Changes

* Note that selinux must be disabled in the startup (selinux=0) or Sugar will not load.

* Note that selinux must be disabled in the startup (selinux=0) or Sugar will not load.

*: This precludes using a dd command to write a USB or SD image. The SCRIPT MUST BE USED.

*: This precludes using a dd command to write a USB or SD image. The SCRIPT MUST BE USED.

  <pre>sudo ./tools_livecd-iso-to-disk.sh --overlay-size-mb 400 --delete-home

  --extra-kernel-args selinux=0 ./SoaS3-200909271154.iso /dev/sd*1</pre>

:<pre>sudo ./tools_livecd-iso-to-disk.sh --overlay-size-mb 400 --delete-home --extra-kernel-args selinux=0 ./SoaS3-200909271154.iso /dev/sd*1</pre>

** (*) ''be sure of your USB/SD device name (such as sda, sdb, etc.) and partition (such as 1, 2, etc.), yielding, for example,'' <code>/dev/sdb1</code>. ''Use the mount command or the partition manager to confirm it before executing the script.''

:* (*) ''be sure of your USB/SD '''s'''torage '''d'''evice name (such as sda, sdb, etc.) and partition (such as 1, 2, etc.), yielding, for example,'' <code>/dev/sdb1</code>. ''Use the mount command or the partition manager to confirm it before executing the script.''

** The <code>--format --reset-mbr</code> arguments for the shell script were in the example script, but may be excluded to preserve the existing disc format and data.  See [[olpc:How to Damage a FLASH Storage Device]] for a discussion of why you might want to try to keep your factory format on a flash storage device.  

:* The <code>--format --reset-mbr</code> arguments for the shell script were in the example script, but may be excluded to preserve the existing disc format and data.  See [[olpc:How to Damage a FLASH Storage Device]] for a discussion of why you might want to try to keep your factory format on a flash storage device.  

** If you do use the format and reset master boot record arguments, you'll want to specify the target device name and not a partition, that is <code>/dev/sd*</code> with no partition number, instead of <code>/dev/sd*1</code> as in the example above used to specify an existing partition. ''As noted above, confirm your target disc device name&mdash;in this case, it is VERY DANGEROUS to your other discs if this is entered wrong, as the whole disc will be reformatted and a new master boot record written causing all previously written data on that disc to be lost.''

:* If you do use the format and reset master boot record arguments, you'll want to specify the target device name and not a partition, that is <code>/dev/sd*</code> with no partition number, instead of <code>/dev/sd*1</code> as in the example above used to specify an existing partition. ''As noted above, confirm your target disc device name&mdash;in this case, it is VERY DANGEROUS to your other discs if this is entered wrong, as the whole disc will be reformatted and a new master boot record written causing all previously written data on that disc to be lost.''

== Put [[Sugar on a Stick/Installation/OLPC | SoaS on an OLPC XO-1]] ==

== Put [[Sugar on a Stick/Installation/OLPC | SoaS on an OLPC XO-1]] ==