XSCE: Difference between revisions

Line 249:

[[File:Schoolserver-content.png|700px]]

=F21-server-netinstall with ~~MATE~~=

=F21-server-netinstall with xfce=

*REF from : https://github.com/XSCE/xsce/blob/master/docs/INSTALL.rst

*REF from : https://github.com/XSCE/xsce/blob/master/docs/INSTALL.rst (modified by satellit here)

*option 1

:NUC with 1 TB HD

Line 268:

*Select "system"-installation destination:

:Device selection, click on hard disk, click checkbox for "I will configure partitioning", click done.

:In the left side window, under the drop down box, click <any previous OS> (unless the disk is already clean)

*In the left side window, under the drop down box, click <any previous OS> (unless the disk is already clean)

:Click on the minus (which deletes the selected partition), select the "delete all other filesystems in .. as well"

:Then select the drop down option "standard partition" and click the "+" at the ~~bottom~~

:Then select the drop down option "standard partition" and click the "install automatically" button

~~:In~~ the "add ~~a new mount point" window, click "/"~~

*edit the /home and decrease the size

:~~For the capacity enter the "total space"~~ at bottom ~~left of screen~~

*edit the / and add this capacity to it

:click update button at right bottom

:Click the done twice, and the accept changes

:Click on software selection, and ~~then on lower left of that page select "minimal-x install"~~

*Click on software selection, and xfce desktop

:~~Click on MATE (install DE), done~~

:in right pane:

::xfce extras; Admin tools; Devel Tools; Headless; SMB.

*Then click start install

:You will need to put in a password for root, during the install.

:You will need to put in a password for root, and xfce-admin as user during the install.

:At the end of the install, a button will appear, which asks you to reboot into the newly installed Operating System.

:Once you have ~~a console prompt~~, the steps are pretty straight forward:

:Once you have logged in:, the steps are pretty straight forward:

:Connect the wifi unit to the adapter that will be used as the local area network (LAN), and make sure everything is under power with link lights.

*Issue the following commands:

ping yahoo.com (this verifies that the server is properly connected to internet after the reboot)

~~yum -y update~~

yum -y install git ansible icecat

yum -y install git ansible

cd /opt

mkdir -p schoolserver

cd schoolserver

git clone https://github.com/XSCE/xsce ~~--branch stable --depth 1~~

git clone https://github.com/XSCE/xsce

cd xsce

./install-console

Line 303:

Line 304:

ip addr (verify that the external adapter and the LAN adapter or br0 have ip addresses)

*At this point you can connect to the server via the wifi at http://schoolserver/admin. Or with ~~firefox~~ from ~~MATE~~ desktop

*At this point you can connect to the server via the wifi at http://schoolserver/admin. Or with IceCat from xfce desktop

:Decide which services need to be enabled, check the checkboxes, ~~save the configuration~~, and click "~~install~~ configured ~~server~~'.

:Decide which services need to be enabled, check the checkboxes, Save Configuration, and click "Install configured Options'.

::Wait for "SUCCEED" in Utilities/Display job status.

:Next ~~download any content~~ needed for rachel, kiwix, and/or other instructional materials.

:Next Install Content needed for rachel, kiwix, and/or other instructional materials.

:: Note: '''Get Rachel''' only appears On Install Content if you checked the rachel check box in Configure services

:: There are instruction for how and where to place the downloaded materials in README files in each of the roles folders.

@@ Line 249: / Line 249: @@
 [[File:Schoolserver-content.png|700px]]
-=F21-server-netinstall with MATE=
+=F21-server-netinstall with xfce=
-*REF from : https://github.com/XSCE/xsce/blob/master/docs/INSTALL.rst
+*REF from : https://github.com/XSCE/xsce/blob/master/docs/INSTALL.rst  (modified by satellit here)
 *option 1
 :NUC with 1 TB HD
@@ Line 268: / Line 268: @@
 *Select "system"-installation destination:
 :Device selection, click on hard disk, click checkbox for "I will configure partitioning", click done.
-:In the left side window, under the drop down box, click <any previous OS> (unless the disk is already clean)
+*In the left side window, under the drop down box, click <any previous OS> (unless the disk is already clean)
 :Click on the minus (which deletes the selected partition), select the "delete all other filesystems in .. as well"
-:Then select the drop down option "standard partition" and click the "+" at the bottom
+:Then select the drop down option "standard partition" and click the "install automatically" button
-:In the "add a new mount point" window, click "/"
+*edit the /home and decrease the size
-:For the capacity enter the "total space" at bottom left of screen
+*edit the / and add this capacity to it
+:click update button at right bottom
 :Click the done twice, and the accept changes
-:Click on software selection, and then on lower left of that page select "minimal-x install"
+*Click on software selection, and xfce desktop
-:Click on MATE (install DE), done
+:in right pane:
+::xfce extras; Admin tools; Devel Tools; Headless; SMB.
 *Then click start install
-:You will need to put in a password for root, during the install.
+:You will need to put in a password for root, and xfce-admin as user during the install.
 :At the end of the install, a button will appear, which asks you to reboot into the newly installed Operating System.
-:Once you have a console prompt, the steps are pretty straight forward:
+:Once you have logged in:, the steps are pretty straight forward:
 :Connect the wifi unit to the adapter that will be used as the local area network (LAN), and make sure everything is under power with link lights.
 *Issue the following commands:
              ping yahoo.com (this verifies that the server is properly connected to internet after the reboot)
-            yum -y update
+             yum -y install git ansible icecat
-             yum -y install git ansible
              cd /opt
              mkdir -p schoolserver
              cd schoolserver
-             git clone https://github.com/XSCE/xsce --branch stable --depth 1
+             git clone https://github.com/XSCE/xsce
              cd xsce
              ./install-console
@@ Line 303: / Line 304: @@
              ip addr (verify that the external adapter and the LAN adapter or br0 have ip addresses)
-*At this point you can connect to the server via the wifi at http://schoolserver/admin. Or with firefox from MATE desktop
+*At this point you can connect to the server via the wifi at http://schoolserver/admin. Or with IceCat from xfce desktop
-:Decide which services need to be enabled, check the checkboxes, save the configuration, and click "install configured server'.
+:Decide which services need to be enabled, check the checkboxes, Save Configuration, and click "Install configured Options'.
+::Wait for "SUCCEED" in Utilities/Display job status.
-:Next download any content needed for rachel, kiwix, and/or other instructional materials.
+:Next Install Content needed for rachel, kiwix, and/or other instructional materials.
+:: Note: '''Get Rachel''' only appears On Install Content if you checked the rachel check box in Configure services
 :: There are instruction for how and where to place the downloaded materials in README files in each of the roles folders.