Line 1: |
Line 1: |
− | Sugar on a Raspberry pi is functional, robust and stable, testable by children (in progress) but incomplete.
| |
| | | |
− | == Test report Sugar 0.88 == | + | *<- Back to [[Sugar_Creation_Kit/sck/Advanced_Topics#Raspberry_Pi_.2F_RPi|ARM RPi]] |
− | :http://www.raspberrypi.org/downloads | + | ==[[File:Fedora.jpg|40px|link=http://fedoraproject.org/]] Test report rpfr-f18-final.img== |
− | :http://downloads.raspberrypi.org/images/debian/6/debian6-19-04-2012/debian6-19-04-2012.zip | + | ::Updated Mar 17 2013 |
− | :UnZip and write to SDXC Card with dd | + | |
| + | *Download: |
| + | :NEW: http://scotland.proximity.on.ca/raspberrypi/raspberrypi-fedora-remix/18/images/rpfr-f18-final.zip |
| + | : http://scotland.proximity.on.ca/raspberrypi/raspberrypi-fedora-remix/18/images/rpfr-f18-rc1.zip |
| + | : Older version that also works |
| + | ===Write to SD card=== |
| + | |
| + | *http://elinux.org/RPi_Easy_SD_Card_Setup |
| + | :Detailed options for writing SD card. |
| + | *'''Unzip rpfr-f18-rc1.zip |
| + | ====dd write SD==== |
| + | *Using an SD adapter in a USB socket: |
| + | # dd if=rpfr-f18-rc1.img of=/dev/sd(x) or /dev/mmcblk(x) |
| + | 6144000+0 records in |
| + | 6144000+0 records out |
| + | 3145728000 bytes (3.1 GB) copied, 717.468 s, 4.4 MB/s |
| + | *'''/dev/sd(x) or /dev/mmcblk(x)''' |
| + | :Use command "mount" in terminal to get correct device name eg: /dev/sdb /dev/sdc /dev/sdd etc. |
| + | *'''If you are using a SD slot, you may see /dev/mmcblk(x) |
| + | # dd if=rpfr-f18-final.img of=/dev/mmcblk0 |
| + | 6144000+0 records in |
| + | 6144000+0 records out |
| + | 3145728000 bytes (3.1 GB) copied, 1001.65 s, 3.1 MB/s |
| + | |
| + | *'''CAUTION''' the device name has to be correct or you can damage your computers drives with no warning. |
| + | |
| + | ===Insert SD Card=== |
| + | *Insert SD in RPi and plug in the power supply mini usb |
| + | :Unplug this mini usb to shutdown RPi |
| + | *Connections |
| + | [[File:RPI-connections.JPG|700px]] |
| + | *Picture |
| + | [[File:RPi-B-512.JPG|700px]] |
| + | ===Boot SD Card=== |
| + | *Note this takes several minutes to do reach the first boot. |
| + | : Be Patient |
| + | *Firstboot |
| + | : TimeZone and Language |
| + | : user name and password |
| + | : root password |
| + | : select type of HDMI output |
| + | : resizes the SD / |
| + | : swap settings - increase to 1024 |
| + | *Log in |
| + | *Recommended: turn off screensaver |
| + | :Applications/settings/screensaver |
| + | ::Mode "Disable Screensaver" |
| + | ::File-Quit |
| + | |
| + | ===Install sugar-desktop=== |
| + | yum groupinstall sugar-desktop |
| + | :::633kb | 133MB 138 files |
| + | yum install sugar-emulator |
| + | |
| + | *To start '''SUGAR''' : Applications Menu: Education/Sugar |
| + | *sugar emulator running on RPi |
| + | [[File:Rpfr-fi18-rc1.png|500px]] |
| + | *rpfr-f18-rc1-a-sd.img file created with '''disk utility''' from working 8 GB SD card |
| + | :and then restored with '''disk utility''' to a 16 GB SD Card and booted on RPi 512 "b" |
| + | [[File:Sugar-rpfr-f18rc1.png|500px]] |
| + | *This screenshot added 03/18/2013 |
| + | |
| + | ===Sugar=== |
| + | *Build: Fedora remix release 18 (Raspberrypi Fedora Remix) |
| + | *Sugar: 0.98.2 |
| + | ====Create and read wiki-page.pdf files in LDXE and Sugar==== |
| + | *You can Create wiki-page.pdf files in LDXE using the RPi to load on a USB for access in sugar-read : |
| + | :See: [[Tutorials/Tutorials.iso]] |
| + | :Browser in LDXE can print Wiki pages to a .pdf file |
| + | yum install evince |
| + | :evince is added so .pdf files can be read in LDXE |
| + | ::Read in sugar already can open the .pdf files on a 2nd USB |
| + | *Evince reading Tutorials USB on LDXE Desktop |
| + | [[File:RPi-evince.JPG|500px]] |
| + | |
| + | ===[[Tutorials/Introduction_to_the_Sugar_Interface|Introduction to the sugar Interface]]=== |
| + | * A tutorial to introduce the sugar-desktop to new users |
| + | ===[[Testing/Reports/ARM_RPi/Duplicating_a_RPi_SD_Card|Duplicating a RPi SD Card]]=== |
| + | *Duplicate a working SD Card |
| + | |
| + | ===Notes=== |
| + | *To run sugar: log-out/log-in then choose sugar in switcher after you enter your user name. |
| + | *Information; http://zenit.senecac.on.ca/wiki/index.php/Raspberry_Pi_Fedora_Remix |
| + | *Sugar IRC-10 in RPi "B" 512 on rpfr-f18-rc1 (arm) and rpfr-17-xfce-r2 use IP6 ...all my other devices use IP4 |
| + | ... |
| + | In general newer versions of Fedora will try and autodiscover IPv6 networks. |
| + | If it finds one with a non-local (not fe80::) IP address it will get on it, and used the IPv6 routers spotted if present |
| + | Given a DNS name with both IPv4 & v6 addresses set, it's mostly up to the application to see if asks the OS to do v4, v6, |
| + | or just generically whichever the OS thinks makes the most sense |
| + | |
| + | *How to write the SD in a MAC:http://alltheware.wordpress.com/2012/12/11/easiest-way-sd-card-setup/ |
| + | :'''Warning a fee is charged for download''' |
| + | |
| + | ==[[File:Fedora.jpg|40px|link=http://fedoraproject.org/]] Test report rpfr-17-xfce-r2.img== |
| + | ::Feb 12 2013 |
| + | *http://zenit.senecac.on.ca/wiki/index.php/Raspberry_Pi_Fedora_Remix |
| + | *Download:http://scotland.proximity.on.ca/raspberrypi/f17-releases/v5/latest/rpfr-17-xfce-r2.zip |
| + | *Information: http://zenit.senecac.on.ca/wiki/index.php/Raspberry_Pi_Fedora_Remix |
| + | ===Write to SD card=== |
| + | *Unzip file |
| + | # dd if=rpfr-17-xfce-r2.img of=/dev/sdc |
| + | 6144000+0 records in |
| + | 6144000+0 records out |
| + | 3145728000 bytes (3.1 GB) copied, 1056.07 s, 3.0 MB/s |
| + | |
| + | ===Boot DC Card=== |
| + | *Firstboot |
| + | : select type of HDMI output |
| + | : resizes the SD / and |
| + | : swap settings |
| + | ===Install sugar-desktop=== |
| + | yum groupinstall sugar-desktop |
| + | *38 packages (+93 Dependent packages) |
| + | :Download size 120 M |
| + | :Installed size 282 M |
| + | *Log out/Log In to XFCE or Sugar |
| + | |
| + | ===Sugar=== |
| + | :Build: Fedora remix release 17 (Raspberrypi Fedora Remix) |
| + | :Sugar: 0.96.2 |
| + | ====Activities==== |
| + | *DO NOT DO SOFTWARE UPDATE - Some activities will "Failed to start" if updated from My Settings/Software update |
| | | |
− | *Boot SDXC Card | + | ==[[File:Fedora.jpg|40px|link=http://fedoraproject.org/]] Test report raspberrypi-fedora-remix-17-test-004.img== |
− | login pi | + | *'''RECOMMENDED''' |
− | password raspberry | + | *http://scotland.proximity.on.ca/raspberrypi/test-releases/rpfr17/ |
− | startx | + | Changes in this release: |
− | *LXTerminal:
| + | |
− | :Root password is not known but "sudo su" goes to root terminal
| + | - Image resize/swap space creation is now more reliable (note, however, |
− | sudo su | + | that it will take several minutes after the firstboot setup before the |
− | apt-get install sucrose-0.88 | + | resize/swap takes effect - the system may be used during this time). I |
− | apt-get update | + | think we've probably nailed the last of the significant |
− | apt-get install sugar-emulator-0.88 | + | firstboot/resize/swap issues. |
− | *Start Education/Sugar from menu
| + | |
− | :Activities loaded:
| + | - The image is now 1.852G in size and will fit a 2GB card (4GB or larger |
− | ::Browse
| + | card is recommended to allow plenty of space for data/extra |
− | ::Read
| + | software/swap). The download is 665MB. |
− | *Jabber does not work
| + | |
− | *Download IRC-10.xo from ASLO (Browse)
| + | Next week we'll start performance tests with armv6 rebuilds (sfp & hfp) |
− | :IRC-10.xo works
| + | and continue work on image size reduction and boot cutdown. |
− | *NOTE Get Sugar Journal full messages after several uses.
| + | |
− | *Tried loading synaptic but it freezes loading catalogues. | + | Chris Tyler 08/03/2012 |
− | :apt-get remove synaptic
| + | |
| + | ===Write to SD Card=== |
| + | *Outside of RPi |
| + | zcat raspberrypi-fedora-remix-17-test-004.img.gz >/dev/mmcblk0 |
| | | |
− | == Test report Sugar 0.94 == | + | === Boot SD Card=== |
| + | *Insert the SD Card in the RPi |
| + | *Connect all cables |
| + | *Plug in power cord |
| + | :This starts Boot |
| + | *Firstboot |
| + | '''Use Network time''' |
| + | there is no realtime clock on RPi (errors will occur if time is not set correctly) |
| + | root password |
| + | User and Password |
| + | [x]user is part of administrator group |
| + | [x]resize with swap 1024 MB - (move slider) |
| + | [x] Graphical Boot |
| + | *Use default desktop config (XFCE) |
| + | *Change memory split: |
| + | : between the ARM CPU and the GPU, |
| + | :"The 004 test image defaults to 224/32 MB memory split - it is not necessary to change this split to use yum. |
| + | : The 240/16 firmware is now included in the image. |
| | | |
− | Product of the command
| + | *Resize of File System and Creation of swap |
− | sweets sdk/sugar:emulator
| + | "The SD card will be resized during the second boot. |
− | Raspberry pi, running OS from http://www.raspbian.org/ (pisces image) on a SanDisk 4 GB, class 4, SDHC card.
| + | "this will appear as the file /swap0 and will appear in both /etc/fstab and swapon -s " |
| + | ctyler on #seneca |
| + | *Test SDXC Card |
| + | '''A 64 GB SDXC card resizes to:''' |
| + | fat 16 /boot 51.00 MB boot, lba |
| + | ext4 rootfs 59.43 GiB |
| | | |
− | Sweets, following these instructions [[Platform Team/Guide/Sugar via Sweets]]
| + | ===Update firmware=== |
| + | *Terminal: |
| + | su |
| + | (password) |
| + | #yum update |
| + | 38 Pkgs/29M |
| + | :raspberry firmware and kernel included |
| + | *Change memory split: |
| + | :Required on this image to avoid out of memory condition when using yum to install |
| + | :"This image uses a 224/32 MB memory split between the ARM CPU and the GPU, |
| + | :instead of the more useful240M/16M. To change this, run this command:" |
| | | |
− | From my computer
| + | In Terminal: |
− | ::Build: Debian GNU/Linux testing/unstable
| + | sudo su |
− | ::Sugar: 0.94.1
| + | Password |
| + | cp /boot/arm240_start.elf /boot/start.elf |
| + | *'''reboot''' |
| | | |
− | All Function keys, F1 to 6, work fine
| + | ===Install Sugar 0.96.2=== |
− | All Views and avatars seen correctly, without error.
| + | #yum install sugar* 77M 220M installed |
− | Software Updates fully functional. These tested Activities fully functional.
| |
− | Calculate.activity v.40 -
| |
− | Chat.activity v.77 -
| |
− | HorseGame.activity v.4 -
| |
− | IRC.activity v.10 -
| |
− | Log v.29 -
| |
− | Labyrinth.activity v.12 -
| |
− | Maze.activity v.21 -
| |
− | Memorize.activity v.4 -
| |
− | Moon.activity v.14 -
| |
− | Pippy.activity v.49 -
| |
− | SprayPlay.activity v.2 -
| |
− | SugarCommander.activity v.8 -
| |
− | Terminal.activity v.40 -
| |
− | Turtle Art v.149 -
| |
− | TurtleConfusion.activity v.10.
| |
| | | |
− | ==== GUI Activity install ==== | + | ===Start Sugar=== |
− | Without a working browser, we can use the host browser, midori, and pcmanfm unzip tool.
| + | *Application Menu/education/sugar |
| + | :sugar-emulator starts |
| + | *Note the Raspberry Pi board on the right bottom of screenshot. |
| + | * The 1 AMP 5 Volt USB powersupply is marginal |
| + | :To insure that RPi gets adequate power, use a powered 4 port USB Hub[1] for the USB Keyboard and USB Mouse |
| + | ::[1] (Belkin) |
| | | |
− | Select a new Activity from ASLO, http://activities.sugarlabs.org//en-US/sugar/ . (Packages selected to run in Sugar 0.94.1 can be identified in ASLO, using "Advanced Search"). Using Midori, download chosen Activities to, say, ~/downloads. Open ~/downloads with pcmanfm, select the NewActivity.xo, right click, chose extract to, enter ~/Activities, press Save. The Activity will unzip ready to use. You can check in ~/Activities that you have NewActivity.activity
| + | ===About my Computer=== |
| + | Build: Fedora remix release 17 (Raspberrypi Fedora Remix) |
| + | Sugar: 0.96.2 |
| + | ===Wireless Networking=== |
| + | :Verified Peripherals: http://elinux.org/RPi_VerifiedPeripherals |
| + | *RPi USB Port 1: Powered 4 port USB Hub to run USB Mouse and USB keyboard. |
| + | *RPi USB Port 2 :'''D-link DWL-122 USB wireless adapter''' on a 12" USB extension cable. |
| + | :Connects to a WEP wireless AP |
| + | :Shows AD-HOC and wirelss AP's in sugar (f1) Network Neighbourhood. |
| + | [[File:RPi-Wireless.JPG|800px]] |
| | | |
− | ==== Fixed Items ==== | + | ===Disable Screen Saver=== |
− | Earlier in the process, to fix:
| + | *The screen still blanks after a while even with the screen saver disabled. |
| + | :to Fix: |
| + | Terminal: |
| + | xset s |
| + | xset -dpms |
| + | ===Shutdown=== |
| + | *only log off is offered in this test software |
| + | :To Shutdown the RPi: |
| + | Terminal: |
| + | su |
| + | (password) |
| + | shutdown -h now |
| + | *Unplug the mini power Connector from RPi board (on the cable coming from the 1,0Amp 5 Volt power supply) |
| + | *Reboot occurs on re-plugging in this connector |
| | | |
− | ImportError: No module named vte | + | ==[[File:Mate.png|link=http://mate-desktop.org/]]Test report Raspbian-PiscesMATE.img== |
− | ImportError: No module named gst | + | :07/26/2011 |
− | ImportError: No module named pygame | + | *MATE is a fork of GNOME 2 |
| + | :http://mate-desktop.org |
| + | ===Download=== |
| + | :http://www.raspbian.org/PiscesMATEImages |
| + | :http://archive.raspbian.org/images/rpi_pisces_mate_r1.zip |
| + | ===Write to SDXC Card=== |
| + | :Unzip |
| + | # dd if=rpi_pisces_mate_r1.img of=/dev/mmcblk0 |
| + | ===Boot SDXC Card=== |
| + | *Cards tested: |
| + | :SanDisk Ultra SDXC 64 GB 30 MB/s |
| + | :SanDisk SDHC 8 GB 15 MB/s |
| + | *Do resize of SD Card here in another computer with gparted - (See section below) |
| + | :Use SD card to USB adapter if needed |
| + | *Boot RPi with the resized card. |
| + | The following two user accounts are created on this image: |
| + | Username Password |
| + | root raspbian |
| + | raspbian raspbian |
| + | *Login to raspbian |
| + | :Startx |
| + | :boots to '''MATE Desktop Environment 1.2.0''' |
| + | apt-get update |
| + | dpkg-reconfigure tzdata - Be sure it is correct |
| + | apt-get upgrade - 226 files |
| + | apt-get synaptic |
| | | |
− | sudo apt-get install python-vte python-gst0.10 python-pygame
| + | ===Test#1 Install Sugar-0.96 in Wheezy=== |
| + | *synaptic: |
| + | :search for sugar |
| + | :Select: |
| + | ::sugar-session-0.96 - 315 files |
| | | |
− | ==== Still to Fix ==== | + | ===About my Computer=== |
| + | *Caution Keyring password is asked at start |
| + | :This password required to be used to start Jabber.sugarlabs.org |
| + | Build Debian GNU/Linux testing/unstable |
| + | Sugar 0.96.1 |
| + | ===Notes=== |
| + | *1 Amp Power Supply is marginal with a Dell USB Keyboard and Dell USB Wheel-Mouse connected to the 2 supplied connectors on RPi |
| + | *'''Use a 4-Port Powered Desktop Hub to connect them instead''' (Belkin 4-port Powered Hub F4U20-8830-06939 Rev A00) worked |
| + | ====Install More Activities in Sugar==== |
| + | *Download the Activities you want to a USB from http://activities.sugarlabs.org/ |
| + | *USB's do not Automount on insertion on the RPi |
| + | =====Mount/Unmount USB===== |
| + | *'''Mount USB''' |
| + | :Terminal: |
| + | sudo su |
| + | (password) |
| + | root@pisces:/home/raspbian# mount -t vfat /dev/sda1 /home/raspbian/USB |
| + | *USB appears on Desktop and in Sugar Frame when clicking on Journal |
| + | *[[Tutorials/Copy_with_drag_%26_drop|Drag Drop install xxxx.xo files]] from USB to the Sugar Journal |
| + | *'''Unmount USB''' |
| + | root@pisces:/home/raspbian# unmount /dev/sda1 |
| | | |
− | '''As a known issue''' (for Debian), suggested dependencies, i.e., -S sweets command argument, don't work for now.
| + | ===Activities=== |
− | sweets -S sdk/sugar:emulator | + | Pippy 46 |
− | responds
| + | Turtle Art 98 |
− | -- Cannot find requireed implementations for
| |
− | http://sweets.sugarlabs.org/sdk/xulrunner, http://sweets.sugarlabs.org/base/abiword, http://sweets.sugarlabs.org/sdk/evince-python
| |
− | -- Use status command with -d argument to show problem dependencies
| |
− | -- Use -D argument for debug info, -DD for full debuging output and tracebacks | |
| | | |
| + | ===Test #2 Install sugar 0.88.1=== |
| + | *continue but use ''apt-get dist-upgrade'' |
| + | apt-get update |
| + | dpkg-reconfigure tzdata - Be sure it is correct |
| + | apt-get dist-upgrade - Very Large update |
| | | |
− | '''Surf.activity v.115 Reports, Failed to start.'''
| + | ===Install sugar-emulator-0.88=== |
| + | apt-get install sugar-emulator-0.88 - Pulls in large set of gnome files |
| + | ====About my Computer==== |
| + | Build: Debian GNU/Linux testing/unstable |
| + | Sugar: 0.88.1 |
| + | ====Activities==== |
| + | Pippy 45 |
| + | Turtle Art 98 |
| + | Log 24 |
| + | Terminal 28 |
| + | Write 70 |
| + | Calculate 40 |
| + | Chat 76 |
| + | Note: extra Activities added when installed |
| + | apt-get install sugar-emulator-0.86 |
| + | then |
| + | apt-get install sugar-emulator-0.88 |
| + | *Installed activities from 0.86 remained |
| | | |
− | ImportError: No module named webkit | + | == [[File:Debian.jpg|40px|link=https://wiki.debian.org/Sugar]] Test Report: rpi_pisces_r3.zip == |
| + | :D/L: http://www.raspbian.org/PiscesImages |
| + | *r3 Image |
| + | "Mike Thompson has produced a publicly available SD image of Raspbian that is bootable on Raspberry Pi hardware. |
| + | This is called the "pisces" image as that is what Mike's Raspberry Pi system is named on his LAN. |
| + | This image is a little newer and includes a more complete installation of Raspbian and LXDE than the more minimal Hexxeh image. |
| + | This image was created using the Debian installer so it reflects a minimal Debian installation with the LXDE packages added for a desktop." |
| + | *Once booted, log into one of the two existing accounts: |
| + | Username Password |
| + | root raspbian |
| + | raspbian raspbian |
| + | *This version has a fake hardware clock as the RPi has no clock |
| + | ===Install sugar 0.96=== |
| + | apt-get install sugar-session-0.96 |
| + | ====About my Computer==== |
| + | Build Debian GNU/Linux testing/unstable |
| + | Sugar 0.96.1 |
| | | |
− | To fix tried:
| + | :Starts at sugar: name - color selection screens |
− | sudo apt-get install libwebkitgtk-3.0-dev
| + | :Keyring password is set |
− | which added
| + | :Jabber works. |
− | gir1.2-javascriptcoregtk-3.0 gir1.2-soup-2.4 gir1.2-webkit-3.0 libgtk-3-dev libjavascriptcoregtk-3.0-dev libsoup2.4-dev libwebkitgtk-3.0-dev libxml2-dev | + | ====Activities==== |
− | But error persists:
| + | Pippy 46 |
− | ImportError: No module named webkit
| + | Turtle Art 98 |
| + | *Still testing--[[User:Satellit|Satellit]] 17:22, 17 August 2012 (EDT) |
| | | |
− | '''Browse v.129 Reports, Failed to start.''' | + | == [[File:Debian.jpg|40px|link=https://wiki.debian.org/Sugar]] Test Report 2012-07-15-wheezy-raspbian.zip == |
− | ImportError: No module named gnome | + | :D/L: http://downloads.raspberrypi.org/images/raspbian/2012-07-15-wheezy-raspbian/2012-07-15-wheezy-raspbian.zip |
| + | :D/L: Minimal Image:http://www.linuxsystems.it/2012/06/raspbian-wheezy-armhf-raspberry-pi-minimal-image/ |
| + | :UnZip and write to 8 GB SDHC Card with dd |
| + | *Boot SDHC Card |
| + | * Text mode Configuration screen: |
| + | values tested |
| + | Raspi-config |
| + | |
| + | info information about this tool |
| + | expand_rootfs Expand root partition to fill SD card [x] |
| + | overscan Change overscan |
| + | configure_keyboard Set keyboard layout en-us |
| + | change_pass Change password for 'pi' user [x] |
| + | change_locale Set locale [x] |
| + | change_timezone Set timezone '''US-CA''' |
| + | memory_split Change memory split '''224/32''' (default=192MB/64MB (arm/videocore) |
| + | ssh Enable or Disable ssh server |
| + | boot_behavior Start desktop on boot? [x] |
| + | update Try to upgrade raspi-config |
| + | |
| + | {Select} {Finish} |
| + | |
| + | *Reboot |
| + | :resize occurs |
| + | :swap file is created |
| + | *RPi Desktop appears |
| + | *'''STILL TESTING'''--[[User:Satellit|Satellit]] 18:09, 5 August 2012 (EDT) |
| | | |
− | '''idle.activity v.2 Reports, Failed to start.'''
| + | == [[File:Debian.jpg|40px|link=https://wiki.debian.org/Sugar]] Test report debian6-19-04-2012.img == |
− | ImportError: No module named idlelib.PyShell
| + | :Debian info:https://wiki.debian.org/Sugar |
| + | :http://www.raspberrypi.org/downloads |
| + | :D/L: http://downloads.raspberrypi.org/images/debian/6/debian6-19-04-2012/debian6-19-04-2012.zip |
| + | :UnZip and write to 64 GB Ultra SDXC Card with dd |
| | | |
− | '''Read.activity v.99 Reports, Failed to start.'''
| + | *Boot SDXC Card |
− | ImportError: could not import gobject (error was:ImportError ('When using gi.repository you must not import static modules like "gobject". Please change all occurences of "import gobject" to "from gi.repository import GObject".',))
| + | login pi |
| + | password raspberry |
| + | startx |
| + | ===Install sugar-0.88=== |
| + | *LXTerminal: |
| + | :Root password is not known but "sudo su" goes to root terminal |
| + | sudo su |
| + | apt-get install sucrose-0.88 |
| + | apt-get update |
| + | apt-get install sugar-emulator-0.88 |
| + | *Start Education/Sugar from menu |
| + | :Activities loaded: |
| + | Browse |
| + | Read |
| + | *Jabber does not work |
| | | |
− | == Help, 1st install, IRC == | + | ===About my Computer=== |
− | With thanks --[[User:Inkyfingers|Inkyfingers]] 18:18, 27 June 2012 (EDT)
| + | Build: Debian GNU/Linux 6.0.4 (squeeze) |
| + | Sugar: 0.88.1 |
| + | ===Notes=== |
| + | *Activities that work D/L from ASLO (Browse) |
| + | IRC-10.xo |
| + | Turtle Art Mini-147 |
| + | Turtle Art 147 (very slow) |
| + | edit-8 |
| + | : |
| + | *Activities that are too large to run: |
| | | |
− | <inkyfingers> Image from: http://www.raspbian.org/ is Debian Hard Float (armhf) for RPi | + | GetBooks 11 |
− | <inkyfingers> Is armhf likely to be a problem for <sweets>?
| + | *Tried loading synaptic but it freezes loading catalogues. |
− | <alsroot> inkyfingers: I didn't try to run sugar on arm. OLPC people support it but I dunno do they use sugar directly from upstream brunches (what was used for sweets (not SD)) or not
| + | :apt-get remove synaptic |
− | <inkyfingers> #644010 is now marked fixed, wheezy seems fine to me with python 2.7 - I believe eliminated.
| + | ====Resize SD Card with gparted==== |
− | <alsroot> btw, whats exact sugar version you are running on Raspberry?
| + | *Get Sugar Journal full messages after several uses |
− | <inkyfingers> Ok tried sdk/sugar and dextrose/
| + | *Fix: |
− | <inkyfingers> dextrose marginally more success.[Edit ... at first]
| + | *Remove SDXC card - Insert in Laptop and start gparted |
− | <inkyfingers> I will try to write only about sweets dextrose/sugar:emulator
| + | :resize-move /dev/sdg2 to 20 GiB |
− | <inkyfingers> raspbian@pisces:~$ sweets dextrose/sugar:emulator
| + | *Reboot in RPi |
− | <inkyfingers> Xephyr on :30.0
| + | :No longer get journal full messages |
− | <inkyfingers> About my computer:
| + | *Activities that are too large to run: |
− | <inkyfingers> Build: Debian GNU/Linux testing/unstable
| + | Turtle Art 147 |
− | <inkyfingers> Sugar: 0.88.1
| + | GetBooks 11 |
− | ...
| |
− | <inkyfingers> raspbian@pisces:~$ sweets sdk/sugar:emulator
| |
− | <inkyfingers> -- Solve sdk/sugar-artwork for building
| |
− | <inkyfingers> -- Solve sdk/sugar-base for building
| |
− | <inkyfingers> -- Solve sdk/sugar-toolkit for building
| |
− | <inkyfingers> -- Solve sdk/sugar-datastore for building
| |
− | <inkyfingers> -- Solve sdk/telepathy-mission-control for building
| |
− | <inkyfingers> -- Solve sdk/sugar for building
| |
− | <inkyfingers> -- Build sdk/sugar-artwork (0.94.0)
| |
− | <inkyfingers> -- Build sdk/sugar-base (0.94.0)
| |
− | <inkyfingers> -- Build sdk/sugar-toolkit (0.94.0)
| |
− | <inkyfingers> -- Build sdk/sugar-datastore (0.94.0)
| |
− | <inkyfingers> -- Build sdk/telepathy-mission-control (5.7.1)
| |
− | <inkyfingers> -- Build sdk/sugar (0.94.1)
| |
− | <inkyfingers> this made me think Activities should be on-board?
| |
− | <inkyfingers> So that trace was just my first successful launch
| |
− | <inkyfingers> df -h (before that command)
| |
− | <inkyfingers> Filesystem Size Used Avail Use% Mounted on
| |
− | <inkyfingers> rootfs 3.3G 2.1G 1.1G 68% /
| |
− | <inkyfingers> df -h (now)
| |
− | <inkyfingers> rootfs 3.3G 2.2G 985M 69% /
| |
− | <inkyfingers> I could see no avatars in F1 in dextrose <seen fine in sdk, 0.94>
| |
− | <inkyfingers> I have no Activities in F3
| |
− | <alsroot> for activities, you can unzip some of them (that are pure python) to ~/Activities
| |
− | <inkyfingers> That would be a good next step.
| |
− | <inkyfingers> Two usb ports are used by mouse and kbd. I will prepare a USB stick next and try that out.
| |
− | <alsroot> inkyfingers: nope, this way you can't install activities
| |
− | <alsroot> inkyfingers: btw, how long it took to build sugar via "sweets" command? | |
− | <inkyfingers> Over 8 or 9 mins of 100% CPU | |