1
edit
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + + + Line 10:
Line 12: − + + + − − − − − − Line 60:
Line 58: − + + + + + + + + + + + − + − + + + Line 73:
Line 83: − + + − + − +
Features/WPA-WPA2-Enterprise-Network-Connections/Testing (view source)
Revision as of 17:01, 2 January 2013
, 17:01, 2 January 2013→Setting up a RADIUS server (on a dedicated machine)
== Setting up a RADIUS server (on a dedicated machine) ==
== Setting up a RADIUS server (on a dedicated machine) ==
* Install "freeradius" rpm package
* Install "freeradius" rpm package
** sudo yum install freeradius
** sudo yum install freeradius
* Stop the server (if running)
** sudo killall radiusd
* Modify "/etc/raddb/clients.conf", to include the name of the network access-point/router. Sample files are present at
* Modify "/etc/raddb/clients.conf", to include the name of the network access-point/router. Sample files are present at
**[[Media:original_clients.doc]]
**[[Media:original_clients.doc]]
**[[Media:modified_users.doc]]
**[[Media:modified_users.doc]]
**[[Media:diff_users.doc]]
**[[Media:diff_users.doc]]
* Start the server, by issuing the following command
*Fedora 17 users, please run the following command, before starting the radius server:
**sudo mv /etc/raddb/modules/dhcp_sqlippool ~
* Start the server, by issuing the following command:
** sudo /usr/sbin/radiusd -X &
** sudo /usr/sbin/radiusd -X &
== Setting up the access-point / router ==
== Setting up the access-point / router ==
== Connecting a client - PEAP-based authentication ==
== Connecting a client - LEAP-based authentication ==
* Help required !!!!
* We have not been able to set-up a LEAP-authentication-supported access-point / router.
* Any CISCO guys !!??
== Connecting a client - TTLS-based authentication ==
* Navigate to the "Neighbourhood view" on the XO.
* Navigate to the "Neighbourhood view" on the XO.
* Click on the network-icon, and enter the parameters, as seen in the following screenshot.
* Click on the network-icon, and enter the parameters, as seen in the following screenshot (thanks to Anish, for showing me this minimal configuration).
** [[File:PEAP_authentication.png]]
** [[File:TTLS_authentication.png]]
* NOTES
** The above configuration is a minimalistic configuration. However, the parameters-cum-secrets modal-dialog, has been modelled on nm-applet.
== Connecting a client - TTLS-based authentication ==
== Connecting a client - PEAP-based authentication ==
* Navigate to the "Neighbourhood view" on the XO.
* Navigate to the "Neighbourhood view" on the XO.
* Click on the network-icon, and enter the parameters, as seen in the following screenshot (thanks to Anish, for showing me this minimal configuration).
* Click on the network-icon, and enter the parameters, as seen in the following screenshot.
** [[File:TTLS_authentication.png]]
** [[File:PEAP_authentication.png]]
* NOTES
* NOTES
** The above configuration is a minimalistic configuration. However, the parameters-cum-secrets modal-dialog, has been modelled on nm-applet.
** The above configuration is a minimalistic configuration. However, the parameters-cum-secrets modal-dialog, has been modelled on nm-applet.