0.102/Testing: Difference between revisions

Line 33:

* SD images for XO-1 [http://dev.laptop.org/~gonzalo/0.102/41002SL0.zd 41002SL0.zd] ([http://dev.laptop.org/~gonzalo/0.102/41002SL0.zd.md5]) ('''UPLOADING''')

== Installing ==

These images are NOT signed by OLPC, therefore you need an unsecured XO for installing these images. To save some time, you can use [https://github.com/jmcmullen/olpc-teacher-update this tool].

=== XO-1 ===

* Copy the file 41002SL0.img and the file 41002SL0.crc in a USB device.

* Boot your XO with the USB device and the charger connected.

* Go to the ok prompt (At boot time, briefly type the Escape key (top left on the XO keyboard, with a white X in a black disc) when you hear the startup jingle. Do not hold it down. In a few seconds, the FORTH ok prompt appears, along with a hint on help.)

* Type

copy-nand u:\41002SL0.img

* when flashing finished, you will get the prompt again, type reboot

=== XO-1.5, XO-1.75 and XO-4 ===

* Copy the file 41002SLx.zd in a USB device. (Every model have a different x number, check below)

* Boot your XO with the USB device and the charger connected.

* Go to the ok prompt (At boot time, briefly type the Escape key (top left on the XO keyboard, with a white X in a black disc) when you hear the startup jingle. Do not hold it down. In a few seconds, the FORTH ok prompt appears, along with a hint on help.)

* Type

fs-update u:\41002SLx.zd

* when flashing finished, you will get the prompt again, type reboot

=== About the SD images for XO-1 ===

@@ Line 33: / Line 33: @@
 * SD images for XO-1 [http://dev.laptop.org/~gonzalo/0.102/41002SL0.zd 41002SL0.zd] ([http://dev.laptop.org/~gonzalo/0.102/41002SL0.zd.md5]) ('''UPLOADING''')
+== Installing ==
 These images are NOT signed by OLPC, therefore you need an unsecured XO for installing these images. To save some time, you can use [https://github.com/jmcmullen/olpc-teacher-update this tool].
+=== XO-1 ===
+* Copy the file 41002SL0.img and the file 41002SL0.crc in a USB device.
+* Boot your XO with the USB device and the charger connected.
+* Go to the ok prompt (At boot time, briefly type the Escape key (top left on the XO keyboard, with a white X in a black disc) when you hear the startup jingle. Do not hold it down. In a few seconds, the FORTH ok prompt appears, along with a hint on help.)
+* Type
+  copy-nand u:\41002SL0.img
+* when flashing finished, you will get the prompt again, type reboot
+=== XO-1.5, XO-1.75 and XO-4 ===
+* Copy the file 41002SLx.zd in a USB device. (Every model have a different x number, check below)
+* Boot your XO with the USB device and the charger connected.
+* Go to the ok prompt (At boot time, briefly type the Escape key (top left on the XO keyboard, with a white X in a black disc) when you hear the startup jingle. Do not hold it down. In a few seconds, the FORTH ok prompt appears, along with a hint on help.)
+* Type
+  fs-update u:\41002SLx.zd
+* when flashing finished, you will get the prompt again, type reboot
 === About the SD images for XO-1 ===