Sysadmin/Migrate virtual machine

< Sysadmin
Revision as of 01:14, 23 January 2011 by Bernie (talk | contribs)

How to migrate a file-based guest to LVM (online method)

  • First, create the logical volume and attach it to the running VM:
treehouse# scp VMNAME:/boot/{vmlinuz,initrd}-2.6.31-22-server /srv/vm/kernel/ubuntu/
treehouse# virsh vol-create-as treehouse VMNAME-root 10G
treehouse# virsh attach-disk VMNAME /dev/treehouse/VMNAME-root vdc
treehouse# virsh console VMNAME
  • From within the VM, format the new volume and move things over
VMNAME# mkfs.ext4 -L VMNAME-root -O flex_bg,extent,uninit_bg,sparse_super /dev/vdc
VMNAME# tune2fs -c -1 -i 0 /dev/vdc
VMNAME# mount /dev/vdc /mnt
VMNAME# rsync -PHAXphax --numeric-ids --delete / /mnt/
VMNAME# vim /mnt/etc/fstab
VMNAME# umount /mnt
VMNAME# ^D
  • Then edit the VM configuration to make it boot without GRUB, using externally provided kernel and initrd:
treehouse# virsh edit VMNAME
 <os>
   <type arch='x86_64' machine='pc-0.11'>hvm</type>
   <kernel>/srv/vm/kernel/ubuntu/vmlinuz-2.6.31-22-server</kernel>
   <initrd>/srv/vm/kernel/ubuntu/initrd.img-2.6.31-22-server</initrd>
   <cmdline>console=tty0 console=ttyS0,115200n8 vga=normal root=LABEL=VMNAME-root ro</cmdline>
   <boot dev='hd'/>
 </os>
 ...
 <devices>
   ...
   <disk type='block' device='disk'>
     <source dev='/dev/treehouse/VMNAME-root'/>
     <target dev='vda' bus='virtio'/>
   </disk>
   ...
 </devices>
  • Reboot
#treehouse virsh destroy VMNAME
#treehouse virsh start VMNAME --console

How to migrate a file-based guest to LVM (offline method)

  • Determine the offset of the root partition within the raw disk image:
fdisk -l -u vm.img
  • Convert the start offset to bytes:
mount -o loop,offset=$((63 * 512)) vm.img /mnt/
  • Then, create an LV and copy over everything as in the online case
virsh vol-create-as treehouse VMNAME-root 10G
virsh attach-disk rt /dev/treehouse/VMNAME-root vdc
mkfs.ext4 -L rt-root -O flex_bg,extent,uninit_bg,sparse_super /dev/treehouse/VMNAME-root
tune2fs -c -1 -i 0 /dev/treehouse/VMNAME-root
mkdir /mnt2/VMNAME-root
mount  /dev/treehouse/VMNAME-root  /mnt2/VMNAME-root/
rsync -HAXphax --numeric-ids --delete /mnt/VMNAME-root/ /mnt2/VMNAME-root/

How to migrate an LVM-based guest to another host

(untested procedure)

First, shutdown the VM, then do:

mount /dev/treehouse/beamrider-root /mnt
ssh housetree mount /dev/housetree/beamrider-root /mnt
rsync -PHAXphax --delete --numeric-ids /mnt/ housetree:/mnt/
rsync -a /etc/libvirt/qemu/beamrider.xml housetree:/etc/libvirt/qemu/
umount /mnt
ssh housetree umount /mnt

Then log to $OTHERHOST and create the domain in virsh.

Downtime can be reduced to just a few minutes by doing a first rsync iteration from within the VM while it's still running.

Make sure you pass all the fancy switches to rsync or you'll loose information on the copy.


Alternative to convert file based VM to block based LVM (Assumes server is treehouse)

Stop the VM

sudo virsh stop name_of_vm

Convert the qcow2 file to a raw file

sudo qemu-img convert "name_of_vm".qcow2 -O raw "name_of_vm".raw

Create the LVM - Make sure the "size_of_vm" is equal or greater than the size of your raw image

sudo virsh vol-create-as treehouse "name_of_vm" "size_of_vm"

Copy the raw image to the LVM

sudo dd if="name_of_vm".raw of=/dev/treehouse/"name_of_vm" bs=1M

Edit the VM configuration

sudo virsh edit "name_of_vm"
   <devices>
     ...
     <disk type='block' device='disk'>      <----- change disk type to block
       <source dev='/dev/treehouse/"name_of_vm"'/>      <------ note that the source is now dev= and not file=
       <target dev='vda' bus='virtio'/>
     </disk>
     ...
   </devices>

Now start your VM and your all set