12,355
edits
Changes
Sugar Creation Kit/sck/Advanced Topics (view source)
Revision as of 17:58, 26 March 2014
, 17:58, 26 March 2014→Install XSCE: TESTS
*freenode #schoolserver
*freenode #schoolserver
:<timm_> "satellit: you are probably the first to do an install in this configuration. jabber is slow starting and sometimes times out." 03/21/2014
:<timm_> "satellit: you are probably the first to do an install in this configuration. jabber is slow starting and sometimes times out." 03/21/2014
*Do not know how to test schoolserver beyond this point.
=====TESTS=====
03/26/2014 tg
*Make .img from working 16 GB microSD:
*root terminal:
dd if=/dev/sdb of=XSCE_schoolserver.img bs=2M
7711+1 records in
7711+1 records out
16172187648 bytes (16 GB) copied, 911.25 s, 17.7 MB/s
*Compressed to xz makes 2.7 GB file
*Uncompressed this file and used dd to write the XSCE_schoolserver.img to a 16 GB microSD and it boots.
*I cannot reach http://schoolserver and http://schoolserver.local from this setup but I may be blocked with a firewall or have a bad config in eth0 or the wifi. Tested with XO-1.75
*Response from alex kleider
Tom, thanks for your response. Based on what I see
"""wlan0 ......
Mode: managed Access Point: Not associated
"""
and the fact that it has no IP address,
I'm guessing that it's not doing much of anything in its current state
but the fact that "Access Point" is even mentioned, suggests that
perhaps we can be guardedly optimistic that it might be do-able.
Please let me know if you make any progress in this regard.
It would probably require low level configuration commands similar to
"""
# We always bootup in AP mode. Delete any stale files
#rm -f /etc/wlanclient.mode
curdir=/root/k2.6.39.4
insmod $curdir/mlan.ko
i nsmod $curdir/sd8787.ko drv_mode=2
ifconfig uap0 192.168.1.1 up
"""
...
cheers,
alex kleider
=====Testing List=====
=====Testing List=====