Difference between revisions of "Deployment Platform/XO reference distribution"
Jump to navigation
Jump to search
(Created page with "== Summary == This is one of possible reference implementations of Harmonic Distribution based solutions. The goal is creating Sugar ...") |
(→Try) |
||
Line 27: | Line 27: | ||
* Type the command <code>'''reboot'''</code> followed by [[File:Key_enter.jpg|50px]] (enter) | * Type the command <code>'''reboot'''</code> followed by [[File:Key_enter.jpg|50px]] (enter) | ||
* The XO will reboot and take you to the naming and color choice process | * The XO will reboot and take you to the naming and color choice process | ||
+ | |||
+ | == Downstreams == | ||
+ | |||
+ | The list of solutions based on this reference implementation: | ||
+ | |||
+ | * [http://pe.sugarlabs.org/go/Proyecto_Piloto_Hexoquinasa Hexokinase]. |
Revision as of 12:37, 14 August 2012
Summary
This is one of possible reference implementations of Harmonic Distribution based solutions. The goal is creating Sugar based downstream distribution to run on OLPC XO laptops.
Try
To try reference implementation on an XO laptop, download one of prebuilt images and proceed below instructions to flash it. Note that images were built using recent development version of software. So, images might be used to easily test recent changes.
XO-1
- First, ensure that your laptop is unlocked.
- Download xo.img and xo.crc files to the root directory of a USB stick or SD card.
- Drop to the "ok" prompt by pressing
(Esc) repeatedly during boot.
- Type the command:
copy-nand u:\xo.img
for a USB stick orcopy-nand sd:\xo.img
for a SD card followed by(enter).
- Wait for the display to fill in with color and the "ok" prompt to return
- Type the command
reboot
followed by(enter)
- The XO will reboot, finish writing, reboot itself, and take you to the naming and color choice process
- During the reboots, keep the charger connected to allow OFW to self-update
XO-1.5
- First, ensure that your laptop is unlocked.
- Download xo.zd to the root directory of a USB stick
- Drop to the "ok" prompt by pressing
(Esc) repeatedly during boot
- Type the command:
fs-update u:\xo.zd
followed by(enter)
- Wait for the display to fill in with color and the "ok" prompt to return
- Type the command
reboot
followed by(enter)
- The XO will reboot and take you to the naming and color choice process
Downstreams
The list of solutions based on this reference implementation: