8,288
edits
Changes
Sugar on a Stick/Windows (view source)
Revision as of 12:03, 2 December 2016
, 12:03, 2 December 2016starting with Fedora 24...
*# Insert a USB flash drive (or SD Card<sup> [[#Notes|Notes]]</sup>) with 2 GB or more of free space into your computer.
*# Insert a USB flash drive (or SD Card<sup> [[#Notes|Notes]]</sup>) with 2 GB or more of free space into your computer.
*# [[Sugar on a Stick/Boot|Boot your computer]] with the CD-ROM disc. You probably need to press F1, F10, F12, Esc, or a similar key as the computer starts up in order to set the boot source for your computer to the CD-ROM device.
*# [[Sugar on a Stick/Boot|Boot your computer]] with the CD-ROM disc. You probably need to press F1, F10, F12, Esc, or a similar key as the computer starts up in order to set the boot source for your computer to the CD-ROM device.
*# A successful boot will take you into ''Sugar on a Stick''. You can From there, open the Terminal Activity, [[File:Activity-terminal.png|bottom|link=http://en.flossmanuals.net/terminal]], from the Home List View.
*# A successful boot will take you into ''Sugar on a Stick''. You can From there, open the Terminal Activity, [[File:Activity-terminal.png|bottom|link=http://en.flossmanuals.net/terminal]], from the <span class=plainlinks>[http://wiki.sugarlabs.org/images/9/9b/Home_ListView_button.png Home list View]</span>.
*# Switch to run commands with 'root' user permissions by entering {{Code|su -}} on the command line.
*# Switch to run commands with 'root' user permissions by entering {{Code|su -}} on the command line.
{{Note/important|Important change since Fedora 24 SoaS|The ''livecd-iso-to-disk'' installation script is no longer packaged in the SoaS .iso file. Starting with Fedora 24, if you want a Live USB with persistent storage, you must install the ''livecd-tools'' package to obtain the installation script and the SYSLINUX boot loader. Use this command to obtain the installer:{{Code|sudo dnf install livecd-tools}}}}<ul>
<ol start="6">
<li>''Verify the USB/SD '''s'''csi '''d'''rive node name (such as sda, sdb, etc.) and partition (such as 1, 2, etc.) for your USB/SD device.'' It would look like, for example, {{Code|/dev/sd'''b'''1}}.</li>
<ul><ul><ul><ul>
<li> The {{Code|df -Th}} command shows your device filesystem on a device node, for example, /dev/sdb1, mounted on a directory [[wikipedia:Mount (computing)|mount point]], such as /run/media/liveuser/<USBdeviceManufacturer></li>
{{Show|You should see something like the following:
{{Show|You should see something like the following:
|<pre>
|<pre>
[root@localhost ~]# df -Th
[root@localhost ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/live-rw ext4 2.9G 2.1G 774M 74% /
/dev/mapper/live-rw ext4 2.9G 2.1G 773M 74% /
devtmpfs devtmpfs 2.0G 0 2.0G 0% /dev
devtmpfs devtmpfs 2.0G 0 2.0G 0% /dev
tmpfs tmpfs 2.0G 68K 2.0G 1% /dev/shm
tmpfs tmpfs 2.0G 72K 2.0G 1% /dev/shm
tmpfs tmpfs 2.0G 632K 2.0G 1% /run
tmpfs tmpfs 2.0G 632K 2.0G 1% /run
tmpfs tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
tmpfs tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
/dev/sr0 iso9660 670M 670M 0 100% /run/initramfs/live
/dev/sr0 iso9660 670M 670M 0 100% /run/initramfs/live
tmpfs tmpfs 2.0G 24K 2.0G 1% /tmp
tmpfs tmpfs 2.0G 32K 2.0G 1% /tmp
varcacheyum tmpfs 2.0G 0 2.0G 0% /var/cache/yum
varcacheyum tmpfs 2.0G 0 2.0G 0% /var/cache/yum
vartmp tmpfs 2.0G 0 2.0G 0% /var/tmp
vartmp tmpfs 2.0G 0 2.0G 0% /var/tmp
/dev/sdb1 vfat 15G 2.4G 13G 16% /run/media/liveuser/TOS
/dev/sdb1 vfat 3.8G 4.0K 3.8G 1% /run/media/liveuser/SanDisk
</pre>}}</ul></ul></ul>
</pre>}}
<ol start="8">
<ol start="8">
<li> Unmount the USB device filesystem with this command: {{Code|umount /run/media/liveuser/'''MyUSBdiscMountPoint'''}}, where {{Code|'''MyUSBdiscMountPoint'''}} is {{Code|TOS}} in the dropdown example, above.</li>
<li> Unmount the USB device filesystem with this command: {{Code|umount /run/media/liveuser/'''MyUSBdiscMountPoint'''}}, where {{Code|'''MyUSBdiscMountPoint'''}} is {{Code|SanDisk}} in the dropdown example, above.</li>
<li> Execute this command line: (Substitute the {{Code|/dev/sd'''?'''1}}, below, with the node name you determined in step 7, above.)<br><div style="padding: 1em; border: 1px dashed #2F6FAB; background-color: #FBFBFB; margin: 1em 0px 1em 0em; font-family: Courier;">./livecd-iso-to-disk --reset-mbr --overlay-size-mb '''500''' --home-size-mb '''900''' --delete-home --unencrypted-home /run/initramfs/livedev /dev/sd'''?'''1</div>
<li> Execute this command line: (Substitute the {{Code|/dev/sd'''?'''1}}, below, with the node name you determined in step 7, above.)<br><div style="padding: 1em; border: 1px dashed #2F6FAB; background-color: #FBFBFB; margin: 1em 0px 1em 0em; font-family: monospace,Consolas; overflow: auto;">livecd-iso-to-disk --reset-mbr --overlay-size-mb '''500''' --home-size-mb '''800''' --delete-home --unencrypted-home /run/initramfs/livedev /dev/sd'''?'''1</div>
</li>
</li>
(The '''500''' and '''800''' size values, above, are suitable for a 2 GB USB device. For a 4 GB device, one might use '''1000''' and '''1600''' megabytes instead.)
{{Show|The installation transcript should look like the following:
|<pre>
[root@localhost LiveOS]# livecd-iso-to-disk --overlay-size-mb 500 --home-size-mb 800 --unencrypted-home /run/initramfs/livedev /dev/sdb1
Verifying image...
/dev/sr0: b0a9414ff7eb79b680d5c86440e19587
Fragment sums: 9bfe23577651c88dcfb78c76ac3a28a5c53eead4561e3bdc5921b8b2e748
Fragment count: 20
Press [Esc] to abort check.
Checking: 100.0%
The media check is complete, the result is: PASS.
It is OK to use this media.
Copying live image to target device.
squashfs.img
630,784,000 100% 1.96MB/s 0:05:06 (xfr#1, to-chk=0/1)
osmin.img
8,192 100% 0.00kB/s 0:00:00 (xfr#1, to-chk=0/1)
Updating boot config file
Initializing persistent overlay file
500+0 records in
500+0 records out
524288000 bytes (524 MB) copied, 216.717 s, 2.4 MB/s
Initializing persistent /home
800+0 records in
800+0 records out
838860800 bytes (839 MB) copied, 344.643 s, 2.4 MB/s
Formatting unencrypted /home
mke2fs 1.42.8 (20-Jun-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
51296 inodes, 204800 blocks
10240 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=209715200
7 block groups
32768 blocks per group, 32768 fragments per group
7328 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840
Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
tune2fs 1.42.8 (20-Jun-2013)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Installing boot loader
Target device is now set up with a Live image!
</pre>}}
<li> Shutdown the physical machine.</li>
<li> Shutdown the physical machine.</li>
<li> [[Sugar on a Stick/Boot|Reboot your computer]] from the newly-installed Live USB with Sugar on a Stick.</li>
<li> [[Sugar on a Stick/Boot|Reboot your computer]] from the newly-installed Live USB with Sugar on a Stick.</li>
</ol></ul>
</ol>
* '''2. Use Fedora Live USB Creator'''
* '''2. Use Fedora Live USB Creator'''
*: (This installation method is NOT recommended for LONG-TERM usage of Sugar on a Stick!! Catastrophic data corruption may occur when the USB stick gets full! [[fedora:LiveOS_image#Home_filesystem|See why.]])
*: (This installation method is NOT recommended for LONG-TERM usage of Sugar on a Stick!! Catastrophic data corruption may occur when the USB stick gets full! [[fedora:LiveOS_image#Home_filesystem|See why.]])
*# Download the Live USB Creator from [http://fedorahosted.org/liveusb-creator/ Fedora].
*# Download the Live USB Creator from [http://fedorahosted.org/liveusb-creator/ Fedora].
*# Insert a USB flash drive (or SD Card<sup> [[#Notes|Notes]]</sup>) with 2 GB or more of free space into your computer.
*# Insert a USB flash drive (or SD Card<sup> [[#Notes|Notes]]</sup>) with 2 GB or more of free space into your computer.
*# Launch Live USB Creator.
*# Launch Live USB Creator.
*# Select the 'Browse' button to 'Use existing Live CD' and find the downloaded .iso file image on your system.
*# Select Either
*# Adjust the Persistent Storage slider. This enables you to save changes to the system and additional Sugar Activities onto the device.
*# 1) the 'Browse' button to 'Use existing Live CD' and find the downloaded .iso file image on your system.
*# Select your flash drive as the target, and click the '''Create Live USB''' button.
*# 2) Download Fedora and select Fedora-SoaS-{i386|x86_64}-{22|23} (This automates the download and checksum routine and directly burns to the USB/ SDCard
*# Adjust the Persistent Storage slider. This enables you to save changes to the system and additional Sugar Activities onto the device. (aka persistence file or Overlay --this space by default is write once only) --see below for additional way to make /home a rw overlay
*# Select your flash drive as the target, and click the '''Create Live USB''' button.
*# With the latest version of Fedora LiveUSB Creator you have TWO (2) option for burning method
*# 1) CP (non destructive) -- meaning you can still use the unused space on a larger (8-16-32-64Gb) usb for whatever post burn.
*# 2) DD ( the old school way) Note: THIS WILL destroy any previous data make sure you properly select the drive to use AND make backups of any pre-existing important data (you will not be easily able to retrieve overwritten data)
*# Wait for the process to finish, then close the Live USB Creator program.
*# Wait for the process to finish, then close the Live USB Creator program.
*# Stop your flash drive with the '''Safely Remove Hardware and Eject Media''' notification area icon dialog, and eject it.
*# Stop your flash drive with the '''Safely Remove Hardware and Eject Media''' notification area icon dialog, and eject it.