Sugar on a Stick/Linux/Installation

From Sugar Labs
< Sugar on a Stick‎ | Linux
Revision as of 11:23, 2 May 2019 by FGrose (talk | contribs) (update terminal listing examples for sudo df -Th and sudo blkid)
Jump to navigation Jump to search

These are the steps for installing Sugar on a Stick on a USB/SD device.

This page is transcluded to various installation instruction pages.

  1. Download the latest Sugar on a Stick .iso file.

  2. Prepare: (with root user permissions at a terminal or console command line)
    • Create a mount point directory: mkdir /run/soas
    • Mount the .iso file to make it accessible as a disk: mount /path/to/downloaded.iso /run/soas/
      (Where /path/to/downloaded.iso is the filesystem path, or fully specified name, of the downloaded .iso file.)
      This is the source for the installation, and must remain mounted until the installation is complete.
    • Insert a USB stick of 2 GB or greater capacity into your computer.
    • With root user permissions at a terminal or console command line, use the command sudo df -Th or sudo blkid to get the USB device node name.
    • (Items in angle brackets, such as <MyAccount> are descriptive placeholders.)
       You should see something like the following:
      [<user>@<system> <working directory>]$ sudo df -Th
      Filesystem     Type      Size  Used Avail Use% Mounted on
      devtmpfs       devtmpfs   16G     0   16G   0% /dev
      tmpfs          tmpfs      16G   33M   16G   1% /dev/shm
      tmpfs          tmpfs      16G  1.8M   16G   1% /run
      tmpfs          tmpfs      16G     0   16G   0% /sys/fs/cgroup
      /dev/sda1      ext4      123G   17G  100G  15% /
      tmpfs          tmpfs      16G   80K   16G   1% /tmp
      tmpfs          tmpfs     3.2G   10M  3.2G   1% /run/user/1000
      /dev/sdb1      vfat      233G   90G  143G  39% /run/media/<MyAccount>/<filesystem label>
      /dev/loop0     iso9660   942M  942M     0 100% /run/soas
      (The /run/media/<MyAccount>/ path is the standard mount point for removable media.
      /media/<MyMountPoint> is common on other operating systems.)
      [<user>@<system> <working directory>]$ sudo blkid
      /dev/sda1: LABEL="Fedora30" UUID="dddf4ae0-e1fd-43c3-bacc-91acbafb3a34" TYPE="ext4" PARTUUID="000b2340-03"
      /dev/sdb1: LABEL_FATBOOT="Fat" LABEL="Fat" UUID="D082-05E1" TYPE="vfat" PARTLABEL="Fat" PARTUUID="53132329-808c-4a44-adf6-e98ad17546ff"
      /dev/loop0: UUID="2019-04-26-02-18-05-00" LABEL="Fedora-SoaS-Live-30-1-2" TYPE="iso9660" PTUUID="37f2045d" PTTYPE="dos"
      (Additional disk drive partitions may be listed on your computer.)
      The mount point (Mounted on), Filesystem, Size, and LABEL should help you identify what you want.
    • Unmount the USB device filesystem:
      umount /run/media/<MyAccount>/<MyUSBdiscMountPoint>
      (The /run/media/<MyAccount>/ path is the standard mount point. Other operating systems may use /media/<MyMountPoint>.)
    • (You should have the isomd5sum package installed so that the following installation script can verify the download.)

  3. Load: Execute the following installation command, as the root user, in one command line with many options:
    /run/soas/LiveOS/livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 500 --unencrypted-home /path/to/downloaded.iso /dev/sd?1
    The '?' in the final parameter represents the target USB device scsi drive node, such as sdb1 or sdc1, etc., and /path/to/downloaded.iso is the location and name of the .iso file.
    The operating system will occupy ~960 MB, and the overlay and home size arguments, 500 and 500, were selected to fit in a 2 GB device. These may be adjusted depending on your preferences and device capacity (see LiveOS image). On a 4 GB device, one might use 1000 and 1600 for the size arguments.
     The installation transcript should look something like the following:
    [<user>@<system> <working directory>]$ sudo livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 500 --unencrypted-home /<path to>/Fedora-SoaS-Live-x86_64-29-1.2.iso /dev/sdc1
    Verifying image...
    /<path to>/Fedora-SoaS-Live-x86_64-29-1.2.iso:   7641738bb0493f4a521af3a694e4f4ae
    Fragment sums: 7c5f6e26254ca7438da4d5b28a72a9f38711e3bb34b2748e177533ef5c25
    Fragment count: 20
    Supported ISO: no
    Press [Esc] to abort check.
    Checking: 100.0%
    The media check is complete, the result is: PASS.
    It is OK to use this media.
    Copying LiveOS image to target device...
        905,187,328 100%  374.66MB/s    0:00:02 (xfr#1, to-chk=0/1)
    Syncing filesystem writes to disc.
        Please wait, this may take a while...
    Setting up /EFI/BOOT
    Updating boot config files.
    Initializing persistent overlay...
    500+0 records in
    500+0 records out
    524288000 bytes (524 MB, 500 MiB) copied, 0.448825 s, 1.2 GB/s
    Initializing persistent /home
    500+0 records in
    500+0 records out
    524288000 bytes (524 MB, 500 MiB) copied, 0.415686 s, 1.3 GB/s
    Formatting unencrypted home.img
    mke2fs 1.44.3 (10-July-2018)
    Creating filesystem with 512000 1k blocks and 128016 inodes
    Filesystem UUID: 8fc0d8be-5c67-46a8-b621-6bd62bad3267
    Superblock backups stored on blocks: 
    	8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409
    Allocating group tables: done                            
    Writing inode tables: done                            
    Creating journal (8192 blocks): done
    Writing superblocks and filesystem accounting information: done 
    tune2fs 1.44.3 (10-July-2018)
    Setting maximal mount count to -1
    Setting interval between checks to 0 seconds
    Installing boot loader...
    Target device is now set up with a Live image!

  4. Boot: Insert the USB stick into a bootable USB port on your computer. Set the option to "boot from USB" in your computer's BIOS setup, and then start up the computer.

  • To create more Sugar Sticks on other 2 GB or greater USB or SD devices, while running Sugar on a Stick, one may run the Terminal Activity, and execute this command as the root user:
    livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 500 --delete-home --unencrypted-home /run/initramfs/livedev /dev/sd?1
Replace /dev/sd?1 with a new device node for the second USB/SD device that you want to load with Sugar on a Stick.