Changes

Jump to navigation Jump to search
4,064 bytes added ,  12:10, 26 February 2015
no edit summary
Line 1: Line 1: −
<noinclude>{{TOCright}}</noinclude>
+
<noinclude>
 +
[[Category:HowTo]]
 +
</noinclude>
 
== Introduction ==
 
== Introduction ==
This page provides additional detail for installing the most stable, released version of Sugar on a Stick (SoaS), '''[http://download.sugarlabs.org/soas/releases/soas-2-blueberry.iso]''' on a USB flash storage device using GNU/Linux.
     −
: To explore a variety of '''experimental''' options for putting a [[What is Sugar?|Sugar]] image on a USB or SD flash drive under GNU/Linux, see the following pages:
+
The page [[Sugar on a Stick/Linux/Installation]] provides up-to-date and concise instructions for loading  the most recent released version of [[Sugar on a Stick]] (SoaS) onto a USB/SD flash storage device using GNU/Linux.
 +
 
 +
==livecd-iso-to-disk tool==
 +
 
 +
Before experimenting beyond the instructions in the link above, please read [[fedora:How to create and use Live USB]] for more background details. That page starts with Direct Write methods of creating a (non-persistent) Live USB system, and further down the page describes using the livecd-iso-to-disk tool which is the prefered method of making persistent Sugar on a Stick.
 +
 
 +
The reader should be aware that Ubuntu/Debian use a method to create a live USB system which is fundamentally different to Fedora's method, used by Sugar.
 +
 
 +
:''Quote from the above Fedora page''
 +
 
 +
: '''Issues using other Linux distributions'''
 +
 
 +
: Ubuntu and derivative Linux distributions have a usb-creator program similar to Live USB Creator. This does not work with Fedora ISO images, it silently rejects them. usb-creator requires the ISO to have a Debian layout, with a /.disk/info file and a casper directory. Do not attempt to use this utility to write a Fedora ISO image.
 +
 
 +
: The livecd-iso-to-disk script is not meant to be run from a non-Fedora system. Even if it happens to run and write a stick apparently successfully from some other distribution, the stick may well fail to boot. Use of livecd-iso-to-disk on any distribution other than Fedora is unsupported and not expected to work: please use an alternative method, such as the "direct write" methods described above.
 +
:''end Quote''
 +
 
 +
=== Persistence ===
 +
Persistence in the context of a live USB system, is the ability to save both system changes, including Software updates, and the user's work between sessions, that is after shutdown and reboot.
 +
 
 +
==Linux users, suggested methods ==
 +
 
 +
Linux users might consider reading the following pages for supported methods to install SoaS.
 +
 
 +
'''Users of Fedora and Red Hat derivitives:'''
 +
:[[Sugar on a Stick/Linux/Installation]]
 +
 
 +
'''Debian, Ubuntu, and derivitives, and other distros:'''
 +
 
 +
:Make your SoaS from within a Sugar Live OS environment, which is itself a Fedora system.
 +
 
 +
: '''Either''' Burn a Sugar.iso and follow the section of [[Sugar on a Stick/Installation]] entitled
 +
 
 +
:: "1. Burn a CD-ROM disc, boot from it, then run the script, ''livecd-iso-to-disk''"
 +
 
 +
: '''or''' create a Sugar image by dd or any of the methods on [[ Testing/Reports/Sugar_on_a_Stick_Persistence|this page]]. Then boot into the Live OS, to create SoaS from the running Live OS image.
   −
: [[Sugar on a Stick/Beta|SoaS v2 test builds]] | [[Sugar on a Stick/Installation/OLPC|OLPC XO-1]] | [[Sugar on a Stick/Linux/openSUSE|openSUSE]] | [[Trisquel On A Sugar Toast|Trisquel]] | [[VirtualBox]] | [[VMware]] | [[Sugar on a Stick/Linux/Non-compressed Fedora|non-compressed Fedora]] | [[:Category:Live USB|all known portable Sugar distributions]]
      
If you have questions, trouble, or feedback, please let us know on the [[{{TALKPAGENAMEE}}|discussion]] page. If you can improve these instructions, please edit the page and do so!
 
If you have questions, trouble, or feedback, please let us know on the [[{{TALKPAGENAMEE}}|discussion]] page. If you can improve these instructions, please edit the page and do so!
*Also See this reference for details:[http://fedoraproject.org/wiki/How_to_create_and_use_Live_USB#Graphical_Method_-_Windows_or_Linux]
     −
== Put SoaS onto a stick using Fedora or Ubuntu ==
+
==Experimental==
 +
 
 +
To explore a variety of experimental options for putting a [[What is Sugar?|Sugar]] image on a USB or SD flash drive under GNU/Linux, see the following pages:
   −
This is known to work in Fedora and Ubuntu.
+
[[Sugar on a Stick/Beta|SoaS test builds]] | [[Sugar on a Stick/Installation/OLPC|OLPC XO-1]] | [[Sugar on a Stick/Linux/openSUSE|openSUSE]] | [[Trisquel On A Sugar Toast|Trisquel]] | [[VirtualBox]] | [[VMware]] | [[Sugar on a Stick/Linux/Non-compressed Fedora|non-compressed Fedora]] | [[:Category:Live USB|Live USB: (all known portable Sugar distributions)]]
   −
First, download a SoaS-2-blueberry <tt>.iso</tt> image from  [[http://download.sugarlabs.org/soas/releases/soas-2-blueberry.iso], then return here.
+
=== Load SoaS further insight ===
   −
::<small>(A program called UNetBootin available at http://unetbootin.sourceforge.net/ does all this magic for you... or you can do the magic yourself:)</small>
+
This is known to work in Fedora and has been reported to work in Ubuntu.
   −
* Make sure you have the ''syslinux'' package installed on the operating system that you will use to prepare the Live USB image. It is recommended that you also have the ''isomd5sum'' package installed. The ''cryptsetup'' package is another option potentially used by the "livecd-iso-to-disk" installation script. (On Ubuntu, <code>sudo apt-get install syslinux isomd5sum cryptsetup</code> will install the packages. They are also available through the Synaptic Package Manager.)
+
First, download a SoaS {{Code|.iso}} image from  http://spins.fedoraproject.org/soas/#downloads, then return here.
 +
 
 +
* Make sure you have the ''syslinux'' package installed on the operating system that you will use to prepare the Live USB image. It is recommended that you also have the ''isomd5sum'' package installed. The ''cryptsetup'' package is another option potentially used by the "livecd-iso-to-disk" installation script. (On Ubuntu, {{Code|sudo apt-get install syslinux isomd5sum cryptsetup}} will install the packages. They are also available through the Synaptic Package Manager.)
 
:: <small>(On Gentoo, one needs to uncomment 'SAMPLE FILE' in /etc/mtools/mtools.conf to make syslinux work.)</small>
 
:: <small>(On Gentoo, one needs to uncomment 'SAMPLE FILE' in /etc/mtools/mtools.conf to make syslinux work.)</small>
 
:*''[[wikipedia:Syslinux|syslinux]]'' is needed to set up booting on the FAT file system of the USB disc or Live CD.
 
:*''[[wikipedia:Syslinux|syslinux]]'' is needed to set up booting on the FAT file system of the USB disc or Live CD.
 
:*''[[wikipedia:md5sum|isomd5sum]]'' is needed for the recommended verification step, which checks that the .iso file is complete after its travels. If there is a problem with the .iso file, the script will exit and provide a failure message.  The verification step can be bypassed by using the <code>--noverify</code> option.
 
:*''[[wikipedia:md5sum|isomd5sum]]'' is needed for the recommended verification step, which checks that the .iso file is complete after its travels. If there is a problem with the .iso file, the script will exit and provide a failure message.  The verification step can be bypassed by using the <code>--noverify</code> option.
:*''[[wikipedia:dm-crypt|cryptsetup]]'' is only needed for the option to provide password protection and encryption for the persistent /home/liveuser folder. It is not necessary if one applies the  recommended <code>--unencrypted-home</code> option. The <code>--unencrypted-home</code> option is preferred because the reduced overhead improves robustness with the compressed ''[[wikipedia:SquashFS|SquashFS]]'' file system employed by the Live USB deployment.
+
:*''[[wikipedia:dm-crypt|cryptsetup]]'' is only needed for the option to provide password protection and encryption for the persistent /home/liveuser folder. It is not necessary if one applies the  recommended {{Code|--unencrypted-home}} option. The {{Code|--unencrypted-home}} option is preferred because the reduced overhead improves robustness with the compressed ''[[wikipedia:SquashFS|SquashFS]]'' file system employed by the Live USB deployment.
* Plug in a 1-GB or larger USB stick into your computer.
+
* Plug in a 2 GB or larger USB stick into your computer.
* Download the installation script: http://download.sugarlabs.org/soas/releases/livecd-iso-to-disk.sh (23 June 2009).<br>(You will execute this script several steps below.)
+
* Mount the 'SoaS.iso' image to reach the onboard livecd-iso-to-disk installation script:
* Check the USB device name. In the example below, the '''s'''torage '''d'''evice is /dev/sdb and filesystem partition on that device is /dev/sdb1:
+
: {{Code|sudo mkdir /run/soas/}}
: <tt>'''df -h'''</tt>
+
: {{Code|sudo mount /path/to/Fedora-Live-SoaS-x86_64-20-1 /run/soas/}}
Filesystem           Size  Used Avail Use% Mounted on
+
:: (mount: /dev/loop0 is write-protected, mounting read-only)
/dev/sda1              19G 7.0G  11G 40% /
+
* Change the working directory to the LiveOS folder on the SoaS.iso mount:
tmpfs                1.5G     0  1.5G   0% /lib/init/rw
+
: {{Code|cd /run/soas/LiveOS}}
varrun                1.5G  96K 1.5G   1% /var/run
+
* Execute {{Code|./livecd-iso-to-disk --help}} for usage details. (The file is already executable.)
varlock              1.5G    0 1.5G   0% /var/lock
+
 
  udev                  1.5G  2.9M 1.5G   1% /dev
+
* Check the USB device node name on your system. In the example below, the <abbr title="small computer system interface">'''s'''csi</abbr> '''d'''evice is /dev/sdc and filesystem partition on that device is /dev/sdc1:
tmpfs                 1.5G  104K 1.5G   1% /dev/shm
+
<pre>
  lrm                  1.5G  2.0M 1.5G   1% /lib/modules/2.6.27-11-generic/volatile
+
$ df -Th
  /dev/sdb1            996M 913M   84M  92% /mnt/myUSBdisc
+
Filesystem   Type    Size  Used Avail Use% Mounted on
 +
rootfs      rootfs    20G  12G 7.5G 61% /
 +
udev      devtmpfs    1.6G     0  1.6G   0% /dev
 +
tmpfs        tmpfs    1.6G  904K 1.6G   1% /dev/shm
 +
tmpfs        tmpfs    1.6G  788K 1.6G   1% /run
 +
/dev/sda2    ext4    20G  12G 7.5G  61% /
 +
tmpfs        tmpfs    1.6G    0 1.6G   0% /sys/fs/cgroup
 +
tmpfs       tmpfs    1.6G    0 1.6G   0% /media
 +
/dev/sda2    ext4    20G  12G 7.5G  61% /tmp
 +
/dev/sda2    ext4    20G  12G 7.5G 61% /var/tmp
 +
/dev/sda2    ext4    20G  12G  7.5G  61% /home
 +
/dev/loop0 iso9660    668M 668M    0 100% /run/soas
 +
/dev/sdc1    vfat    3.8G  4.0K 3.8G   1% /run/media/MyAccount/MyUSBdiscMountPoint
 +
</pre>
 +
 
 +
Another way to find out the USB device node name on your system is issuing the command
 +
 
 +
    sudo fdisk -l
   −
* Unmount the drive,<br>
+
and looking in the output for the disk that corresponds to the USB device, e.g., a disk described with a stanza like
: <tt>sudo umount /dev/sd''b1''</tt>
     −
* Then check to see that the partition is marked as bootable,<br>
+
    Disk /dev/sd'''?''': 1939 MB, 1939865600 bytes
: <tt>sudo fdisk '''-l'''</tt> ''<----that's a lowercase letter 'L' for the '''l'''ist option.''
+
    150 heads, 42 sectors/track, 601 cylinders, total 3788800 sectors
You should see output that looks like this:
+
    Units = sectors of 1 * 512 = 512 bytes
Disk /dev/sdb: 1047 MB, 1047265280 bytes
+
    Sector size (logical/physical): 512 bytes / 512 bytes
255 heads, 63 sectors/track, 127 cylinders
+
    I/O size (minimum/optimal): 512 bytes / 512 bytes
Units = cylinders of 16065 * 512 = 8225280 bytes
+
    Disk identifier: 0x000e14bf
Disk identifier: 0x0008325f
+
   
.
+
    Device Boot      Start        End      Blocks  Id  System
  Device Boot      Start        End      Blocks  Id  System
+
     /dev/sd'''?'''1  *        2048    3784703    1891328    c  W95 FAT32 (LBA)
/dev/sdb1  *          1        127     1020096    6  FAT16
  −
The '*' under the Boot column is what you want to see.
  −
: If not, then
  −
:* For Ubuntu 8.10, menu: System -> Administration -> Partition Editor (GParted).
  −
::# Select your USB device (/dev/sd''b'' for the rest of these instructions),
  −
::# then your partition (/dev/sd''b1''),
  −
::# then menu: Partition -> Manage Flags,
  −
::# check the boot box,
  −
::# and Close to mark the partition as bootable.
     −
:* For Fedora,
+
where '''?''' in /dev/sd'''?''' is (usually) a letter of the alphabet.
::#  <tt>parted /dev/sd''b''</tt>
  −
::# toggle 1 boot
  −
::# quit
     −
* Change mode to make the script executable.
+
If you have only '''one''' storage device with 2 GB of nominal capacity, it will be easy to recognize the USB device in the fdisk output by looking at which device has (about) 2 GB of capacity. In the example above, "Disk /dev/sd'''?'''" reports to be as large as ''1939 MB'', that is almost 2 GB.
: <tt>chmod +x livecd-iso-to-disk.sh</tt>
  −
* Run it as root, making sure to pass the correct USB device and to set overlay and home size appropriately, depending on the stick size.
  −
: <tt>sudo ./livecd-iso-to-disk.sh --overlay-size-mb 300 --home-size-mb 160 --delete-home --unencrypted-home soas-strawberry.iso /dev/sd''b1''</tt>
  −
:: '''Note:''' With the soas-2-blueberry.iso, leave out the 3 options for a separate persistent home.  The script will complete successfully, but the new installation startup process will have trouble finding the home folder and fail to complete.
     −
:: Normally, the ''livecd-iso-to-disk'' installation has the advantage over the ''liveusb-creator'' installation method by allowing a persistent /home/liveuser folder with the <tt>--home-size-mb ''NNN''</tt> option. This feature would allow you to update the OS image while keeping the user files (by running the script against your existing installation but <u>leaving out</u> the --home-size-mb NNN option).
+
If you have '''more than one''' disk with about 2 GB of capacity, consider moving to a situation where you'll have only '''one''' device with 2 GB of capacity, because this will help out a lot in recognizing the drive correctly.
::* The <code>--delete-home</code> option is used to avoid an error message while requesting both a new home (with <code>--home-size-mb</code>) and a persistent home (indirectly with <code>--unencrypted-home</code>). You wouldn't use the --delete-home option on an upgrade of the operation system only.
  −
:Depending on the size of your USB stick, you may have to decrease <code>--overlay-size-mb</code> and <code>--home-size-mb</code> values (for example, for a 1-GB stick, use 200 for each).
  −
:* If you get an error about udevinfo, you have the new version of udev where "udevadm info" is the proper command.
  −
:*:Create an executable file called udevinfo somewhere in your path with the following contents:
  −
:::<code>#!/bin/bash</code><br>
  −
:::<code>udevadm info $*</code>
  −
:* Watch out for errors in the output of the script, the script seems to ignore them! (and say all is fine on the last line).
     −
===livecd-iso-to-disk.sh transcript===
+
* Unmount the drive,<br>
 +
: {{Code|sudo umount /run/media/MyAccount/MyUSBdiscMountPoint}}
 +
:: <small>(The {{Code|/run/media/MyAccount/}} path is the new, standard Fedora mount point. Other operating systems may use {{Code|/media/MyMountPoint}}.)</small>
 +
{{:Sugar on a Stick/Linux/bootable device}}
   −
$ sudo ./livecd-iso-to-disk.sh --overlay-size-mb 300 --home-size-mb 160 --delete-home --unencrypted-home Soas2-200906211228.iso /dev/sdb1
+
* Run {{Code|livecd-iso-to-disk}} as the root user, making sure to pass the correct USB device node name and to set overlay and home size appropriately, depending on the target USB device storage capacity.
Verifying image...
+
:<div style="padding: 1em; border: 1px dashed #2F6FAB; background-color: #FBFBFB; margin: 1em 0px 1em 0em; font-family: Courier;">./livecd-iso-to-disk --reset-mbr --overlay-size-mb '''500''' --home-size-mb '''800''' --unencrypted-home '''/path/to/downloaded'''.iso /dev/sd'''?'''1</div>
/home/walter/Desktop/Soas2-200906211228.iso:  9f1aa3c7a19dd9c68d1047d681f703c6
+
: If the command fails telling you that /dev/sd'''?'''1 does not exist, try using the command for /dev/sd'''?''' (the name of the device) and not for /dev/sd'''?'''1 (the name of the partition), like this:
Fragment sums: f5ddb7deb26b6474bd59be9f57b6c7abcd624e1ccc682ddf664ba73da4ed
  −
Fragment count: 20
  −
Checking: 100.0%
  −
  −
The media check is complete, the result is: PASS.
  −
  −
It is OK to use this media.
  −
Copying live image to USB stick
  −
Updating boot config file
  −
Initializing persistent overlay file
  −
300+0 records in
  −
300+0 records out
  −
314572800 bytes (315 MB) copied, 88.7551 s, 3.5 MB/s
  −
Initializing persistent /home
  −
160+0 records in
  −
160+0 records out
  −
167772160 bytes (168 MB) copied, 48.1191 s, 3.5 MB/s
  −
Formatting unencrypted /home
  −
mke2fs 1.41.4 (27-Jan-2009)
  −
Filesystem label=
  −
OS type: Linux
  −
Block size=1024 (log=0)
  −
Fragment size=1024 (log=0)
  −
40960 inodes, 163840 blocks
  −
8192 blocks (5.00%) reserved for the super user
  −
First data block=1
  −
Maximum filesystem blocks=67371008
  −
20 block groups
  −
8192 blocks per group, 8192 fragments per group
  −
2048 inodes per group
  −
Superblock backups stored on blocks:  
  −
8193, 24577, 40961, 57345, 73729
  −
  −
Writing inode tables: done                           
  −
Creating journal (4096 blocks): done
  −
Writing superblocks and filesystem accounting information: done
  −
  −
This filesystem will be automatically checked every 28 mounts or
  −
180 days, whichever comes first.  Use tune2fs -c or -i to override.
  −
tune2fs 1.41.4 (27-Jan-2009)
  −
Setting maximal mount count to -1
  −
Setting interval between checks to 0 seconds
  −
Installing boot loader
  −
USB stick set up as live image!
     −
==Use liveusb-creator to make new Live USB as Installer USB (Unsupported and Experimental)==
+
:<div style="padding: 1em; border: 1px dashed #2F6FAB; background-color: #FBFBFB; margin: 1em 0px 1em 0em; font-family: Courier;">./livecd-iso-to-disk --reset-mbr --overlay-size-mb '''500''' --home-size-mb '''800''' --unencrypted-home '''/path/to/downloaded'''.iso /dev/sd'''?'''</div>
   −
===Make Installer USB===
+
: If the command fails returning a complaint about the filesystem not being mounted, '''and''' you can afford to '''loose all data on the USB device''', you can try reformatting the USB device filesystem:
1-)use soas-2-blueberry CD to make 4GB or Better 8GB Live USB with liveusb-creator
     −
First boot from soas-2-blueberry CD
+
:* mount the USB device (e.g., by unplugging and re-inserting it),
In Terminal:
+
:* repeat the steps for learning its device name (there can be situations when the device name has changed!)
zyx-liveinstaller
+
:* issue the command with the '''{{Code|--format --msdos}}''' options, like this:
install to fat 16 or fat 32 USB
+
{{Note/warning|Warning|The command described here will ask for a confirmation and will '''destroy''' all pre-existing data on your USB device.<br>
choose / and /boot as same /dev/sd(x)* Be sure it is your USB not your Hard Disk!
+
See also [[olpc:How_to_Damage_a_FLASH_Storage_Device|How to Damage a FLASH Storage Device]] for a discussion of why using the factory format is preferred.}}
when finished exit from soas-2-blueberry
+
::<div style="padding: 1em; border: 1px dashed #2F6FAB; background-color: #FBFBFB; margin: 1em 0px 1em 0em; font-family: Courier;">./livecd-iso-to-disk --reset-mbr '''--format --msdos''' --overlay-size-mb '''500''' --home-size-mb '''800''' --unencrypted-home '''/path/to/downloaded'''.iso /dev/sd'''?'''</div>
   −
*(hint in terminal: enter "gparted" and look at the available HD and USB and note name you want to use. Exit gparted)
+
: {{Highlight|In the above examples, the {{Code|'''/path/to/downloaded'''.iso}} may be substituted with {{Code|/dev/loop0}}, as this is the loop device that the mount command chose.}}
   −
2-)Boot from USB made with zyx-liveinstaller
+
{{Note/note|Note| Additional USB or SD devices may be loaded from a running ''Sugar on a Stick'' image that was loaded with the livecd-iso-to-disk script (but not those installed by other methods) by running this command in the Terminal Activity as a root user:}}
In terminal:
+
:<div style="padding: 1em; border: 1px dashed #2F6FAB; background-color: #FBFBFB; margin: 1em 0px 1em 0em; font-family: Courier;">/run/initramfs/live/LiveOS/livecd-iso-to-disk --reset-mbr --overlay-size-mb '''500''' --home-size-mb '''800''' --unencrypted-home /run/initramfs/livedev /dev/sd'''?'''1</div>
su -
  −
root #
  −
yum install liveusb-creator
  −
(13 files 22MB will download)
     −
===Use liveusb-creator to make new Live USB===
+
: The ''livecd-iso-to-disk'' installation method has other advantages over the ''liveusb-creator'' method by allowing the creation of a separate,  persistent /home/liveuser folder with the <tt>--home-size-mb ''NNN''</tt> option. This feature avoids consumption of the persistent overlay for Activity storage (see [[LiveOS image]]) and allows one to update the OS image while keeping the user files (by running the script against your existing installation but <u>leaving out</u> the --home-size-mb NNN option).
3-) Insert CD ('''or another USB''') containing soas xxxxx.iso  (note this is .iso not Burned CD from .iso)
+
::* A {{Code|--delete-home}} option is available to avoid an error message while requesting both a new home (with {{Code|--home-size-mb}}) when there is already a persistent home on the device). You wouldn't use the --delete-home option on an upgrade of the operating system only.
 +
:Depending on the size of your USB stick, you may have to decrease {{Code|--overlay-size-mb}} and {{Code|--home-size-mb}} values (for example, for a 2 GB stick, use 500 for the overlay and 800 for the home folder).
 +
:: If you have sufficient capacity on your target device, and format it with an ext[234] filesystem to overcome the 4096-MB fat32 file size limit, you may avoid the SquashFS compression by including the {{Code|--skipcompress}} option in the script command line.
 +
:* Watch out for errors in the output of the script, the script seems to ignore them! (and say all is fine on the last line).
   −
4-) Insert 2nd USB stick to use to make LiveUSB (suggested format: fat16,) '''minimum size: 4GB'''
+
===livecd-iso-to-disk transcript===
   −
In terminal:"liveusb-creator"
+
<pre>
select correct USB (usually 1 letter higher than your boot USB)
+
[LiveOS]$ sudo ./livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 800 --unencrypted-home /home/MyAccount/Downloads/Fedora-Live-SoaS-x86_64-20-1.iso /dev/sdc1
ie: if Booted USB is /dev/sda target USB will be /dev/sdb
+
Verifying image...
select to find CD with .iso file
+
/home/MyAccount/Downloads/Fedora-Live-SoaS-x86_64-20-1.iso:    b0a9414ff7eb79b680d5c86440e19587
move slider to desired perisitence file size
+
Fragment sums: 9bfe23577651c88dcfb78c76ac3a28a5c53eead4561e3bdc5921b8b2e748
start making USB
+
Fragment count: 20
exit from running USB and then boot New USB you just created!
+
Press [Esc] to abort check.
 +
Checking: 100.0%
   −
This method  installs soas-3-20091228.iso to a live USB Stick
+
The media check is complete, the result is: PASS.
   −
Thus you do not need to use the same version that is on the Installer USB
+
It is OK to use this media.
 +
Copying live image to target device.
 +
squashfs.img
 +
    630,784,000 100%    1.96MB/s    0:05:06 (xfr#1, to-chk=0/1)
 +
osmin.img
 +
          8,192 100%    0.00kB/s    0:00:00 (xfr#1, to-chk=0/1)
 +
Updating boot config file
 +
Initializing persistent overlay file
 +
500+0 records in
 +
500+0 records out
 +
524288000 bytes (524 MB) copied, 216.717 s, 2.4 MB/s
 +
Initializing persistent /home
 +
800+0 records in
 +
800+0 records out
 +
838860800 bytes (839 MB) copied, 344.643 s, 2.4 MB/s
 +
Formatting unencrypted /home
 +
mke2fs 1.42.8 (20-Jun-2013)
 +
Filesystem label=
 +
OS type: Linux
 +
Block size=4096 (log=2)
 +
Fragment size=4096 (log=2)
 +
Stride=0 blocks, Stripe width=0 blocks
 +
51296 inodes, 204800 blocks
 +
10240 blocks (5.00%) reserved for the super user
 +
First data block=0
 +
Maximum filesystem blocks=209715200
 +
7 block groups
 +
32768 blocks per group, 32768 fragments per group
 +
7328 inodes per group
 +
Superblock backups stored on blocks:
 +
32768, 98304, 163840
   −
'''Note: You cannot use a downloaded xxxxx.iso with this Installer USB as liveusb-creator cannot see it when running from sugar terminal.'''
+
Allocating group tables: done                           
 +
Writing inode tables: done                           
 +
Creating journal (4096 blocks): done
 +
Writing superblocks and filesystem accounting information: done
 +
 
 +
tune2fs 1.42.8 (20-Jun-2013)
 +
Setting maximal mount count to -1
 +
Setting interval between checks to 0 seconds
 +
Installing boot loader
 +
Target device is now set up with a Live image!
 +
</pre>
    
== What's next? ==
 
== What's next? ==
   −
After you've created your stick, it's time to [[Sugar_on_a_Stick#Boot|boot your stick]] and [[Sugar on a Stick/Getting Involved | test]] it out.  Please also [[Sugar on a Stick/Getting Involved/Testing | report]] your observations.
+
After you've created your stick, it's time to [[Sugar on a Stick/Boot|boot your stick]] and [[Sugar on a Stick/Getting Involved | test]] it out.  Please also [[Sugar on a Stick/Getting Involved/Testing | report]] your observations.
 
  −
[[Category:HowTo]]
 

Navigation menu