12,355
edits
Changes
Testing/Reports/ARM RPi (view source)
Revision as of 11:18, 23 February 2013
, 11:18, 23 February 2013→dd write SD: Use command "mount" in terminal to get correct device name eg:/dev/sdb /dev/sdc /dev/sdd etc.
*'''Unzip rpfr-f18-rc1.zip
*'''Unzip rpfr-f18-rc1.zip
====dd write SD====
====dd write SD====
# dd if=rpfr-f18-rc1.img of=/dev/sdc
# dd if=rpfr-f18-rc1.img of=/dev/sd(x)
6144000+0 records in
6144000+0 records in
6144000+0 records out
6144000+0 records out
3145728000 bytes (3.1 GB) copied, 717.468 s, 4.4 MB/s
3145728000 bytes (3.1 GB) copied, 717.468 s, 4.4 MB/s
*/dev/sd(x)
:Use command "mount" in terminal to get correct device name eg: /dev/sdb /dev/sdc /dev/sdd etc.
*'''CAUTION''' the device name has to be correct or you can damage your computers drives with no warning.
===Insert SD Card===
===Insert SD Card===