Sugar on a Stick/Windows
< Sugar on a Stick
Revision as of 17:43, 20 January 2012 by HoboPrimate (talk | contribs) (no reason to "Choose Base Memory Size: 256 MB to match an XO-1, 512 or 1024 MB to match an XO-1.5" in this step)
Introduction
This page is designed to help you to put your Sugar on a Stick image on a thumbdrive using Microsoft Windows. If you have questions, trouble or feedback, please let us know on the SoaS talk page. If you can improve these instructions, please edit the page and do so!
with Microsoft Windows
There are three ways to do this:
- 1. Use Fedora Live USB Creator
(This installation method is not recommended if you intend to permanently store files with Sugar on a Stick.See why.)
- Download the Live USB Creator from Fedora.
- Insert a USB flash drive (or SD Card) with 2 GB or more of free space into your computer.
- Launch Live USB Creator.
- Select the 'Browse' button to 'Use existing Live CD' and find the downloaded .iso file image on your system.
- Adjust the Persistent Storage slider. This enables you to save changes to the system and additional Sugar Activities onto the device.
- Select your flash drive as the target, and click the Create Live USB button.
- Wait for the process to finish, then close the Live USB Creator program.
- Stop your flash drive with the Safely Remove Hardware and Eject Media notification area icon dialog, and eject it.
- See a video of an earlier version of this process here.
- 2. Burn a CD-ROM disc, boot from it, then run the script, livecd-iso-to-disk
- Use Windows 7 built-in Disk Image Burner or a free utility, like ImgBurn, to write the downloaded Sugar on a Stick .iso file onto a blank CD.
- Insert a USB flash drive (or SD Card) with 2 GB or more of free space into your computer.
- Boot your computer with the CD-ROM disc. You probably need to press F1, F10, F12, Esc, or a similar key as the computer starts up in order to set the boot source for your computer to the CD-ROM device.
- A successful boot will take you into Sugar on a Stick. You can From there, open the Terminal Activity, , from the Home view.
- Click the 'Become root' icon, , to gain administrative permissions in the Terminal session.
- Change the working directory to
/LiveOS/
cd /LiveOS/
- Be certain of your USB/SD scsi drive node name (such as sda, sdb, etc.) and partition (such as 1, 2, etc.), yielding, for example,
/dev/sdb1
.- Use the
df -Th
command to confirm your devices before executing the following script.
- Use the
- execute the Linux command line:
./livecd-iso-to-disk --reset-mbr --overlay-size-mb 300 --home-size-mb 175 --delete-home --unencrypted-home /dev/sr0 /dev/sd?1
- Shutdown the physical machine.
- Reboot from the newly-installed Live USB with SoaS.
- 3. Launch a virtual machine, then run the script, livecd-iso-to-disk
- Download and install VirtualBox (for example; you could do something similar with another vm).
- Create a new virtual machine, choosing a name such as 'SoaS'.
- Choose Linux for the Operating System and Version Fedora (64 bit) if available, or Fedora, on systems lacking 64-bit functionality.
- Attach the SoaS.iso file as a CD in the Storage Section
- Insert a USB storage device into your physical computer and enable the VirtualBox USB controller. Then add a filter to recognize the inserted device in the USB section of the VirtualBox machine setup.
- Start the new virtual machine.
- Verify that the USB device is recognized in the running virtual machine.
- Your device appears in the hover box for the USB stick icon in the virtual machine bottom frame.
df -Th
reveals your device mounted mounted on a device node, for example, /dev/sda1, on a filesystem volume mount point, such as /media/<USBdeviceManufacturer>
You should see something like the following:
[root@localhost LiveOS]# df -Th Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/live-rw ext4 4.0G 1.5G 2.5G 37% / tmpfs tmpfs 250M 236K 249M 1% /dev/shm /dev/sr0 iso9660 477M 477M 0 100% /mnt/live varcacheyum tmpfs 250M 0 250M 0% /var/cache/yum /tmp tmpfs 250M 24K 249M 1% /tmp vartmp tmpfs 250M 0 250M 0% /var/tmp /dev/sda1 vfat 15G 2.4G 13G 17% /media/TOSHIBA
- Continue from step #4 in the Burn a CD-ROM disc section above.
- Shutdown the virtual machine.
- Reboot your physical computer from the newly-installed Live USB with SoaS.