VirtualBox/Preparing a disk image: Difference between revisions

(21 intermediate revisions by 3 users not shown)

Line 1:

<noinclude>~~{{TOCright}}~~</noinclude>

==LiveOS image==

Below are instructions for preparing a VirtualBox disk image from a SoaS iso image file. The process parallels the compressed [[LiveOS image]] used on Live CD and Live USB installations.

* (Taken from Dave Bauer's posting at http://schools.sugarlabs.org/mod/forum/discuss.php?d=27.)

* Updated 16 August 2010 with [http://www.virtualbox.org/wiki/Downloads VirtualBox 3.2.8] and 32-bit Fedora.

~~Instructions for preparing a VirtualBox disk image from a SoaS iso image file.~~

:(~~Taken from Dave Bauer~~'~~s posting at http~~:~~//schools~~.~~sugarlabs~~.~~org/mod/forum/discuss.php?d=27~~.)

('''Note:''' The SoaS .iso distribution also contains an installer for full, uncompressed, hard disc images of Fedora with the Sugar graphical interface. See [[#Uncompressed, hard disc image|Uncompressed, hard disc image]] below for instructions.)

==Installing SoaS iso image==

===Installing SoaS .iso image===

# Create a new VM.

# Create a new VM, choose a name, such as Mirabelle

# Choose Linux->Fedora

# Choose Linux for the Operating System and Version Fedora (use 64 bit, if available)

# Choose ~~256MB~~

# Choose Base Memory Size: 256 MB to match an XO-1, 512 or 1024 MB to match an XO-1.5

# Create a new disk image~~, 2GB~~

# Create a new virtual hard disk image with dynamically expanding storage of 2 GB

# Finish.

# Download the lastest SoaS, http://~~download~~.~~sugarlabs~~.org/soas/~~snapshots/2/?C=M;O=D~~, for Fedora~~-12~~.

# Download the lastest SoaS, http://spins.fedoraproject.org/soas/#downloads, for Fedora 13.

# Mount SoaS ~~ISO~~ as a CD-ROM in the newly created VM.

# Mount the SoaS .iso image file as a CD-ROM in the newly created VM.

# Change Network ~~Adapter to Intel Pro/1000 MT Desktop (82540EM)~~

# Change the Network Attached to: Bridged Adapter (This allows for networking with the host computer.)

~~#* recommended by VirtualBox for modern hosts -- Default of PCnet-FAST III (Am79C973) also worked on Ubuntu 8.10 and Vista hosts.~~

# Start the VM

~~#* Select~~ Attached to: ~~Host Interface --~~ allows ~~local~~ networking ~~for SSH connections to probe~~ the ~~file system~~.

# Enter an account name and startup Sugar.

# ~~Boot~~ VM

# ~~Type you~~ name and startup Sugar.

# Open Terminal.

# su -

# {{Code|su -}}

# parted ~~/dev/sda~~

# {{Code|parted}}

# mklabel msdos ~~-- make~~ partition table

# {{Code|mklabel msdos}}

# ~~mkpartfs~~ primary ext2 0 2048

#: This makes a partition table.

# toggle 1 boot

# {{Code|mkpart primary ext2 0 2048}}

# quit

#: You will receive this message: Warning: The resulting partition is not properly aligned for best performance. Ignore/Cancel?

# ~~umount~~ /dev/sda1 ~~-- (not required with soas-2-blueberry.iso)~~

#: Enter (I)gnore

# ~~/media/soas-2-blueberry~~/LiveOS/livecd-iso-to-disk --overlay-size-mb ~~400~~ /dev/sr0 /dev/sda1

# {{Code|toggle 1 boot}}

#: (for earlier versions of SoaS~~, like~~ Strawberry, use /mnt/live/LiveOS/livecd-iso-to-disk ...~~ soas05~~.~~iso carries an incompatible version of~~ livecd-iso-to-disk, ~~see [http~~://~~bugs~~.~~launchpad~~.~~net~~/~~soas~~/~~+bug~~/~~417415 this bug report]~~.)

# {{Code|quit}}

#* the --overlay-size-mb NNN ~~option~~ creates space for persistence of changes on the disk; otherwise, a liveOS disk is read-only.

# {{Code|mke2fs /dev/sda1}}

#: The following optional parameters seem to be incompatible with soas-1-strawberry and soas-2-blueberry released versions. (The script completes successfully, but the virtual machine startup process has trouble finding the home directory and fails to complete.)

# {{Code|/LiveOS/livecd-iso-to-disk --overlay-size-mb 1024 --home-size-mb 200 --delete-home --unencrypted-home /dev/sr0 /dev/sda1}} (for earlier versions of SoaS

#* the --home-size-mb NNN option creates space for ~~saving~~ the /home/liveuser folder if you want to update the OS image while keeping the user files~~. (In this case~~, skip the new disk creation and parted steps ~~and~~ leave out the --home-size-mb NNN option at this step and continue on.)

#: Blueberry - use /media/soas-2-blueberry/LiveOS/livecd-iso-to-disk Strawberry - use /mnt/live/LiveOS/livecd-iso-to-disk)

#* the --unencrypted-home option prevents password protection and encryption on the /home/liveuser folder. This releaves the overhead on the compressed ~~squashfs~~ and should be more robust to file system failures (outside of security).

<ul>

#* the --delete-home option is used to avoid an error message while requesting both a new home (with --home-size-mb) and a persistent home (with--unencrypted-home). You wouldn't use this option ~~on an~~ upgrade.

{{Show|<Terminal log>

# shutdown -h now

|<pre>

[root@localhost ~]# parted

GNU Parted 2.1

Using /dev/sda

Welcome to GNU Parted! Type 'help' to view a list of commands.

(parted) mklabel msdos

(parted) mkpart primary ext2 0 2048

Warning: The resulting partition is not properly aligned for best performance.

Ignore/Cancel? I

(parted) toggle 1 boot

(parted) quit

Information: You may need to update /etc/fstab.

[root@localhost ~]# mke2fs /dev/sda1

mke2fs 1.41.10 (10-Feb-2009)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

125184 inodes, 500000 blocks

25000 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=515899392

16 block groups

32768 blocks per group, 32768 fragments per group

7824 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376, 294912

Writing inode tables: done

Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 36 mounts or

180 days, whichever comes first. Use tune2fs -c or -i to override.

[root@localhost ~]#

[root@localhost ~]# /LiveOS/livecd-iso-to-disk --overlay-size-mb 1024 --home-size-mb 200 --delete-home --unencrypted-home /dev/live /dev/sda1

Verifying image...

/dev/sr0: 0ce28e3947106fd37bab9317abf09938

Fragment sums: a3c6e5fd5fba11d2b4da71771e8732b63bcb62b841971f7f39ab5c187f64

Fragment count: 20

Checking: 100.0%

The media check is complete, the result is: PASS.

It is OK to use this media.

Copying live image to USB stick

Updating boot config file

Initializing persistent overlay file

0+0 records in

0+0 records out

0 bytes (0 B) copied, 0.000150187 s, 0.0 kB/s

Initializing persistent /home

0+0 records in

0+0 records out

0 bytes (0 B) copied, 0.0039562 s, 0.0 kB/s

Formatting unencrypted /home

mke2fs 1.41.10 (10-Feb-2009)

Filesystem label=

OS type: Linux

Block size=1024 (log=0)

Fragment size=1024 (log=0)

Stride=0 blocks, Stripe width=0 blocks

51200 inodes, 204800 blocks

10240 blocks (5.00%) reserved for the super user

First data block=1

Maximum filesystem blocks=67371008

25 block groups

8192 blocks per group, 8192 fragments per group

2048 inodes per group

Superblock backups stored on blocks:

8193, 24577, 40961, 57345, 73729

Writing inode tables: done

Creating journal (4096 blocks): done

Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 26 mounts or

180 days, whichever comes first. Use tune2fs -c or -i to override.

tune2fs 1.41.10 (10-Feb-2009)

Setting maximal mount count to -1

Setting interval between checks to 0 seconds

Installing boot loader

/media/usbdev.XB8shz/syslinux is device /dev/sda1

USB stick set up as live image!

</pre>}}

* the --overlay-size-mb NNN and --home-size-mb NNN options creates space for persistence of changes on the disk; otherwise, a liveOS disk is read-only. See [[LiveOS image]].

: The following optional parameters seem to be incompatible with soas-1-strawberry and soas-2-blueberry released versions. (The script completes successfully, but the virtual machine startup process has trouble finding the home directory and fails to complete.)

* the --home-size-mb NNN option creates space for file storage in the /home/liveuser folder. (In the case where you you want to update the LiveOS image while keeping the user files, skip the new disk creation and parted steps, leave out the --home-size-mb NNN option at this step, and continue on.)

* the --unencrypted-home option prevents password protection and encryption on the /home/liveuser folder. This releaves the overhead on the compressed [[wikipedia:SquashFS|SquashFS]], and should be more robust to file system failures (outside of security).

* the --delete-home option is used to avoid an error message while requesting both a new home (with --home-size-mb) and a persistent home (with --unencrypted-home). (You wouldn't use this option for the LiveOS upgrade case.)

</ul>

<li> {{Code|shutdown -h now}}</li>

</ol>

==Installing VirtualBox Guest Additions==

# Unmount ~~CDROM~~ in VirtualBox settings

The VirtualBox Guest Additions requires installing [[wikipedia:Dynamic_Kernel_Module_Support|DKMS]] and compiling virtual device drivers for the Linux kernel.

# ~~Mount VBoxGuestAdditions.iso in its place.~~

# Unmount CD/DVD in VirtualBox settings, select 'Empty' for the CD/DVD device under 'Attributes'

~~# Boot VM~~

# Start the virtual machine

# Open Terminal

# su -

# {{Code|su -}}

# yum install dkms gcc ~~make~~

#: (Other dependencies will be called into the installation.)

<li>Determine the kernel version,

{{Code|uname -a}}

<pre>

Linux localhost.localdomain 2.6.33.3-85.fc13.i686 #1 SMP Thu May 6 18:44:12 UTC 2010 i686 i686 i386 GNU/Linux</pre></li>

<li>For SoaS-Mirabelle, the kernel is Linux-2.6.33.3-85.fc13, so specific kernel-headers and kernel-devel are needed:

{{Code|yum install kernel-headers-2.6.33.3-85.fc13 kernel-devel-2.6.33.3-85.fc13 dkms gcc}}

: (Other dependencies will be called into the installation.)

<~~div class="NavFrame collapsed">~~

{{Show|<Successful Terminal log from 16 Aug 2010 with Fedora 32 bit>

~~<div class="NavHead">~~

|<pre>

~~yum.~~log:

[root@localhost ~]# yum install kernel-devel-2.6.33.3-85.fc13 kernel-headers-2.6.33.3-85.fc13 dkms gcc

~~</div>~~

~~<div class="NavContent"~~>

<pre>

[root@localhost ~]# yum install dkms gcc ~~make~~

Loaded plugins: presto, refresh-packagekit

~~fedora/metalink | 18 kB 00:00~~

~~fedora | 4.2 kB 00:00~~

~~fedora/primary_db | 9.7 MB 01:50~~

~~sugar | 1.3 kB 00:00~~

~~sugar/primary | 5.9 kB 00:00~~

~~sugar 25/25~~

~~updates/metalink | 17 kB 00:00~~

~~updates | 4.4 kB 00:00~~

~~updates/primary_db | 1.3 MB 00:14~~

Setting up Install Process

Resolving Dependencies

--> Running transaction check

---> Package dkms.noarch 0:2.1.0.1-1.fc12 set to be updated

--> Processing Dependency: ~~kernel~~-~~devel~~ for package: ~~dkms~~-2.1.~~0.1~~-1.~~fc12~~.~~noarch~~

---> Package gcc.i686 0:4.4.4-10.fc13 set to be updated

---~~> Package gcc~~.~~i686 0~~:4.4.2-7.~~fc12 set to be updated~~

--> Processing Dependency: cpp = 4.4.4-10.fc13 for package: gcc-4.4.4-10.fc13.i686

--> Processing Dependency: ~~cpp~~ = 4.4.2-7.~~fc12~~ for package: gcc-4.4.2-7.~~fc12~~.i686

--> Processing Dependency: libgomp = 4.4.4-10.fc13 for package: gcc-4.4.4-10.fc13.i686

--> Processing Dependency: cloog-ppl >= 0.15 for package: gcc-4.4.2-7.~~fc12~~.i686

--> Processing Dependency: libgcc >= 4.4.4-10.fc13 for package: gcc-4.4.4-10.fc13.i686

--> Processing Dependency: glibc-devel >= 2.2.90-12 for package: gcc-4.4.2-7.~~fc12~~.i686

--> Processing Dependency: cloog-ppl >= 0.15 for package: gcc-4.4.4-10.fc13.i686

---> Package ~~make~~.i686 1:3.81-18.~~fc12~~ set to be updated

--> Processing Dependency: glibc-devel >= 2.2.90-12 for package: gcc-4.4.4-10.fc13.i686

---> Package kernel-devel.i686 0:2.6.33.3-85.fc13 set to be installed

---> Package kernel-headers.i686 0:2.6.33.3-85.fc13 set to be updated

--> Running transaction check

---> Package cloog-ppl.i686 0:0.15.7-1.fc12 set to be updated

--> Processing Dependency: libppl.so.7 for package: cloog-ppl-0.15.7-1.fc12.i686

--> Processing Dependency: libppl_c.so.2 for package: cloog-ppl-0.15.7-1.fc12.i686

--> ~~Processing Dependency: libgmpxx.so.4 for package: cloog-ppl-0.15.7-1.fc12~~.i686

---> Package cpp.i686 0:4.4.4-10.fc13 set to be updated

~~--> Processing Dependency: libppl.so.7 for package: cloog-ppl-~~0~~.15.7-1.fc12.i686~~

---> Package glibc-devel.i686 0:2.12-3 set to be updated

~~--> Processing Dependency~~: ~~libgmp~~.so.~~3 for package: cloog-ppl-0.15.7~~-1.~~fc12.i686~~

--> Processing Dependency: glibc = 2.12-3 for package: glibc-devel-2.12-3.i686

---> Package ~~cpp~~.i686 0:~~4.4~~.2-~~7.fc12~~ set to be updated

--> Processing Dependency: glibc-headers = 2.12-3 for package: glibc-devel-2.12-3.i686

--> Processing Dependency: ~~libmpfr~~.~~so.1~~ for package: ~~cpp~~-~~4.4.~~2~~-7.fc12~~.~~i686~~

--> Processing Dependency: glibc-headers for package: glibc-devel-2.12-3.i686

-~~--> Package glibc-devel~~.i686 ~~0:2.11-2 set to be updated~~

---> Package libgcc.i686 0:4.4.4-10.fc13 set to be updated

--> Processing Dependency: glibc-headers = 2.11-2 for package: glibc-devel-2.11-2.i686

---> Package libgomp.i686 0:4.4.4-10.fc13 set to be updated

--> Processing Dependency: glibc-headers for package: glibc-devel-2.11-2.i686

---> Package ~~kernel~~-~~devel~~.i686 0:2.6.~~31.6~~-~~145~~.~~fc12~~ set to be ~~installed~~

--> Running transaction check

~~---> Package glibc-headers.i686 0:2.11-2 set to be updated~~

--> Processing Dependency: glibc = 2.12-1 for package: glibc-common-2.12-1.i686

--> Processing Dependency: ~~kernel-headers >~~= 2.2.1 for package: glibc-~~headers~~-2.11-~~2.i686~~

---> Package glibc.i686 0:2.12-3 set to be updated

~~--> Processing Dependency: kernel-headers for package: glibc-headers-2.11-2~~.i686

---> Package glibc-headers.i686 0:2.12-3 set to be updated

---> Package ~~gmp~~.i686 0:4.3~~.1-5.fc12~~ set to be updated

---> Package ~~mpfr~~.i686 0:2.~~4.1~~-3~~.fc12~~ set to be updated

---> Package ppl.i686 0:0.10.2-10.fc12 set to be updated

--> Running transaction check

---> Package ~~kernel~~-~~headers~~.i686 0:2.~~6.31.6~~-~~145.fc12~~ set to be updated

---> Package glibc-common.i686 0:2.12-3 set to be updated

--> Finished Dependency Resolution

Dependencies Resolved

============================================================

=================================================================================================

Package Arch Version Repository

Package Arch Version Repository Size

Size

=================================================================================================

============================================================

Installing:

dkms noarch 2.1.0.1-1.fc12 fedora 95 k

gcc ~~i686~~ 4.4.2-7.~~fc12 fedora~~ 8.1 M

gcc i686 4.4.4-10.fc13 updates 8.1 M

~~make~~ i686 1:3~~.81~~-18.~~fc12~~ fedora ~~366~~ k

kernel-devel i686 2.6.33.3-85.fc13 fedora 6.3 M

kernel-headers i686 2.6.33.3-85.fc13 fedora 760 k

Installing for dependencies:

cloog-ppl i686 0.15.7-1.fc12 fedora 81 k

cpp ~~i686~~ 4.4.2-7.~~fc12 fedora~~ 3.3 M

cpp i686 4.4.4-10.fc13 updates 3.4 M

glibc-devel i686 2.11-~~2 fedora 951~~ k

glibc-devel i686 2.12-3 updates 960 k

glibc-headers i686 2.11-~~2 fedora 588~~ k

glibc-headers i686 2.12-3 updates 599 k

~~gmp~~ ~~i686 4~~.3.1-5.fc12 fedora ~~308 k~~

ppl i686 0.10.2-10.fc12 fedora 1.1 M

~~kernel-devel~~ i686 2.~~6.31.6~~-~~145.fc12~~ updates 5.9 M

Updating for dependencies:

~~kernel~~-~~headers~~ i686 2.~~6.31.6~~-~~145.fc12~~ updates ~~741 k~~

glibc i686 2.12-3 updates 4.3 M

~~mpfr~~ i686 2.4.1-3.~~fc12 fedora 145~~ k

glibc-common i686 2.12-3 updates 14 M

~~ppl~~ ~~i686 0~~.10.2-10.~~fc12 fedora 1.1 M~~

libgcc i686 4.4.4-10.fc13 updates 103 k

libgomp i686 4.4.4-10.fc13 updates 109 k

Transaction Summary

============================================================

=================================================================================================

Install 12 Package(s)

Install 9 Package(s)

Upgrade 0 Package(s)

Upgrade 4 Package(s)

Total download size: 22 M

Total download size: 40 M

Is this ok [y/N]: y

Downloading Packages:

Setting up and reading Presto delta metadata

~~fedora~~/prestodelta | ~~1.3~~ kB 00:00

updates/prestodelta | 87 kB 00:18

~~updates~~/prestodelta | ~~166 kB~~ 00:01

fedora/prestodelta | 414 B 00:00

Processing delta metadata

Package(s) data still to download: 22 M

Package(s) data still to download: 40 M

(1/12): cloog-ppl-0.15.7-1.fc12.i686 | 81 kB 00:01

(1/13): cloog-ppl-0.15.7-1.fc12.i686.rpm | 81 kB 00:06

(2/12): cpp-4.4.2-7.~~fc12~~.i686.rpm | 3.3 MB 00:38

(2/13): cpp-4.4.4-10.fc13.i686.rpm | 3.4 MB 01:47

(3/12): dkms-2.1.0.1-1.fc12.noarch.r | 95 kB 00:01

(3/13): dkms-2.1.0.1-1.fc12.noarch.rpm | 95 kB 00:09

(4/12): gcc-4.4.2-7.~~fc12~~.i686.rpm | 8.1 MB 01:34

(4/13): gcc-4.4.4-10.fc13.i686.rpm | 8.1 MB 04:06

(5/12): glibc~~-devel~~-2.11-2.i686.rpm | ~~951 kB~~ 00:10

(5/13): glibc-2.12-3.i686.rpm | 4.3 MB 01:50

(6/12): glibc-~~headers~~-2.11-2.i686.rp | ~~588 kB~~ 00:06

(6/13): glibc-common-2.12-3.i686.rpm | 14 MB 04:43

(7/12): ~~gmp~~-4.3.1-5.~~fc12~~.i686.rpm | ~~308~~ kB 00:03

(7/13): glibc-devel-2.12-3.i686.rpm | 960 kB 00:22

(8/12): kernel-devel-2.6.31.6-~~145~~.fc | 5.9 MB 01:09

(8/13): glibc-headers-2.12-3.i686.rpm | 599 kB 00:15

(9/12): kernel-headers-2.6.31.6-~~145~~. | ~~741~~ kB 00:08

(9/13): kernel-devel-2.6.33.3-85.fc13.i686.rpm | 6.3 MB 03:25

(10/12): ~~make~~-3.81-18.~~fc12~~.i686.rpm | ~~366~~ kB 00:04

(10/13): kernel-headers-2.6.33.3-85.fc13.i686.rpm | 760 kB 00:24

(11/12): ~~mpfr~~-2.4.1-3.~~fc12~~.i686.rpm | ~~145~~ kB 00:01

(11/13): libgcc-4.4.4-10.fc13.i686.rpm | 103 kB 00:05

(12/12): ppl-0.10.2-10.fc12.i686.rpm | 1.1 MB 00:13

(12/13): libgomp-4.4.4-10.fc13.i686.rpm | 109 kB 00:04

------------------------------------------------------------

(13/13): ppl-0.10.2-10.fc12.i686.rpm | 1.1 MB 00:26

Total 87 kB/s | 22 MB 04:15

-------------------------------------------------------------------------------------------------

Total 32 kB/s | 40 MB 21:10

Running rpm_check_debug

Running Transaction Test

~~Finished Transaction Test~~

Transaction Test Succeeded

Running Transaction

Installing : kernel-~~headers~~-2.6.31.6-~~145~~.~~fc12~~ 1/12

Installing : kernel-devel-2.6.33.3-85.fc13.i686 1/17

Installing : ~~glibc~~-headers-2.11-2.i686 2/12

Installing : kernel-headers-2.6.33.3-85.fc13.i686 2/17

~~Installing~~ : ~~glibc~~-~~devel~~-2.~~11-2~~.i686 3/12

Updating : libgcc-4.4.4-10.fc13.i686 3/17

Installing : ~~kernel-devel~~-2.6.31.6-~~145~~.fc12.i 4/12

Installing : dkms-2.1.0.1-1.fc12.noarch 4/17

~~Installing~~ : ~~gmp~~-4.3.1-5.~~fc12~~.i686 5/12

Updating : glibc-2.12-3.i686 5/17

Installing : ppl-0.10.2-10.fc12.i686 6/12

Updating : glibc-common-2.12-3.i686 6/17

Installing : cloog-ppl-0.15.7-1.fc12.i686 7/12

Updating : libgomp-4.4.4-10.fc13.i686 7/17

Installing : ~~mpfr~~-2.4.1-3.~~fc12~~.i686 8/12

Installing : ppl-0.10.2-10.fc12.i686 8/17

Installing : ~~cpp~~-4.4.2-~~7.fc12~~.i686 9/12

Installing : cloog-ppl-0.15.7-1.fc12.i686 9/17

Installing : ~~1:make~~-3.81-18.~~fc12~~.i686 10/12

Installing : cpp-4.4.4-10.fc13.i686 10/17

~~Installing~~ : ~~gcc~~-4.4.2-7.~~fc12~~.i686 11/12

Installing : glibc-headers-2.12-3.i686 11/17

~~Installing~~ : ~~dkms~~-2.1.0.1-1.~~fc12~~.~~noarch 12~~/12

Installing : glibc-devel-2.12-3.i686 12/17

Installing : gcc-4.4.4-10.fc13.i686 13/17

Cleanup : libgomp-4.4.4-2.fc13.i686 14/17

Cleanup : glibc-common-2.12-1.i686 15/17

Cleanup : glibc-2.12-1.i686 16/17

Cleanup : libgcc-4.4.4-2.fc13.i686 17/17

Installed:

dkms.noarch 0:2.1.0.1-1.fc12 gcc.i686 0:4.4.2-7.~~fc12~~

dkms.noarch 0:2.1.0.1-1.fc12 gcc.i686 0:4.4.4-10.fc13

~~make~~.i686 1:3.81-18.~~fc12~~

kernel-devel.i686 0:2.6.33.3-85.fc13 kernel-headers.i686 0:2.6.33.3-85.fc13

Dependency Installed:

cloog-ppl.i686 0:0.15.7-1.fc12

cloog-ppl.i686 0:0.15.7-1.fc12 cpp.i686 0:4.4.4-10.fc13 glibc-devel.i686 0:2.12-3

cpp.i686 0:4.4.2-7.~~fc12~~

glibc-headers.i686 0:2.12-3 ppl.i686 0:0.10.2-10.fc12

glibc-devel.i686 0:2.11-2

glibc-headers.i686 0:2.11-2

Dependency Updated:

~~gmp~~.i686 0:4.3.1-5.fc12

glibc.i686 0:2.12-3 glibc-common.i686 0:2.12-3 libgcc.i686 0:4.4.4-10.fc13

~~kernel-devel~~.i686 0:2.~~6.31.6~~-~~145.fc12~~

libgomp.i686 0:4.4.4-10.fc13

~~kernel~~-~~headers~~.i686 0:2.~~6.31.6~~-~~145.fc12~~

~~mpfr~~.i686 0:2.4.1-3.~~fc12~~

~~ppl~~.i686 0:0.10.2-10.~~fc12~~

Complete!

</pre>}} </li>

<li> In the VirtualBox Guest 'Devices Menu', select 'Install Guest Additions...'</li>

<li> {{Code|mkdir /mnt/cdrom}} </li>

<li> {{Code|mount /dev/sr0 /mnt/cdrom/}} </li>

<li> {{Code|cd /mnt/cdrom/}} </li>

<li> {{Code|./VBoxLinuxAdditions-x86.run}}

You may check the consumption status of the overlay by executing,

* {{Code|dmsetup status}}

: reveals that 953440/2097152 (512-byte sectors) or 448 MB of the 1024 MB overlay file has been consumed by the installation process

* If upgrading from one VirtualBox version to another, start with fresh virtual disks and machines built with the new versions to avoid breakage.

</li>

<li> {{Code|reboot}}

{{Show|<Terminal log:>

|<pre>

[root@localhost ~]# mkdir /mnt/cdrom/

[root@localhost ~]# mount /dev/sr0 /mnt/cdrom/

mount: block device /dev/sr0 is write-protected, mounting read-only

[root@localhost ~]# cd /mnt/cdrom/

[root@localhost cdrom]# ./VBoxLinuxAdditions-x86.run

Verifying archive integrity... All good.

Uncompressing VirtualBox 3.2.8 Guest Additions for Linux........

VirtualBox Guest Additions installer

Building the VirtualBox Guest Additions kernel modules

Building the main Guest Additions module [ OK ]

Building the shared folder support module [ OK ]

Building the OpenGL support module [ OK ]

Doing non-kernel setup of the Guest Additions [ OK ]

Starting the VirtualBox Guest Additions [ OK ]

Installing the Window System drivers

Installing X.Org Server 1.8 modules [ OK ]

Setting up the Window System to use the Guest Additions [ OK ]

You may need to restart the hal service and the Window System (or just restart

the guest system) to enable the Guest Additions.

Installing graphics libraries and desktop services componen[ OK ]

[root@localhost cdrom]# dmsetup status

live-osimg-min: 0 8388608 snapshot 2344/2344 24

live-rw: 0 8388608 snapshot 953440/2097152 3720

</pre>}}</li>

</ol>

<!--

* Note that you will need to have the same kernel version as you have kernel-headers and kernel-devel

* I recommend:

<pre>

# yum update kernel

# yum install kernel-headers kernel-devel dkms gcc

</pre>

* With the guest additions successfully installed, it should '''Not be necessary to configure the screen (below)'''

Thanks! for this information. update kernel consumed 203280/1048576 of the overlay and install kernel-headers kernel-devel dkms gcc raised consumption to 1047112/1048576 leading to failure of the ./VBoxLinuxAdditions-x86.run -->

==Configure Screen==

If you want to match the 16 bpp XO screen and a particular display size, you may

# Edit /etc/X11/xorg.conf to match the following section:

#* 832x624 - matches default XO display proportions

#* 1200x900 - XO reflective resolution

<pre>

# VirtualBox generated configuration file

# based on /etc/X11/xorg.conf.

Section "Monitor"

Identifier "Monitor[0]"

ModelName "VirtualBox Virtual Output"

VendorName "Sun Microsystems Inc"

EndSection

Section "Device"

BoardName "VirtualBox Graphics"

Driver "vboxvideo"

Identifier "Device[0]"

VendorName "Sun Microsystems Inc"

EndSection

Section "Screen"

Identifier "Screen[0]"

Device "Device[0]"

Monitor "Monitor[0]"

DefaultDepth 16

SubSection "Display"

Depth 16

Modes "832x624" "1200x900" "1024x768" "800x600"

EndSubSection

EndSection

</pre>

~~</div>~~

~~# go to VirtualBox Devices Menu->Install Guest Additions~~

~~# mkdir /mnt/cdrom~~

~~# mount /dev/sr0 /mnt/cdrom~~

~~# cd /mnt/cdrom~~

~~# ./VBoxLinuxAdditions-x86.run~~

~~#* (This stalled on two trials; had to reboot and restart.)~~

~~#* If upgrading from one VirtualBox version to another, start with fresh virtual disks and machines built with the new versions to avoid breakage.~~

~~# reboot~~

~~===Configure Screen===~~

~~# Edit /etc/X11/xorg.conf to match the following section: (This is for 1200x900 (XO) and other resolutions.)~~

~~# Default xorg.conf for Xorg 1.5+ without PCI_TXT_IDS_PATH enabled.~~

#

~~# This file was created by VirtualBox Additions installer as it~~

~~# was unable to find any existing configuration file for X.~~

~~Section "Device"~~

~~Identifier "VirtualBox Video Card"~~

~~Driver "vboxvideo"~~

~~EndSection~~

#

~~# From example in section 4.3.2 of the VirtualBox Help manual:~~

#

~~Section "Screen"~~

~~Identifier "Default Screen"~~

~~Device "VirtualBox Video Card"~~

~~Monitor "Generic Monitor"~~

~~DefaultDepth 16~~

~~SubSection "Display"~~

~~Depth 16~~

~~Modes "1200x900" "1024x768" "800x600" "640x480"~~

~~EndSubSection~~

~~EndSection~~

==Clear user data==

Finally,

Line 225:

Line 367:

==SSH connections==

To enable SSH communications, we need to ~~open the firewall for SSH,~~ permit no ~~password for~~ the ssh ~~deamon, and start the sshd service~~:

To enable SSH communications, we need to permit no passwords (to match the default Sugar configuration) in the ssh daemon configuration:

# in Terminal,

# su -

# ~~system-config-firewall~~

# vi /etc/ssh/sshd_config

~~## close the startup warning dialog~~

~~## check mark the SSH service~~

~~## click the apply action button, approve change~~

~~## File>Quit~~

~~# pico~~ /etc/ssh/sshd_config

## [add] PermitEmptyPasswords yes

## ^O (~~WriteOut~~), <~~Enter~~> on ~~File~~ Name ~~to Write~~: /~~etc~~/~~ssh~~/~~sshd_config~~ , ^X (~~Exit~~)

## :wq <Enter>

~~# chkconfig~~ --~~level 345 sshd on~~

# service sshd restart

~~# service sshd start~~

One may also supply a password for the root user:

# su -

# passwd

#: Changing password for user root. New password: Retype new password: passwd: all authentication tokens updated successfully.

==Uncompressed, hard disc image==

:'''Start VirtualBox (version 3.2.10 used here).'''

#Click NEW "Welcome to New Virtual Machine Wizard"

#<Next> fill out: Name (soas-i386-20101025) ; Operating system(Linux); Version (Fedora)

#<Next> Base Memory Size

#<Next> Create new hard disk

#<Next> Storage Type (Dynamically expanding storage)

#<Next> Size (8.00 GB)

#<Finish>

:'''Back on main Oracle VM VirtualBox screen'''

#Settings/Storage (CD Image0)CD/DVD Device: (Select your CD Host Drive-(sr0) with CD inserted

#<OK>

:'''Start'''

::SoaS will boot and run Sugar SoaS

::Enter Name color

::Enter Password ONE TIME then cancel next 6 times

::Start Sugar-Terminal

su

liveinst

:(Anaconda starts) Do normal HD install: Basic Storage Devices/ Reinitalize all/Host/TZ/Root Password/Use all Space/ Write Changes to Disk/ Install works to Completion.

:: "Congratulations, your Fedora Installation is complete" <Close> Quit sugar-terminal; Shutdown.

:'''Back on main Oracle VM VirtualBox screen'''

===Firstboot of new Virtual Machine===

::Settings/Storage; Host Drive: change to empty (You can also change boot order in Systems, if needed.)

:'''Start''' HD goes to firstboot (Answer questions); then to gdm login, then to Sugar. Click to Change Color_____ (hit <Back> to change name)

===Export your Appliance===

:File/Export Appliance (select soas-i386-20101025)<next> fill in Settings if you want to; <next> Export settings <Finish>

'''Congratulations, you have just created an importable/exportable appliance.'''

@@ Line 1: / Line 1: @@
-<noinclude>{{TOCright}}</noinclude>
+<noinclude></noinclude>
+==LiveOS image==
+Below are instructions for preparing a VirtualBox disk image from a SoaS iso image file.  The process parallels the compressed [[LiveOS image]] used on Live CD and Live USB installations.
+* (Taken from Dave Bauer's posting at http://schools.sugarlabs.org/mod/forum/discuss.php?d=27.)
+* Updated 16 August 2010 with [http://www.virtualbox.org/wiki/Downloads VirtualBox 3.2.8] and 32-bit Fedora.
-Instructions for preparing a VirtualBox disk image from a SoaS iso image file.
-:(Taken from Dave Bauer's posting at http://schools.sugarlabs.org/mod/forum/discuss.php?d=27.)
+('''Note:''' The SoaS .iso distribution also contains an installer for full, uncompressed, hard disc images of Fedora with the Sugar graphical interface. See [[#Uncompressed, hard disc image|Uncompressed, hard disc image]] below for instructions.)
-==Installing SoaS iso image==
+===Installing SoaS .iso image===
-# Create a new VM.
+# Create a new VM, choose a name, such as Mirabelle
-# Choose Linux->Fedora
+# Choose Linux for the Operating System and Version Fedora (use 64 bit, if available)
-# Choose 256MB
+# Choose Base Memory Size: 256 MB to match an XO-1, 512 or 1024 MB to match an XO-1.5
-# Create a new disk image, 2GB
+# Create a new virtual hard disk image with dynamically expanding storage of 2 GB
 # Finish.
-# Download the lastest SoaS, http://download.sugarlabs.org/soas/snapshots/2/?C=M;O=D, for Fedora-12.
+# Download the lastest SoaS, http://spins.fedoraproject.org/soas/#downloads, for Fedora 13.
-# Mount SoaS ISO as a CD-ROM in the newly created VM.
+# Mount the SoaS .iso image file as a CD-ROM in the newly created VM.
-# Change Network Adapter to Intel Pro/1000 MT Desktop (82540EM)
+# Change the Network Attached to: Bridged Adapter  (This allows for networking with the host computer.)
-#* recommended by VirtualBox for modern hosts -- Default of PCnet-FAST III (Am79C973) also worked on Ubuntu 8.10 and Vista hosts.
+# Start the VM
-#* Select Attached to: Host Interface -- allows local networking for SSH connections to probe the file system.
+# Enter an account name and startup Sugar.
-# Boot VM
-# Type you name and startup Sugar.
 # Open Terminal.
-# su -
+# {{Code|su -}}
-# parted /dev/sda
+# {{Code|parted}}
-# mklabel msdos -- make partition table
+# {{Code|mklabel msdos}}
-# mkpartfs primary ext2 0 2048
+#: This makes a partition table.
-# toggle 1 boot
+# {{Code|mkpart primary ext2 0 2048}}
-# quit
+#: You will receive this message:<br>Warning: The resulting partition is not properly aligned for best performance.<br>Ignore/Cancel?
-# umount /dev/sda1  -- (not required with soas-2-blueberry.iso)
+#: Enter (I)gnore
-# /media/soas-2-blueberry/LiveOS/livecd-iso-to-disk --overlay-size-mb 400 /dev/sr0 /dev/sda1
+# {{Code|toggle 1 boot}}
-#: (for earlier versions of SoaS, like Strawberry, use /mnt/live/LiveOS/livecd-iso-to-disk ...<br>soas05.iso carries an incompatible version of livecd-iso-to-disk, see [http://bugs.launchpad.net/soas/+bug/417415 this bug report].)
+# {{Code|quit}}
-#* the --overlay-size-mb NNN option creates space for persistence of changes on the disk; otherwise, a liveOS disk is read-only.
+# {{Code|mke2fs /dev/sda1}}
-#: <br>The following optional parameters seem to be incompatible with soas-1-strawberry and soas-2-blueberry released versions.  (The script completes successfully, but the virtual machine startup process has trouble finding the home directory and fails to complete.)
+# {{Code|/LiveOS/livecd-iso-to-disk --overlay-size-mb 1024 --home-size-mb 200 --delete-home --unencrypted-home /dev/sr0 /dev/sda1}}<br>(for earlier versions of SoaS
-#* the --home-size-mb NNN option creates space for saving the /home/liveuser folder if you want to update the OS image while keeping the user files.  (In this case, skip the new disk creation and parted steps and leave out the --home-size-mb NNN option at this step and continue on.)
+#: Blueberry - use /media/soas-2-blueberry/LiveOS/livecd-iso-to-disk<br>Strawberry - use /mnt/live/LiveOS/livecd-iso-to-disk)
-#* the --unencrypted-home option prevents password protection and encryption on the /home/liveuser folder. This releaves the overhead on the compressed squashfs and should be more robust to file system failures (outside of security).
+<ul>
-#* the --delete-home option is used to avoid an error message while requesting both a new home (with --home-size-mb) and a persistent home (with--unencrypted-home).  You wouldn't use this option on an upgrade.
+{{Show|<Terminal log>
-# shutdown -h now
+|<pre>
+[root@localhost ~]# parted
+GNU Parted 2.1
+Using /dev/sda
+Welcome to GNU Parted! Type 'help' to view a list of commands.
+(parted) mklabel msdos
+(parted) mkpart primary ext2 0 2048
+Warning: The resulting partition is not properly aligned for best performance.
+Ignore/Cancel? I
+(parted) toggle 1 boot
+(parted) quit
+Information: You may need to update /etc/fstab.
+[root@localhost ~]# mke2fs /dev/sda1
+mke2fs 1.41.10 (10-Feb-2009)
+Filesystem label=
+OS type: Linux
+Block size=4096 (log=2)
+Fragment size=4096 (log=2)
+Stride=0 blocks, Stripe width=0 blocks
+inodes, 500000 blocks
+blocks (5.00%) reserved for the super user
+First data block=0
+Maximum filesystem blocks=515899392
+block groups
+blocks per group, 32768 fragments per group
+inodes per group
+Superblock backups stored on blocks:
+, 98304, 163840, 229376, 294912
+Writing inode tables: done
+Writing superblocks and filesystem accounting information: done
+This filesystem will be automatically checked every 36 mounts or
+days, whichever comes first.  Use tune2fs -c or -i to override.
+[root@localhost ~]#
+[root@localhost ~]# /LiveOS/livecd-iso-to-disk --overlay-size-mb 1024 --home-size-mb 200 --delete-home --unencrypted-home /dev/live /dev/sda1
+Verifying image...
+/dev/sr0:   0ce28e3947106fd37bab9317abf09938
+Fragment sums: a3c6e5fd5fba11d2b4da71771e8732b63bcb62b841971f7f39ab5c187f64
+Fragment count: 20
+Checking: 100.0%
+The media check is complete, the result is: PASS.
+It is OK to use this media.
+Copying live image to USB stick
+Updating boot config file
+Initializing persistent overlay file
++0 records in
++0 records out
+bytes (0 B) copied, 0.000150187 s, 0.0 kB/s
+Initializing persistent /home
++0 records in
++0 records out
+bytes (0 B) copied, 0.0039562 s, 0.0 kB/s
+Formatting unencrypted /home
+mke2fs 1.41.10 (10-Feb-2009)
+Filesystem label=
+OS type: Linux
+Block size=1024 (log=0)
+Fragment size=1024 (log=0)
+Stride=0 blocks, Stripe width=0 blocks
+inodes, 204800 blocks
+blocks (5.00%) reserved for the super user
+First data block=1
+Maximum filesystem blocks=67371008
+block groups
+blocks per group, 8192 fragments per group
+inodes per group
+Superblock backups stored on blocks:
+, 24577, 40961, 57345, 73729
+Writing inode tables: done
+Creating journal (4096 blocks): done
+Writing superblocks and filesystem accounting information: done
+This filesystem will be automatically checked every 26 mounts or
+days, whichever comes first.  Use tune2fs -c or -i to override.
+tune2fs 1.41.10 (10-Feb-2009)
+Setting maximal mount count to -1
+Setting interval between checks to 0 seconds
+Installing boot loader
+/media/usbdev.XB8shz/syslinux is device /dev/sda1
+USB stick set up as live image!
+</pre>}}
+* the --overlay-size-mb NNN and --home-size-mb NNN options creates space for persistence of changes on the disk; otherwise, a liveOS disk is read-only. See [[LiveOS image]].
+: <br>The following optional parameters seem to be incompatible with soas-1-strawberry and soas-2-blueberry released versions.  (The script completes successfully, but the virtual machine startup process has trouble finding the home directory and fails to complete.)
+* the --home-size-mb NNN option creates space for file storage in the /home/liveuser folder.  (In the case where you you want to update the LiveOS image while keeping the user files, skip the new disk creation and parted steps, leave out the --home-size-mb NNN option at this step, and continue on.)
+* the --unencrypted-home option prevents password protection and encryption on the /home/liveuser folder. This releaves the overhead on the compressed [[wikipedia:SquashFS|SquashFS]], and should be more robust to file system failures (outside of security).
+* the --delete-home option is used to avoid an error message while requesting both a new home (with --home-size-mb) and a persistent home (with --unencrypted-home).  (You wouldn't use this option for the LiveOS upgrade case.)
+</ul>
+<ol start=20>
+<li> {{Code|shutdown -h now}}</li>
+</ol>
 ==Installing VirtualBox Guest Additions==
-# Unmount CDROM in VirtualBox settings
+The VirtualBox Guest Additions requires installing [[wikipedia:Dynamic_Kernel_Module_Support|DKMS]] and compiling virtual device drivers for the Linux kernel.
-# Mount VBoxGuestAdditions.iso in its place.
+# Unmount CD/DVD in VirtualBox settings, select 'Empty' for the CD/DVD device under 'Attributes'
-# Boot VM
+# Start the virtual machine
 # Open Terminal
-# su -
+# {{Code|su -}}
-# yum install dkms gcc make
+<ol start=5>
-#: (Other dependencies will be called into the installation.)
+<li>Determine the kernel version,<br>
+{{Code|uname -a}}<br>
+<pre>
+Linux localhost.localdomain 2.6.33.3-85.fc13.i686 #1 SMP Thu May 6 18:44:12 UTC 2010 i686 i686 i386 GNU/Linux</pre></li>
+<li>For SoaS-Mirabelle, the kernel is Linux-2.6.33.3-85.fc13, so specific kernel-headers and kernel-devel are needed:<br><br>
+{{Code|yum install kernel-headers-2.6.33.3-85.fc13 kernel-devel-2.6.33.3-85.fc13 dkms gcc}}<br>
+: (Other dependencies will be called into the installation.)
-<div class="NavFrame collapsed">
+{{Show|<Successful Terminal log from 16 Aug 2010 with Fedora 32 bit>
-<div class="NavHead">
+|<pre>
-yum.log:
+[root@localhost ~]# yum install kernel-devel-2.6.33.3-85.fc13 kernel-headers-2.6.33.3-85.fc13 dkms gcc
-</div>
-<div class="NavContent">
-<pre>
-[root@localhost ~]# yum install dkms gcc make
 Loaded plugins: presto, refresh-packagekit
-fedora/metalink                      |  18 kB     00:00
-fedora                               | 4.2 kB     00:00
-fedora/primary_db                    | 9.7 MB     01:50
-sugar                                | 1.3 kB     00:00
-sugar/primary                        | 5.9 kB     00:00
-sugar                                                 25/25
-updates/metalink                     |  17 kB     00:00
-updates                              | 4.4 kB     00:00
-updates/primary_db                   | 1.3 MB     00:14
 Setting up Install Process
 Resolving Dependencies
 --> Running transaction check
 ---> Package dkms.noarch 0:2.1.0.1-1.fc12 set to be updated
---> Processing Dependency: kernel-devel for package: dkms-2.1.0.1-1.fc12.noarch
+---> Package gcc.i686 0:4.4.4-10.fc13 set to be updated
----> Package gcc.i686 0:4.4.2-7.fc12 set to be updated
+--> Processing Dependency: cpp = 4.4.4-10.fc13 for package: gcc-4.4.4-10.fc13.i686
---> Processing Dependency: cpp = 4.4.2-7.fc12 for package: gcc-4.4.2-7.fc12.i686
+--> Processing Dependency: libgomp = 4.4.4-10.fc13 for package: gcc-4.4.4-10.fc13.i686
---> Processing Dependency: cloog-ppl >= 0.15 for package: gcc-4.4.2-7.fc12.i686
+--> Processing Dependency: libgcc >= 4.4.4-10.fc13 for package: gcc-4.4.4-10.fc13.i686
---> Processing Dependency: glibc-devel >= 2.2.90-12 for package: gcc-4.4.2-7.fc12.i686
+--> Processing Dependency: cloog-ppl >= 0.15 for package: gcc-4.4.4-10.fc13.i686
----> Package make.i686 1:3.81-18.fc12 set to be updated
+--> Processing Dependency: glibc-devel >= 2.2.90-12 for package: gcc-4.4.4-10.fc13.i686
+---> Package kernel-devel.i686 0:2.6.33.3-85.fc13 set to be installed
+---> Package kernel-headers.i686 0:2.6.33.3-85.fc13 set to be updated
 --> Running transaction check
 ---> Package cloog-ppl.i686 0:0.15.7-1.fc12 set to be updated
+--> Processing Dependency: libppl.so.7 for package: cloog-ppl-0.15.7-1.fc12.i686
 --> Processing Dependency: libppl_c.so.2 for package: cloog-ppl-0.15.7-1.fc12.i686
---> Processing Dependency: libgmpxx.so.4 for package: cloog-ppl-0.15.7-1.fc12.i686
+---> Package cpp.i686 0:4.4.4-10.fc13 set to be updated
---> Processing Dependency: libppl.so.7 for package: cloog-ppl-0.15.7-1.fc12.i686
+---> Package glibc-devel.i686 0:2.12-3 set to be updated
---> Processing Dependency: libgmp.so.3 for package: cloog-ppl-0.15.7-1.fc12.i686
+--> Processing Dependency: glibc = 2.12-3 for package: glibc-devel-2.12-3.i686
----> Package cpp.i686 0:4.4.2-7.fc12 set to be updated
+--> Processing Dependency: glibc-headers = 2.12-3 for package: glibc-devel-2.12-3.i686
---> Processing Dependency: libmpfr.so.1 for package: cpp-4.4.2-7.fc12.i686
+--> Processing Dependency: glibc-headers for package: glibc-devel-2.12-3.i686
----> Package glibc-devel.i686 0:2.11-2 set to be updated
+---> Package libgcc.i686 0:4.4.4-10.fc13 set to be updated
---> Processing Dependency: glibc-headers = 2.11-2 for package: glibc-devel-2.11-2.i686
+---> Package libgomp.i686 0:4.4.4-10.fc13 set to be updated
---> Processing Dependency: glibc-headers for package: glibc-devel-2.11-2.i686
----> Package kernel-devel.i686 0:2.6.31.6-145.fc12 set to be installed
 --> Running transaction check
----> Package glibc-headers.i686 0:2.11-2 set to be updated
+--> Processing Dependency: glibc = 2.12-1 for package: glibc-common-2.12-1.i686
---> Processing Dependency: kernel-headers >= 2.2.1 for package: glibc-headers-2.11-2.i686
+---> Package glibc.i686 0:2.12-3 set to be updated
---> Processing Dependency: kernel-headers for package: glibc-headers-2.11-2.i686
+---> Package glibc-headers.i686 0:2.12-3 set to be updated
----> Package gmp.i686 0:4.3.1-5.fc12 set to be updated
----> Package mpfr.i686 0:2.4.1-3.fc12 set to be updated
 ---> Package ppl.i686 0:0.10.2-10.fc12 set to be updated
 --> Running transaction check
----> Package kernel-headers.i686 0:2.6.31.6-145.fc12 set to be updated
+---> Package glibc-common.i686 0:2.12-3 set to be updated
 --> Finished Dependency Resolution
 Dependencies Resolved
-============================================================
+=================================================================================================
-  Package         Arch    Version             Repository
+  Package                  Arch             Version                       Repository         Size
-                                                       Size
+=================================================================================================
-============================================================
 Installing:
-  dkms            noarch  2.1.0.1-1.fc12      fedora    95 k
+  dkms                     noarch           2.1.0.1-1.fc12                fedora             95 k
-  gcc             i686    4.4.2-7.fc12        fedora   8.1 M
+  gcc                      i686             4.4.4-10.fc13                 updates           8.1 M
-  make            i686    1:3.81-18.fc12      fedora   366 k
+  kernel-devel             i686             2.6.33.3-85.fc13              fedora            6.3 M
+ kernel-headers           i686             2.6.33.3-85.fc13              fedora            760 k
 Installing for dependencies:
-  cloog-ppl       i686    0.15.7-1.fc12       fedora    81 k
+  cloog-ppl                i686             0.15.7-1.fc12                 fedora             81 k
-  cpp             i686    4.4.2-7.fc12        fedora   3.3 M
+  cpp                      i686             4.4.4-10.fc13                 updates           3.4 M
-  glibc-devel     i686    2.11-2              fedora   951 k
+  glibc-devel              i686             2.12-3                        updates           960 k
-  glibc-headers   i686    2.11-2              fedora   588 k
+  glibc-headers            i686             2.12-3                        updates           599 k
-  gmp             i686    4.3.1-5.fc12        fedora   308 k
+  ppl                      i686             0.10.2-10.fc12                fedora            1.1 M
-  kernel-devel    i686    2.6.31.6-145.fc12   updates  5.9 M
+Updating for dependencies:
-  kernel-headers  i686    2.6.31.6-145.fc12   updates  741 k
+  glibc                    i686             2.12-3                        updates           4.3 M
-  mpfr            i686    2.4.1-3.fc12        fedora   145 k
+  glibc-common             i686             2.12-3                        updates            14 M
-  ppl             i686    0.10.2-10.fc12      fedora   1.1 M
+  libgcc                   i686             4.4.4-10.fc13                 updates           103 k
+  libgomp                  i686             4.4.4-10.fc13                 updates           109 k
 Transaction Summary
-============================================================
+=================================================================================================
-Install      12 Package(s)
+Install       9 Package(s)
-Upgrade       0 Package(s)
+Upgrade       4 Package(s)
-Total download size: 22 M
+Total download size: 40 M
 Is this ok [y/N]: y
 Downloading Packages:
 Setting up and reading Presto delta metadata
-fedora/prestodelta                   | 1.3 kB     00:00
+updates/prestodelta                                                       |  87 kB     00:18
-updates/prestodelta                  | 166 kB     00:01
+fedora/prestodelta                                                        |  414 B     00:00
 Processing delta metadata
-Package(s) data still to download: 22 M
+Package(s) data still to download: 40 M
-(1/12): cloog-ppl-0.15.7-1.fc12.i686 |  81 kB     00:01
+(1/13): cloog-ppl-0.15.7-1.fc12.i686.rpm                                  |  81 kB     00:06
-(2/12): cpp-4.4.2-7.fc12.i686.rpm    | 3.3 MB     00:38
+(2/13): cpp-4.4.4-10.fc13.i686.rpm                                        | 3.4 MB     01:47
-(3/12): dkms-2.1.0.1-1.fc12.noarch.r |  95 kB     00:01
+(3/13): dkms-2.1.0.1-1.fc12.noarch.rpm                                    |  95 kB     00:09
-(4/12): gcc-4.4.2-7.fc12.i686.rpm    | 8.1 MB     01:34
+(4/13): gcc-4.4.4-10.fc13.i686.rpm                                        | 8.1 MB     04:06
-(5/12): glibc-devel-2.11-2.i686.rpm  | 951 kB     00:10
+(5/13): glibc-2.12-3.i686.rpm                                             | 4.3 MB     01:50
-(6/12): glibc-headers-2.11-2.i686.rp | 588 kB     00:06
+(6/13): glibc-common-2.12-3.i686.rpm                                      |  14 MB     04:43
-(7/12): gmp-4.3.1-5.fc12.i686.rpm    | 308 kB     00:03
+(7/13): glibc-devel-2.12-3.i686.rpm                                       | 960 kB     00:22
-(8/12): kernel-devel-2.6.31.6-145.fc | 5.9 MB     01:09
+(8/13): glibc-headers-2.12-3.i686.rpm                                     | 599 kB     00:15
-(9/12): kernel-headers-2.6.31.6-145. | 741 kB     00:08
+(9/13): kernel-devel-2.6.33.3-85.fc13.i686.rpm                            | 6.3 MB     03:25
-(10/12): make-3.81-18.fc12.i686.rpm  | 366 kB     00:04
+(10/13): kernel-headers-2.6.33.3-85.fc13.i686.rpm                         | 760 kB     00:24
-(11/12): mpfr-2.4.1-3.fc12.i686.rpm  | 145 kB     00:01
+(11/13): libgcc-4.4.4-10.fc13.i686.rpm                                    | 103 kB     00:05
-(12/12): ppl-0.10.2-10.fc12.i686.rpm | 1.1 MB     00:13
+(12/13): libgomp-4.4.4-10.fc13.i686.rpm                                   | 109 kB     00:04
-------------------------------------------------------------
+(13/13): ppl-0.10.2-10.fc12.i686.rpm                                      | 1.1 MB     00:26
-Total                        87 kB/s |  22 MB     04:15
+-------------------------------------------------------------------------------------------------
+Total                                                             32 kB/s |  40 MB     21:10
 Running rpm_check_debug
 Running Transaction Test
-Finished Transaction Test
 Transaction Test Succeeded
 Running Transaction
-   Installing     : kernel-headers-2.6.31.6-145.fc12    1/12
+   Installing     : kernel-devel-2.6.33.3-85.fc13.i686                                       1/17
-   Installing     : glibc-headers-2.11-2.i686           2/12
+   Installing     : kernel-headers-2.6.33.3-85.fc13.i686                                     2/17
-   Installing     : glibc-devel-2.11-2.i686             3/12
+   Updating       : libgcc-4.4.4-10.fc13.i686                                                3/17
-   Installing     : kernel-devel-2.6.31.6-145.fc12.i    4/12
+   Installing     : dkms-2.1.0.1-1.fc12.noarch                                               4/17
-   Installing     : gmp-4.3.1-5.fc12.i686               5/12
+  Updating       : glibc-2.12-3.i686                                                        5/17
-   Installing     : ppl-0.10.2-10.fc12.i686             6/12
+   Updating       : glibc-common-2.12-3.i686                                                 6/17
-   Installing     : cloog-ppl-0.15.7-1.fc12.i686        7/12
+  Updating       : libgomp-4.4.4-10.fc13.i686                                               7/17
-   Installing     : mpfr-2.4.1-3.fc12.i686              8/12
+   Installing     : ppl-0.10.2-10.fc12.i686                                                  8/17
-   Installing     : cpp-4.4.2-7.fc12.i686               9/12
+   Installing     : cloog-ppl-0.15.7-1.fc12.i686                                             9/17
-   Installing     : 1:make-3.81-18.fc12.i686           10/12
+   Installing     : cpp-4.4.4-10.fc13.i686                                                  10/17
-   Installing     : gcc-4.4.2-7.fc12.i686              11/12
+   Installing     : glibc-headers-2.12-3.i686                                               11/17
-   Installing     : dkms-2.1.0.1-1.fc12.noarch         12/12
+  Installing     : glibc-devel-2.12-3.i686                                                 12/17
+   Installing     : gcc-4.4.4-10.fc13.i686                                                  13/17
+   Cleanup        : libgomp-4.4.4-2.fc13.i686                                               14/17
+  Cleanup        : glibc-common-2.12-1.i686                                                15/17
+   Cleanup        : glibc-2.12-1.i686                                                       16/17
+  Cleanup        : libgcc-4.4.4-2.fc13.i686                                                17/17
 Installed:
-   dkms.noarch 0:2.1.0.1-1.fc12    gcc.i686 0:4.4.2-7.fc12
+   dkms.noarch 0:2.1.0.1-1.fc12                   gcc.i686 0:4.4.4-10.fc13
-   make.i686 1:3.81-18.fc12
+   kernel-devel.i686 0:2.6.33.3-85.fc13           kernel-headers.i686 0:2.6.33.3-85.fc13
 Dependency Installed:
-   cloog-ppl.i686 0:0.15.7-1.fc12
+   cloog-ppl.i686 0:0.15.7-1.fc12     cpp.i686 0:4.4.4-10.fc13      glibc-devel.i686 0:2.12-3
-  cpp.i686 0:4.4.2-7.fc12
+   glibc-headers.i686 0:2.12-3        ppl.i686 0:0.10.2-10.fc12
-  glibc-devel.i686 0:2.11-2
-   glibc-headers.i686 0:2.11-2
+Dependency Updated:
-  gmp.i686 0:4.3.1-5.fc12
+   glibc.i686 0:2.12-3              glibc-common.i686 0:2.12-3     libgcc.i686 0:4.4.4-10.fc13
-   kernel-devel.i686 0:2.6.31.6-145.fc12
+   libgomp.i686 0:4.4.4-10.fc13
-  kernel-headers.i686 0:2.6.31.6-145.fc12
-  mpfr.i686 0:2.4.1-3.fc12
-   ppl.i686 0:0.10.2-10.fc12
 Complete!
+</pre>}}<br></li>
+<li> In the VirtualBox Guest 'Devices Menu', select 'Install Guest Additions...'</li>
+<li> {{Code|mkdir /mnt/cdrom}} </li>
+<li> {{Code|mount /dev/sr0 /mnt/cdrom/}} </li>
+<li> {{Code|cd /mnt/cdrom/}} </li>
+<li> {{Code|./VBoxLinuxAdditions-x86.run}}<br><br>
+You may check the consumption status of the overlay by executing,
+* {{Code|dmsetup status}} <br>
+: reveals that 953440/2097152 (512-byte sectors) or 448 MB of the 1024 MB overlay file has been consumed by the installation process
+* If upgrading from one VirtualBox version to another, start with fresh virtual disks and machines built with the new versions to avoid breakage.<br>
+ </li>
+<li> {{Code|reboot}} <br>
+{{Show|<Terminal log:>
+|<pre>
+[root@localhost ~]# mkdir /mnt/cdrom/
+[root@localhost ~]# mount /dev/sr0 /mnt/cdrom/
+mount: block device /dev/sr0 is write-protected, mounting read-only
+[root@localhost ~]# cd /mnt/cdrom/
+[root@localhost cdrom]# ./VBoxLinuxAdditions-x86.run
+Verifying archive integrity... All good.
+Uncompressing VirtualBox 3.2.8 Guest Additions for Linux........
+VirtualBox Guest Additions installer
+Building the VirtualBox Guest Additions kernel modules
+Building the main Guest Additions module                   [  OK  ]
+Building the shared folder support module                  [  OK  ]
+Building the OpenGL support module                         [  OK  ]
+Doing non-kernel setup of the Guest Additions              [  OK  ]
+Starting the VirtualBox Guest Additions                    [  OK  ]
+Installing the Window System drivers
+Installing X.Org Server 1.8 modules                        [  OK  ]
+Setting up the Window System to use the Guest Additions    [  OK  ]
+You may need to restart the hal service and the Window System (or just restart
+the guest system) to enable the Guest Additions.
+Installing graphics libraries and desktop services componen[  OK  ]
+[root@localhost cdrom]# dmsetup status
+live-osimg-min: 0 8388608 snapshot 2344/2344 24
+live-rw: 0 8388608 snapshot 953440/2097152 3720
+</pre>}}</li>
+</ol>
+<!--
+* Note that you will need to have the same kernel version as you have kernel-headers and kernel-devel
+* I recommend:
+<pre>
+# yum update kernel
+# yum install kernel-headers kernel-devel dkms gcc
+</pre>
+* With the guest additions successfully installed, it should '''Not be necessary to configure the screen (below)'''
+Thanks! for this information.  update kernel consumed 203280/1048576 of the overlay and install kernel-headers kernel-devel dkms gcc raised consumption to 1047112/1048576 leading to failure of the ./VBoxLinuxAdditions-x86.run  -->
+==Configure Screen==
+If you want to match the 16 bpp XO screen and a particular display size, you may
+# Edit /etc/X11/xorg.conf to match the following section:
+#* 832x624 - matches default XO display proportions
+#* 1200x900 - XO reflective resolution
+<pre>
+# VirtualBox generated configuration file
+# based on /etc/X11/xorg.conf.
+Section "Monitor"
+  Identifier   "Monitor[0]"
+  ModelName    "VirtualBox Virtual Output"
+  VendorName   "Sun Microsystems Inc"
+EndSection
+Section "Device"
+  BoardName    "VirtualBox Graphics"
+  Driver       "vboxvideo"
+  Identifier   "Device[0]"
+  VendorName   "Sun Microsystems Inc"
+EndSection
+Section "Screen"
+  Identifier   "Screen[0]"
+  Device       "Device[0]"
+  Monitor      "Monitor[0]"
+  DefaultDepth 16
+  SubSection "Display"
+    Depth      16
+    Modes      "832x624" "1200x900" "1024x768" "800x600"
+  EndSubSection
+EndSection
 </pre>
-</div>
-</div>
-# go to VirtualBox Devices Menu->Install Guest Additions
-# mkdir /mnt/cdrom
-# mount /dev/sr0 /mnt/cdrom
-# cd /mnt/cdrom
-# ./VBoxLinuxAdditions-x86.run
-#* (This stalled on two trials; had to reboot and restart.)
-#* If upgrading from one VirtualBox version to another, start with fresh virtual disks and machines built with the new versions to avoid breakage.
-# reboot
-===Configure Screen===
-# Edit /etc/X11/xorg.conf to match the following section:   (This is for 1200x900 (XO) and other resolutions.)
- # Default xorg.conf for Xorg 1.5+ without PCI_TXT_IDS_PATH enabled.
- #
- # This file was created by VirtualBox Additions installer as it
- # was unable to find any existing configuration file for X.
- Section "Device"
-        Identifier "VirtualBox Video Card"
-        Driver "vboxvideo"
- EndSection
- #
- # From example in section 4.3.2 of the VirtualBox Help manual:
- #
- Section "Screen"
-        Identifier "Default Screen"
-        Device "VirtualBox Video Card"
-        Monitor "Generic Monitor"
-        DefaultDepth 16
-        SubSection "Display"
-                Depth 16
-                Modes "1200x900" "1024x768" "800x600" "640x480"
-        EndSubSection
- EndSection
 ==Clear user data==
 Finally,
@@ Line 225: / Line 367: @@
 ==SSH connections==
-To enable SSH communications, we need to open the firewall for SSH, permit no password for the ssh deamon, and start the sshd service:
+To enable SSH communications, we need to permit no passwords (to match the default Sugar configuration) in the ssh daemon configuration:
 # in Terminal,
 # su -
-# system-config-firewall
+# vi /etc/ssh/sshd_config
-## close the startup warning dialog
-## check mark the SSH service
-## click the apply action button, approve change
-## File>Quit
-# pico /etc/ssh/sshd_config
 ## [add] PermitEmptyPasswords yes
-## ^O (WriteOut), <Enter> on File Name to Write: /etc/ssh/sshd_config , ^X (Exit)
+## :wq <Enter>
-# chkconfig --level 345 sshd on
+# service sshd restart
-# service sshd start
+One may also supply a password for the root user:
+# su -
+# passwd
+#: Changing password for user root.<br>New password:<br>Retype new password:<br>passwd: all authentication tokens updated successfully.
+==Uncompressed, hard disc image==
+:'''Start VirtualBox (version 3.2.10 used here).'''
+#Click NEW  "Welcome to New Virtual Machine Wizard"
+#<Next> fill out: Name (soas-i386-20101025)  ; Operating system(Linux); Version (Fedora)
+#<Next> Base Memory Size
+#<Next> Create new hard disk
+#<Next> Storage Type (Dynamically expanding storage)
+#<Next> Size (8.00 GB)
+#<Finish>
+:'''Back on main Oracle VM VirtualBox screen'''
+#Settings/Storage (CD Image0)CD/DVD Device: (Select your CD Host Drive-(sr0) with CD inserted
+#<OK>
+:'''Start'''
+::SoaS will boot and run Sugar SoaS
+::Enter Name color
+::Enter Password ONE TIME then cancel next 6 times
+::Start Sugar-Terminal
+ su
+ liveinst
+:(Anaconda starts) Do normal HD install: Basic Storage Devices/ Reinitalize all/Host/TZ/Root Password/Use all Space/ Write Changes to Disk/ Install works to Completion.
+:: "Congratulations, your Fedora Installation is complete" <Close> Quit sugar-terminal; Shutdown.
+:'''Back on main Oracle VM VirtualBox screen'''
+===Firstboot of new Virtual Machine===
+::Settings/Storage; Host Drive: change to empty (You can also change boot order in Systems, if needed.)
+:'''Start''' HD goes to firstboot (Answer questions); then to gdm login, then to Sugar. Click to Change Color_____ (hit <Back> to change name)
+===Export your Appliance===
+:File/Export Appliance (select soas-i386-20101025)<next> fill in Settings if you want to; <next> Export settings <Finish>
+'''Congratulations, you have just created an importable/exportable appliance.'''