Sugar Creation Kit/sck/Installation test Cases

Select this box when it appears:[Configure network Interface]

liveinst to Hard Drive from booted CD

  • boot CD
  • In sugar_terminal:
su
livinst
use whole disk non LVM
  • Boot from Hard Drive
Successful Boot?

netinstall to hardisk-sugar only

  • IMPORTANT Memory Required for F17 & Testing in Virtualbox of anaconda (liveinst) 1024 minimum should be used
Message that 769 MB memory is required. (I have been told that this is hard wired in anaconda) 
  1. Download http://dl.fedoraproject.org/pub/alt/stage/17-Beta.TC2/Fedora/i386/iso/Fedora-17-Beta-TC2-i386-netinst.iso
  2. Install to Hard Drive, VirtualBox, or 8 GB USB
  3. select customize now wait for download of selections
  4. Select Sugar-Desktop
  5. De-select Gnome
  6. Install
  7. Does the Install Boot
  8. Firstboot
  9. Does Sugar start?

netinstall to hardisk with Gnome

  • IMPORTANT Memory Required for F17 & Testing in Virtualbox of anaconda (liveinst) 1024 minimum should be used
Message that 769 MB memory is required. (I have been told that this is hard wired in anaconda) 
  1. Download http://dl.fedoraproject.org/pub/alt/stage/17-Beta.TC2/Fedora/i386/iso/Fedora-17-Beta-TC2-i386-netinst.iso
  2. Install to Hard Drive, VirtualBox, or 8 GB USB
  3. select customize now wait for download of selections
  4. Select Sugar-Desktop
  5. Install
  6. Does the Install Boot
  7. Firstboot
  8. Does Sugar start?

DVD install to hardisk-sugar only

  • IMPORTANT Memory Required for F17 & Testing in Virtualbox of anaconda (liveinst) 1024 minimum should be used
Message that 769 MB memory is required. (I have been told that this is hard wired in anaconda) 
  1. Download http://dl.fedoraproject.org/pub/alt/stage/17-Beta.TC2/Fedora/i386/iso/Fedora-17-Beta-TC2-i386-DVD.iso
  2. Install to Hard Drive, VirtualBox, or 8 GB USB
  3. select customize now wait for download of selections
  4. Select Sugar-Desktop
  5. De-select Gnome
  6. Install
  7. Does the Install Boot
  8. Firstboot
  9. Does Sugar start?

DVD install to hardisk with Gnome

  • IMPORTANT Memory Required for F17 & Testing in Virtualbox of anaconda (liveinst) 1024 minimum should be used
Message that 769 MB memory is required. (I have been told that this is hard wired in anaconda) 
  1. Download http: not available until Beta Release
  2. Install to Hard Drive, VirtualBox, or 8 GB USB
  3. select customize now wait for download of selections
  4. Select Sugar-Desktop
  5. Install
  6. Does the Install Boot
  7. Firstboot
  8. Does Sugar start?

tools_livecd-iso-to-disk install Fedora-17-Beta-i686-Live-Soas

Download link:http://koji.fedoraproject.org/koji/getfile?taskID=3978921&name=Fedora-17-Beta-i686-Live-SoaS.iso
  • Set the tools_livecd-iso-to-disk.sh script as executable (Properties)
Download link:http://git.fedorahosted.org/git/?p=hosted/livecd;a=blob;f=tools/livecd-iso-to-disk.sh;hb=HEAD

Prepare USB Stick

  • 4 GB
Fat 16; boot flag set
NOTE: use diskutility to unmount /dev/sdg1
  • DO NOT TRY TO UPDATE Update is too large and will fill up disk

Terminal Command

  • /dev/sd(x)1 (x) is the device name: enter mount in terminal to what it is. eg: /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sdg1 be sure to add the partition number (1) to command
  • Type "mount" in terminal to see device name
sudo ./tools_livecd-iso-to-disk.sh --reset-mbr --overlay-size-mb 500 --home-size-mb 700 --delete-home --unencrypted-home Fedora-17-Beta-i686-Live-SoaS.iso /dev/sd(x)1

Graphical liveusb-creator

Prepare USB Stick

  • 4 GB
Fat 16; boot flag set label=LIVE (caps)

Install Graphical liveusb-creator

  • Boot the Live CD
http://koji.fedoraproject.org/koji/getfile?taskID=3978921&name=Fedora-17-Beta-i686-Live-SoaS.iso
http://koji.fedoraproject.org/koji/getfile?taskID=3978922&name=Fedora-17-Beta-x86_64-Live-SoaS.iso
  • sugar terminal:
su
yum install liveusb-creator
liveusb-creator

Graphical liveusb-creator starts

insert prepared usb-stick and note it's label appear ie: /dev/sd(x)1 (LIVE)
  • [Use existing Live CD]
insert 2nd USB (not target) with .iso
look in /run/media/liveuser/(usb label)
select .iso [Open]
  • move Persistent Storage (xxx) slider to desired size
  • [Create Live USB]