Difference between revisions of "Fedora 32"

From Sugar Labs
Jump to navigation Jump to search
Line 14: Line 14:
 
===Rpi===
 
===Rpi===
 
:Note there is no rpi4 support at this time
 
:Note there is no rpi4 support at this time
 +
====Raspberry_Pi====
 +
"Fedora supports the the Raspberry Pi Model 2B and 3-series of devices including the 3B, 3B+, 3A+, 3CM and 3CM+ in Fedora 29 and later releases."
 +
* https://www.balena.io/etcher/  ( Used to flash micro-sd)
 +
 +
* https://fedoraproject.org/wiki/Architectures/ARM/Raspberry_Pi (read this first)
 +
* https://dl.fedoraproject.org/pub/fedora/linux/releases/30/Spins/armhfp/images/ (f30-1.2 release)
 +
* https://www.tomshardware.com/reviews/raspberry-pi-command-line-commands,6159.html
 +
* https://mirrors.rit.edu/fedora/fedora/linux/releases/29/Spins/armhfp/images/
 +
* https://fedoraproject.org/wiki/Architectures/ARM
 +
* https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md  (determining raspberrypi versions)
 +
* https://dl.fedoraproject.org/pub/fedora/linux/development/30/Spins/armhfp/images/
 +
* https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Spins/armhfp/images/ (f31 rawhide)
 +
*  https://github.com/sugarlabs/sugar/blob/master/docs/rpi-soas.md
 +
::https://wiki.sugarlabs.org/go/Sugar_Creation_Kit/sck/Advanced_Topics#Raspberry_Pi_.2F_RPi  (old work)
 +
::https://wiki.cdot.senecacollege.ca/wiki/Raspberry_Pi_Fedora_Remix_Installation
 +
::https://www.raspberrypi.org/downloads/
 +
::http://pidora.ca/
 +
::https://elinux.org/RPi_Distributions#Fedora_Remix
 +
::https://fedoraproject.org/wiki/QA:Testcase_Virt_ARM_on_x86  (install arm in VMM)
 +
===Rpi-FAQ===
 +
* https://www.beyondlogic.org/an-introduction-to-chardev-gpio-and-libgpiod-on-the-raspberry-pi/
 +
* https://github.com/bookwar/python-gpiodev
 +
* https://www.beyondlogic.org/compiling-u-boot-with-device-tree-support-for-the-raspberry-pi/
 +
* https://www.tomshardware.com/news/raspberry-pi-4-ssd-test,39811.html
 +
 
=====Installation method used for testing=====
 
=====Installation method used for testing=====
 
#Download Fedora-SoaS-armhfp..sda.raw.xz file to /Downloads
 
#Download Fedora-SoaS-armhfp..sda.raw.xz file to /Downloads

Revision as of 14:06, 21 September 2019

Fedora.jpg Fedora® version page: 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 |
Fedora and the Infinity design logo are trademarks of Red Hat, Inc.

some of the older versions listed here ^ may be security risks- for archive purposes only

Fedora 32

Fedora 32 Rawhide

  • updated Sept/21/2019
PAGE UNDER CONSTRUCTION

Rawhide

Rpi

Note there is no rpi4 support at this time

Raspberry_Pi

"Fedora supports the the Raspberry Pi Model 2B and 3-series of devices including the 3B, 3B+, 3A+, 3CM and 3CM+ in Fedora 29 and later releases."

https://wiki.sugarlabs.org/go/Sugar_Creation_Kit/sck/Advanced_Topics#Raspberry_Pi_.2F_RPi (old work)
https://wiki.cdot.senecacollege.ca/wiki/Raspberry_Pi_Fedora_Remix_Installation
https://www.raspberrypi.org/downloads/
http://pidora.ca/
https://elinux.org/RPi_Distributions#Fedora_Remix
https://fedoraproject.org/wiki/QA:Testcase_Virt_ARM_on_x86 (install arm in VMM)

Rpi-FAQ

Installation method used for testing
  1. Download Fedora-SoaS-armhfp..sda.raw.xz file to /Downloads
  2. extract here to expand to Fedora-SoaS-armhfp..sda.raw.xz file
  3. start Fedora Media Writer/select Fedora-SoaS-armhfp..sda.raw file in "Custom"
  4. insert micro SD into usb Card Reader and plug in it's USB
  5. select RPiB3+ and write Fedora-SoaS-armhfp..sda.raw.xz file
  6. exit Fedora MediaWriter
  7. start gparted and expand partition 3 to full size of micro SD (Class 10 32 GB)
  8. insert mico SD in RPi3B+ slot and power up.