10,579
edits
Changes
→Using
[[image:Measure-screen.JPG|600px|center]]
[[image:Measure-screen.JPG|600px|center]]
1. Select secondary toolbar - allows the Activity's Journal entry to be renamed
2. Select secondary toolbar - measurement settings
3. Select secondary toolbar - tuning settings
4. The selected input type - Sound (AC voltage), resistance or DC voltage
5. The time scale
6. Freeze the display
7. Capture sample now - saves an image of the wave in the Journal
8. Stop - exits the Activity
9. Mute - mute/unmute channel
10. Invert - invert the display
11. Use these sliders to control the sensitivity
12. The settings that are selected
The sensor toolbar - measurement settings
The sensor toolbar - measurement settings
13. Sound - use this setting with the internal microphone, external microphone and external AC signals
14. Resistance sensor - use with external resistive type transducers
15. Voltage sensor - use with external sensors which generate a voltage
16. Time base/frequency - graphs the signal vs. time or graphs amplitude vs. frequency
17. Sample interval - a text file 'Measure Log' is saved to the journal, it contains one sample per interval
18. Starts/stops saving a text file 'Measure Log' with measured values as readable text
19. Trigger - synchronise the sample period to the waveform so that the sample will start on a rising edge or falling edge
[[File:Measure3rdtoolbar.JPG|600px|center]]
[[File:Measure3rdtoolbar.JPG|600px|center]]
20. Instrument - select instrument to tune
21. Frequency entry - enter a frequency to mark
22. Show frequency.
=='''Applying'''==
=='''Applying'''==