' with measured values as readable text 19. Trigger - synchronise the sample period to the waveform so that the sample will start on a rising edge or falling edge  [[File:Measure3rdtoolbar.JPG|600px|center]] The tuning toolbar - frequency settings '''Hint:''' Adjust the time scale (#5) to increase the spacing between the tuning lines. 20. Instrument - select instrument to tune 21. Note entry - select a note for tuning 22. Frequency entry - enter a frequency to mark 23github. Showcom/hide tuning mark 24. Showgodiard/hide harmonics 25. Play a note 26. Measured note [[image:Measurehelp-tuning.JPG|600px|center]] ==Applying==Let the children experiment with the internal microphone, try singing, whistling, musical instruments, the Tam Tam musical Activity. The Turtle Blocks Activity can generate an audio tone. The children should learn through guided discovery that:* sound is a pressure wave* the pitch of the sound is determined by the frequency or cycles per second (Hz)* the loudness of a sound is determined by the amplitude* sounds contain multiple frequency components or harmonics* the more pure sounds have less harmonics ==Sharing==This Activity does not currently support sharing. ==Extending==Measure is able to take input from a wide range of external sensors including switches, photocells, temperature sensors, inductive loops, hall effect sensors, soil probes and many more. Care should be taken not to exceed the allowable input voltage:* XO-1 -0.5V to 5V* XO-1.5 -6V to +9V* XO-1.75 -6V to +9V It is a good idea, particularly on the XO-1, to put a resistor of 680 ohms in the phono plug, this increases the allowable input voltage range. [[image:Audio 680 ohm.jpg|center|300px]] ===Plotting===You can use save data from measure to the Sugar Journal using the Capture feature described above ([[Activitiesactivity/Measure#Using|16]]). These data can then be imported into [[Activitiesblob/SimpleGraph#Graphing_Measure_data|SimpleGraph]], where they are displayed. [[File:SimpleGraph8.png|center|300px]] ===More ideas===You can find ideas for fun science experiments at http:master/source/ and ===Building sensors===There are detailed instructions for building sensors at []. ===Adding instruments===You can add new instruments to tune by modifying the instrument dictionary in [[Category: Activity]rst GitHub]

Navigation menu