Sugar Labs

Testing/Reports/ARM RPi: Difference between revisions

← Older edit
Satellit (talk | contribs)
12,355 edits
Test report raspberrypi-fedora-remix-17
Satellit (talk | contribs)
12,355 edits
 
(140 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Test report raspberrypi-fedora-remix-17-test-001.img==
 
===Download===
*<- Back to [[Sugar_Creation_Kit/sck/Advanced_Topics#Raspberry_Pi_.2F_RPi|ARM RPi]]
*ftp://ftp.ges.redhat.com/raspberrypi/test-releases/raspberrypi-fedora-remix-17/20120723a/raspberrypi-fedora-remix-17-test-001.img.gz
==[[File:Fedora.jpg|40px|link=http://fedoraproject.org/]] Test report rpfr-f18-final.img==
::Updated Mar 17 2013
 
*Download:
:NEW: http://scotland.proximity.on.ca/raspberrypi/raspberrypi-fedora-remix/18/images/rpfr-f18-final.zip
: http://scotland.proximity.on.ca/raspberrypi/raspberrypi-fedora-remix/18/images/rpfr-f18-rc1.zip
: Older version that also works
===Write to SD card===
 
*http://elinux.org/RPi_Easy_SD_Card_Setup
:Detailed options for writing SD card.
*'''Unzip rpfr-f18-rc1.zip
====dd write SD====
*Using an SD adapter in a USB socket:
# dd if=rpfr-f18-rc1.img of=/dev/sd(x)  or /dev/mmcblk(x)
6144000+0 records in
6144000+0 records out
3145728000 bytes (3.1 GB) copied, 717.468 s, 4.4 MB/s
*'''/dev/sd(x) or /dev/mmcblk(x)'''
:Use command "mount" in terminal to get correct device name eg: /dev/sdb /dev/sdc /dev/sdd etc.
*'''If you are using a SD slot, you may see /dev/mmcblk(x)
# dd if=rpfr-f18-final.img of=/dev/mmcblk0
6144000+0 records in
6144000+0 records out
3145728000 bytes (3.1 GB) copied, 1001.65 s, 3.1 MB/s
 
*'''CAUTION''' the device name has to be correct or you can damage your computers drives with no warning.
 
===Insert SD Card===
*Insert SD in RPi and plug in the power supply mini usb
:Unplug this mini usb to shutdown RPi
*Connections
[[File:RPI-connections.JPG|700px]]
*Picture
[[File:RPi-B-512.JPG|700px]]
===Boot SD Card===
*Note this takes several minutes to do reach the first boot.
: Be Patient
*Firstboot
: TimeZone and Language
: user name and password
: root password
: select type of HDMI output
: resizes the SD / 
: swap settings  -  increase to 1024
*Log in
*Recommended: turn off screensaver
:Applications/settings/screensaver
::Mode "Disable Screensaver"
::File-Quit
 
===Install sugar-desktop===
yum groupinstall sugar-desktop
:::633kb | 133MB  138 files
yum install sugar-emulator
 
*To start '''SUGAR''' : Applications Menu: Education/Sugar
*sugar emulator running on RPi
[[File:Rpfr-fi18-rc1.png|500px]]
*rpfr-f18-rc1-a-sd.img file created with '''disk utility''' from working 8 GB SD card
:and then restored with '''disk utility''' to a 16 GB SD Card and booted on RPi 512 "b"
[[File:Sugar-rpfr-f18rc1.png|500px]]
*This screenshot added 03/18/2013
 
===Sugar===
*Build: Fedora remix release 18 (Raspberrypi Fedora Remix)
*Sugar: 0.98.2
====Create and read wiki-page.pdf files in LDXE and Sugar====
*You can Create wiki-page.pdf files in LDXE using the RPi to load on a USB for access in sugar-read :
:See: [[Tutorials/Tutorials.iso]]
:Browser in LDXE can print Wiki pages to a .pdf file
yum install evince
:evince is added so .pdf files can be read in LDXE
::Read in sugar already can open the .pdf files on a 2nd USB
*Evince reading Tutorials USB on LDXE Desktop
[[File:RPi-evince.JPG|500px]]
 
===[[Tutorials/Introduction_to_the_Sugar_Interface|Introduction to the sugar Interface]]===
* A tutorial to introduce the sugar-desktop to new users
===[[Testing/Reports/ARM_RPi/Duplicating_a_RPi_SD_Card|Duplicating a RPi SD Card]]===
*Duplicate a working SD Card
 
===Notes===
*To run sugar: log-out/log-in then choose sugar in switcher after you enter your user name.
*Information; http://zenit.senecac.on.ca/wiki/index.php/Raspberry_Pi_Fedora_Remix
*Sugar IRC-10 in RPi "B" 512 on rpfr-f18-rc1 (arm) and rpfr-17-xfce-r2 use IP6 ...all my other devices use IP4
...
In general newer versions of Fedora will try and autodiscover IPv6 networks.
If it finds one with a non-local (not fe80::) IP address it will get on it, and used the IPv6 routers spotted if present
Given a DNS name with both IPv4 & v6 addresses set, it's mostly up to the application to see if asks the OS to do v4, v6,
or just generically whichever the OS thinks makes the most sense
 
*How to write the SD in a MAC:http://alltheware.wordpress.com/2012/12/11/easiest-way-sd-card-setup/
:'''Warning a fee is charged for download'''
 
==[[File:Fedora.jpg|40px|link=http://fedoraproject.org/]] Test report rpfr-17-xfce-r2.img==
::Feb 12 2013
*http://zenit.senecac.on.ca/wiki/index.php/Raspberry_Pi_Fedora_Remix
*Download:http://scotland.proximity.on.ca/raspberrypi/f17-releases/v5/latest/rpfr-17-xfce-r2.zip
*Information: http://zenit.senecac.on.ca/wiki/index.php/Raspberry_Pi_Fedora_Remix
===Write to SD card===
*Unzip file
# dd if=rpfr-17-xfce-r2.img of=/dev/sdc
6144000+0 records in
6144000+0 records out
3145728000 bytes (3.1 GB) copied, 1056.07 s, 3.0 MB/s
 
===Boot DC Card===
*Firstboot
: select type of HDMI output
: resizes the SD /  and
: swap settings
===Install sugar-desktop===
yum groupinstall sugar-desktop
*38 packages (+93 Dependent packages)
:Download size 120 M
:Installed size 282 M
*Log out/Log In to XFCE or Sugar
 
===Sugar===
:Build: Fedora remix release 17 (Raspberrypi Fedora Remix)
:Sugar: 0.96.2
====Activities====
*DO NOT DO SOFTWARE UPDATE - Some activities will "Failed to start" if updated from My Settings/Software update
 
==[[File:Fedora.jpg|40px|link=http://fedoraproject.org/]] Test report raspberrypi-fedora-remix-17-test-004.img==
*'''RECOMMENDED'''
*http://scotland.proximity.on.ca/raspberrypi/test-releases/rpfr17/
Changes in this release:
- Image resize/swap space creation is now more reliable (note, however,
that it will take several minutes after the firstboot setup before the
resize/swap takes effect - the system may be used during this time). I
think we've probably nailed the last of the significant
firstboot/resize/swap issues.
- The image is now 1.852G in size and will fit a 2GB card (4GB or larger
card is recommended to allow plenty of space for data/extra
software/swap). The download is 665MB.
Next week we'll start performance tests with armv6 rebuilds (sfp & hfp)
and continue work on image size reduction and boot cutdown.
Chris Tyler 08/03/2012
===Write to SD Card===
===Write to SD Card===
*To use this image, boot a Fedora system, download the image, and execute this command:
*Outside of RPi
  zcat raspberrypi-fedora-remix-17-test-001.img.gz >/dev/X
  zcat raspberrypi-fedora-remix-17-test-004.img.gz >/dev/mmcblk0
*Where X represents your unmounted SD card device (typically starting with  "sd" or "mmcblk").
 
Do not use a partition device, use the device representing the entire SD card.
=== Boot SD Card===
*Alternate Method
*Insert the SD Card in the RPi
uncompress .gz file
*Connect all cables
in root terminal:
*Plug in power cord
dd if=raspberrypi-fedora-remix-17-test-001.img of=>/dev/X*
:This starts Boot
===Boot SDXC Card===
:Plug in power cord
*Firstboot
*Firstboot
'''Use Network time'''
there is no realtime clock on RPi (errors will occur if time is not set correctly)
  root password
  root password
  User and Password
  User and Password
  [x]user is part of administrator group
  [x]user is part of administrator group
  [x]resize with swap 128 MB
  [x]resize with swap 1024 MB - (move slider)
  [x] Graphical Boot
  [x] Graphical Boot
*log in (you are forced to change your password)
*Use default desktop config (XFCE)
===Use default desktop config (LDXE)===
*Change memory split:
: between the ARM CPU and the GPU,
:"The 004 test image defaults to 224/32 MB memory split - it is not necessary to change this split to use yum.
: The 240/16 firmware is now included in the image.
 
*Resize of File System and Creation of swap
"The SD card will be resized during the second boot.
"this will appear as the file /swap0 and will appear in both /etc/fstab and swapon -s "
  ctyler on #seneca
*Test SDXC Card
'''A 64 GB SDXC card resizes to:'''
fat 16 /boot  51.00 MB    boot, lba
ext4  rootfs 59.43 GiB
 
===Update firmware===
*Terminal:
su
(password)
#yum update
38 Pkgs/29M
:raspberry firmware and kernel included
*Change memory split:
*Change memory split:
:'''Required on this image to avoid freezes'''
:Required on this image to avoid out of memory condition when using yum to install
:In Terminal:
:"This image uses a  224/32 MB memory split between the ARM CPU and the GPU,
:instead of the more useful240M/16M. To change this, run this command:"
 
In Terminal:
  sudo su
  sudo su
  Password
  Password
  "This image uses a 128/128MB memory split between the ARM CPU and the GPU,
  cp /boot/arm240_start.elf /boot/start.elf
  instead of the more useful 192M/64M. To change this, run this command:"
*'''reboot'''
cp /boot/arm192_start.elf /boot/start.elf
 
===Install Sugar 0.96.2===
#yum install sugar*  77M  220M installed
 
===Start Sugar===
*Application Menu/education/sugar
:sugar-emulator starts
*Note the Raspberry Pi board on the right bottom of screenshot.
* The 1 AMP 5 Volt USB powersupply is marginal
:To insure that RPi gets adequate power, use a  powered 4 port USB Hub[1] for the USB Keyboard and USB Mouse
::[1] (Belkin)
 
===About my Computer===
Build:  Fedora remix release 17 (Raspberrypi Fedora Remix)
Sugar:  0.96.2
===Wireless Networking===
:Verified Peripherals: http://elinux.org/RPi_VerifiedPeripherals
*RPi USB Port 1: Powered 4 port USB Hub to run USB Mouse and USB keyboard.
*RPi USB Port 2 :'''D-link DWL-122 USB wireless adapter''' on a 12" USB extension cable.
:Connects to a WEP wireless AP
:Shows AD-HOC and wirelss AP's in sugar (f1) Network Neighbourhood.
[[File:RPi-Wireless.JPG|800px]]
 
===Disable Screen Saver===
*The screen still blanks after a while even with the screen saver disabled.
:to Fix:
Terminal:
xset s
xset -dpms
===Shutdown===
*only log off is offered in this test software
:To Shutdown the RPi:
Terminal:
  su
  (password)
  shutdown -h now
*Unplug the mini power Connector from RPi board (on the cable coming from the 1,0Amp 5 Volt power supply)
*Reboot occurs on re-plugging in this connector
 
==[[File:Mate.png|link=http://mate-desktop.org/]]Test report Raspbian-PiscesMATE.img==
:07/26/2011
*MATE is a fork of GNOME 2
:http://mate-desktop.org
===Download===
:http://www.raspbian.org/PiscesMATEImages
:http://archive.raspbian.org/images/rpi_pisces_mate_r1.zip
===Write to SDXC Card===
:Unzip
# dd if=rpi_pisces_mate_r1.img of=/dev/mmcblk0
===Boot SDXC Card===
*Cards tested:
:SanDisk Ultra SDXC 64 GB 30 MB/s
:SanDisk SDHC 8 GB 15 MB/s
*Do resize of SD Card here in another computer with gparted - (See section below)
:Use SD card to USB adapter if needed
*Boot RPi with the resized card.
The following two user accounts are created on this image:
Username        Password
root            raspbian
raspbian        raspbian
*Login to raspbian
:Startx
:boots to '''MATE Desktop Environment 1.2.0'''
apt-get update
dpkg-reconfigure tzdata -  Be sure it is correct
apt-get upgrade - 226 files
apt-get synaptic
 
===Test#1 Install Sugar-0.96 in Wheezy===
*synaptic:
:search for sugar
:Select:
::sugar-session-0.96 - 315 files
 
===About my Computer===
*Caution Keyring password is asked at start
:This password required to be used to start Jabber.sugarlabs.org
Build Debian GNU/Linux testing/unstable
Sugar 0.96.1
===Notes===
*1 Amp Power Supply is marginal with a Dell USB Keyboard and Dell USB Wheel-Mouse connected to the 2 supplied connectors on RPi
*'''Use a 4-Port Powered Desktop Hub  to connect them instead'''  (Belkin 4-port Powered Hub F4U20-8830-06939 Rev A00) worked
====Install More Activities in Sugar====
*Download the Activities you want to a USB from http://activities.sugarlabs.org/
*USB's do not Automount on insertion on the RPi
=====Mount/Unmount USB=====
*'''Mount USB'''
:Terminal:
sudo su
(password)
root@pisces:/home/raspbian# mount -t vfat /dev/sda1 /home/raspbian/USB
*USB appears on Desktop and in Sugar Frame when clicking on Journal
*[[Tutorials/Copy_with_drag_%26_drop|Drag Drop install xxxx.xo files]] from USB to the Sugar Journal
*'''Unmount USB'''
root@pisces:/home/raspbian# unmount /dev/sda1
 
===Activities===
Pippy        46
Turtle Art  98
 
===Test #2 Install sugar 0.88.1===
*continue but use ''apt-get dist-upgrade''
apt-get update
dpkg-reconfigure tzdata -  Be sure it is correct
apt-get dist-upgrade  -  Very Large update
 
===Install sugar-emulator-0.88===
apt-get install sugar-emulator-0.88 - Pulls in large set of gnome files
====About my Computer====
Build:      Debian GNU/Linux testing/unstable
Sugar:      0.88.1
====Activities====
Pippy            45
Turtle Art      98
Log              24
Terminal        28
Write            70
Calculate        40
Chat            76
Note: extra Activities added when installed
apt-get install sugar-emulator-0.86
then
apt-get install sugar-emulator-0.88
*Installed activities from 0.86 remained
 
== [[File:Debian.jpg|40px|link=https://wiki.debian.org/Sugar]] Test Report: rpi_pisces_r3.zip ==
:D/L: http://www.raspbian.org/PiscesImages
*r3 Image
"Mike Thompson has produced a publicly available SD image of Raspbian that is bootable on Raspberry Pi hardware.
This is called the "pisces" image as that is what Mike's Raspberry Pi system is named on his LAN.
  This image is a little newer and includes a more complete installation of Raspbian and LXDE than the more minimal Hexxeh image.
This image was created using the Debian installer so it reflects a minimal Debian installation with the LXDE packages added for a desktop."
*Once booted, log into one of the two existing accounts:
Username      Password
root          raspbian
raspbian      raspbian
*This version has a fake hardware clock as the RPi has no clock
===Install sugar 0.96===
apt-get install sugar-session-0.96
====About my Computer====
Build              Debian GNU/Linux testing/unstable
Sugar              0.96.1
 
:Starts at sugar: name - color selection screens
:Keyring password is set
:Jabber works.
====Activities====
Pippy        46
Turtle Art    98
*Still testing--[[User:Satellit|Satellit]] 17:22, 17 August 2012 (EDT)
 
== [[File:Debian.jpg|40px|link=https://wiki.debian.org/Sugar]] Test Report 2012-07-15-wheezy-raspbian.zip ==
:D/L: http://downloads.raspberrypi.org/images/raspbian/2012-07-15-wheezy-raspbian/2012-07-15-wheezy-raspbian.zip
:D/L: Minimal Image:http://www.linuxsystems.it/2012/06/raspbian-wheezy-armhf-raspberry-pi-minimal-image/
:UnZip and write to 8 GB SDHC Card with dd
*Boot SDHC Card
* Text mode Configuration screen:
                                                              values tested
Raspi-config                                           
info                information about this tool
expand_rootfs      Expand root partition to fill SD card    [x]
overscan            Change overscan
configure_keyboard  Set keyboard layout                      en-us
change_pass        Change password for 'pi' user            [x]
change_locale      Set locale                              [x]
change_timezone    Set timezone                            '''US-CA'''
memory_split        Change memory split                    '''224/32''' (default=192MB/64MB  (arm/videocore)
ssh                Enable or Disable ssh server
boot_behavior      Start desktop on boot?                  [x]
update              Try to upgrade raspi-config
    {Select}                      {Finish}
*Reboot
*Reboot
:Sucess..
:resize occurs
===Sugar-Desktop is not available===
:swap file is created
*No Fedora Repositories can be added (not available)
*RPi Desktop appears
== Test report Debian RPi Sugar 0.88 ==
*'''STILL TESTING'''--[[User:Satellit|Satellit]] 18:09, 5 August 2012 (EDT)
 
== [[File:Debian.jpg|40px|link=https://wiki.debian.org/Sugar]] Test report debian6-19-04-2012.img ==
:Debian info:https://wiki.debian.org/Sugar
:http://www.raspberrypi.org/downloads
:http://www.raspberrypi.org/downloads
:http://downloads.raspberrypi.org/images/debian/6/debian6-19-04-2012/debian6-19-04-2012.zip
:D/L: http://downloads.raspberrypi.org/images/debian/6/debian6-19-04-2012/debian6-19-04-2012.zip
:UnZip and write to 64 GB Ultra SDXC Card with dd
:UnZip and write to 64 GB Ultra SDXC Card with dd


Line 42: Line 385:
  password raspberry
  password raspberry
  startx
  startx
===Install sugar-0.88===
*LXTerminal:
*LXTerminal:
:Root password is not known but "sudo su" goes to root terminal
:Root password is not known but "sudo su" goes to root terminal
Line 69: Line 413:
*Tried loading synaptic but it freezes loading catalogues.  
*Tried loading synaptic but it freezes loading catalogues.  
:apt-get remove synaptic
:apt-get remove synaptic
====Get Sugar Journal full messages after several uses====
====Resize SD Card with gparted====
*Get Sugar Journal full messages after several uses
*Fix:
*Fix:
*Remove SDXC card - Insert in Laptop and start gparted
*Remove SDXC card - Insert in Laptop and start gparted
Retrieved from "https://wiki.sugarlabs.org/go/Testing/Reports/ARM_RPi"