12,355
edits
Changes
Jump to navigation
Jump to search
mLine 33:
Line 33: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
The Undiscoverable/Collaboration (view source)
Revision as of 00:41, 24 July 2011
, 00:41, 24 July 2011→Telepathy-salut vs Telepathy-gabble
*Technical: Jabber setup
*Technical: Jabber setup
: [[The Server/Prosody]]
: [[The Server/Prosody]]
==Ad-Hoc and Mesh Networking==
*Collaboration on Ad-hoc Networking must be initiated by XO-1.5 when connecting to an XO-1
::Mesh Networking:
(Re: [Testing] [OLPC New Zealand] os873 on XO-1.5 and os873 on XO-1 -07/15/2011) testing@lists.laptop.org 07/18/2011 -Samuel Greenfield
XO-1.5's do not have Mesh networking support, so they use 802.11 Ad-hoc
networks. XO-1's default to Mesh networks at the moment for compatibility,
because that is what they historically have done.
Once an XO-1.5 starts an Ad-hoc network, the XO-1's will spot that network
within a minute or two, and use the same Mayan numeral as the XO-1.5 to
indicate its presence. If all the XOs leave an Ad-hoc network it
disappears; but Network Manager/Sugar cache its presence for a while in case
a scan accidentally missed a network.
When an XO-1 sees an Ad-hoc networks they are all filled in as "occupied",
because an XO-1 does not show the unfilled variants to allow an XO-1 to
start them.
This behavior has been around since OLPC build 10.1.3 (860) & Sugar 0.90,
and is described at http://wiki.sugarlabs.org/go/Features/Ad_hoc_Networking
I believe XO-1's can be adjusted to default to Ad-hoc as well if desired
*Enable Ad-hoc network on XO-1
(Re: [Testing] [OLPC New Zealand] os873 on XO-1.5 and os873 on XO-1 -07/23/2011) -Gary Martin
1) You can enable ad-hoc networking on recent XO-1 builds with (your neighbour hood view will be populated with the three new Mayan numbered adhoc icons as well as the usual three mesh icons):
gconftool-2 -s /desktop/sugar/network/adhoc -t bool true
2) Unfortunately I am not aware of current builds properly supporting disabling
(e.g. a gconf setting would be nice) mesh network on XO-1 hardware…
There was talk and some patches floating about, but I'm not sure anything landed.
The closest seems to be the below terminal command, but it does not survive a power cycle, or sleep/wake cycle :
( Maybe there is some power script this could be added to for folks who want to disable mesh permanently (until we get something more elegant in place for the future)?
su
echo 0 > /sys/class/net/eth0/lbs_mesh
== Telepathy-salut vs Telepathy-gabble==
*07/23/2011 IRC:#sugar
<silbe> Sugar will use link-local collaboration (telepathy-salut), using multicast on the LAN (e.g. wifi).
If a Jabber server is configured, Sugar will try to connect to it (using telepathy-gabble).
As soon as the Jabber connection has been established, Sugar will deactivate the link-local collaboration.