Difference between revisions of "Activities/Measure"

From Sugar Labs
Jump to: navigation, search
(Adding instruments)
(Migrate to GitHub)
(13 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== Measure ==
Read at https://help.sugarlabs.org/measure.html
This Activity draws a picture of the sound heard by the internal microphone or of the signal present on the microphone socket. More specifically it draws a graph of this input versus time, the input is on the vertical axis and time is on the horizontal axis. That is, the laptop functions like a machine called an oscilloscope.  
As well as graphing signal as a function of time, Measure can also graph as a function of frequency.
The source file has been moved to [https://github.com/godiard/help-activity/blob/master/source/measure.rst GitHub]
The XO-1 laptop is only capable of mono input, the XO-1.5 and XO-1.75 are capable of stereo input on their microphone socket and can graph two signals at once.
'''Note:''' As of Measure Version 37, older versions of Sugar, e.g. 0.84, are no longer supported.
[[File:Measure tut 1 24.jpg|center|300px]]
===Where to get Measure===
1. Select secondary toolbar - allows the Activity's Journal entry to be renamed
2. Select secondary toolbar - measurement settings
3. Select secondary toolbar - tuning settings
4. Time base/frequency - graphs the signal vs. time or graphs amplitude vs. frequency
5. The time scale
6. Freeze the display
7. Capture sample now - saves an image of the wave in the Journal
8. Stop - exits the Activity
9. Mute - mute/unmute channel
10. Invert - invert the display
11. Use these sliders to control the sensitivity
12. The settings that are selected
===Sensor toolbar===
The sensor toolbar - measurement settings
13. Sound - use this setting with the internal microphone, external microphone and external AC signals
14. Resistance sensor - use with external resistive type transducers
15. Voltage sensor - use with external sensors which generate a voltage
16. Sample interval - a text file 'Measure Log' is saved to the journal, it contains one sample per interval
17. Starts/stops saving a text file 'Measure Log' with measured values as readable text
18. Trigger - synchronise the sample period to the waveform so that the sample will start on a rising edge or falling edge
''There is no 19.''
===Tuning toolbar===
The tuning toolbar - frequency settings
'''Hint:''' Adjust the time scale (#5) to increase the spacing between the tuning lines.
20. Instrument - select instrument to tune
21. Note entry - select a note for tuning
22. Frequency entry - enter a frequency to mark
23. Show/hide tuning mark
24. Show/hide harmonics
25. Play a note
26. Measured note
====Measuring A5 (880 HZ)====
====Guitar tuning lines====
Let the children experiment with the internal microphone, try singing, whistling, musical instruments, the Tam Tam musical Activity. The Turtle Blocks Activity can generate an audio tone.
The children should learn through guided discovery that:
* sound is a pressure wave
* the pitch of the sound is determined by the frequency or cycles per second (Hz)
* the loudness of a sound is determined by the amplitude
* sounds contain multiple frequency components or harmonics
* the more pure sounds have less harmonics
This Activity does not currently support sharing. However, it is useful to use one XO for measuring and another for generating sounds.
Measure is able to take input from a wide range of external sensors including switches, photocells, temperature sensors, inductive loops, hall effect sensors, soil probes and many more.
Care should be taken not to exceed the allowable input voltage:
* XO-1    -0.5V to 5V
* XO-1.5  -6V to +9V
* XO-1.75 -6V to +9V
It is a good idea, particularly on the XO-1, to put a resistor of 680 ohms in the phono plug, this increases the allowable input voltage range.
[[image:Audio 680 ohm.jpg|center|300px]]
You can use save data from measure to the Sugar Journal using the Capture feature described above ([[Activities/Measure#Using|16]]). These data can then be imported into [[Activities/SimpleGraph#Graphing_Measure_data|SimpleGraph]], where they are displayed.
===More ideas===
You can find ideas for fun science experiments at http://wiki.sugarlabs.org/go/Activities/TurtleArt/Using_Turtle_Art_Sensors and http://wiki.laptop.org/go/Measure
===Building sensors===
There are detailed  instructions for building sensors at [http://wiki.laptop.org/go/Measure#How_to_build_low_cost_sensors].
===Adding instruments===
You can add new instruments to tune by modifying the instrument dictionary in config.py.
    _('Guitar'): [82.4069, 110, 146.832, 195.998, 246.942, 329.628],
    _('Violin'): [195.998, 293.665, 440, 659.255],
    _('Viola'): [130.813, 195.998, 293.665, 440],
    _('Cello'): [65.4064, 97.9989, 146.832, 220],
    _('Bass'): [41.2034, 55, 73.4162, 97.9989],
    _('Charango'): [329.63, 392, 440, 523.25, 659.26],
    _('Ukulele'): [261.626, 329.628, 391.995, 440],
    _('Sitar'): [174.614, 130.813, 195.998, 65.4064, 391.995, 261.626, 523.251],
    _('Mandolin'): [195.998, 293.665, 440, 659.255],
    _('Recorder'): [391.995]
== Reporting problems ==
Make comments/suggestions on the [[Talk:Activities/Measure]] page.
Please file bugs at [https://bugs.sugarlabs.org/newticket?component=Meausre].
To list all open tickets of Measure, see [https://bugs.sugarlabs.org/query?status=accepted&status=assigned&status=new&status=reopened&component=Measure].
[[Category: Activity]]

Latest revision as of 02:34, 14 July 2018


Read at https://help.sugarlabs.org/measure.html

The source file has been moved to GitHub