Sugar Labs

Sugar on a Stick/Beta

< Sugar on a Stick
Revision as of 01:03, 1 November 2009 by FGrose (talk | contribs)

Soas04 Beta

Download

SoaS Installation on USB/SD

(Don't forget to chmod +x tools_livecd-iso-to-disk.sh after you download the script.)
  • The .iso file may be burnt to a CD-ROM and booted on your PC (or mounted in a virtual machine to boot it):

Note:

  • See this announcement for more information.
  • To install the .iso disc image, execute the shell script as the root user in one command with arguments as follows:
sudo ./tools_livecd-iso-to-disk.sh --overlay-size-mb 400 --delete-home --extra-kernel-args selinux=0 ./soas04.iso /dev/sd*1
  • (*) be sure of your USB/SD storage device name (such as sda, sdb, etc.) and partition (such as 1, 2, etc.), yielding, for example, /dev/sdb1. Use the mount command or the partition manager to confirm it before executing the script.
  • --format --reset-mbr are optional arguments for the shell script, but may be excluded to preserve the existing disc format and data. See olpc:How to Damage a FLASH Storage Device for a discussion of why you might want to try to keep your factory format on a flash storage device.
  • If you do use the format and reset master boot record arguments, you'll want to specify the target device name and not a partition, that is /dev/sd* with no partition number, instead of /dev/sd*1 as in the example above used to specify an existing partition. As noted above, confirm your target disc device name—in this case, it is VERY DANGEROUS to your other discs if this is entered wrong, as the whole disc will be reformatted and a new master boot record written causing all previously written data on that disc to be lost.

zyx-liveinstaller

  • zyx-liveinstaller is a method for installing SoaS from either a USB device or Live CD media to a system or external disk. It is known to work best with the most recent snapshot build - soas04.iso.[1]
  • To use, start the root terminal activity, type 'zyx-liveinstaller', then press enter.
  • start the partitioner,
recommend 4-GB USB/SD device formatted as follows:
200 /boot ext2
3000 / ext3
(no swap needed)

Exit the partitioner by hitting the X in the top corner of window. Then read and follow the simple wizard, choosing destination volumes/partitions for boot, root, and swap. root must be at least 2GB(not currently checked for by the installer). boot may be the same as root, and swap is optional.

  • This is a *destructive* install, meaning that the contents of the disks or partitions you choose will be overwritten entirely.
  • During installation, you are free to use other activities.
  • After installation completes, you may remove the LiveUSB or LiveCD, and continue using the newly installed system - without rebooting!!!. This means that anything done with the system before, during, or after installation persists into the installed system.

use dd command

on this hybrid image to make a bootable USB/SD (NOT RECOMMENDED) Makes bootable USB from SoaS .iso

  • If you use dd command to write a USB or SD image, there will be no persistence. The SCRIPT method detailed above should be used.

In Root Terminal: 

dd if=soas04.iso of=/dev/sd(?) bs=4M
  • Be sure your USB/SD is /dev/sd? check with partition manager to be sure.

CAUTION: ** You can destroy you Hard Disk if you enter it wrong! **

Retrieved from "https://wiki.sugarlabs.org/index.php?title=Sugar_on_a_Stick/Beta&oldid=39766"