Debian/Raspberry Pi

Download

Rishabh Thaney has made a build for Raspberry Pi using Debian;

2017-06-26-rpi3-stretch.img.zip at Sugar Labs.
2017-06-26-rpi3-stretch.img.zip on Google Drive,

See also: GSoC 2017 Project Ideas by Sugar Labs, GSoC 2017 Proposal by Rishabh, and GSoC 2017 Blog by Rishabh.

Testing

Report issues to https://github.com/sugarlabs/rpi23-gen-image

Select "sugar" in top right bar at login.

2017-06-26

Home View (F3 key).

Comparison

Please also compare against the Fedora 26 SoaS image, as it has many more working activities.

Fedora SoaS does not include wireless firmware, see the FAQ for a fix.

2017-07-02

Suggested Installation

Using Fedora Media Writer

download Fedora-SoaS-armhfp-26-1.3-sda.raw.xz
select and extract
start Fedora Media Writer (FMW)
select "Custom"
select Fedora-SoaS-armhfp-26-1.3-sda.raw
Insert micro SD in Mini Card Reader and insert in USB port
Choose rpi3 from drop-down in FMW
Write micro SD
Insert in rpi3 slot and power up

Fedora-SoaS-armhfp-26-1.3-sda.raw.xz at Fedora Project.

Home View (F3 key).

Neighborhood View (F1 key).

My Settings, Network, Collaboration Server was set to jabber.sugarlabs.org before this screenshot. The default in Sugar 0.110 is not to use jabber.sugarlabs.org unless configured.

Reproducing

This was reproduced on Debian stretch platform which was set up in an schroot shell on Ubuntu.

Setup Schroot

Set up a schroot environment like this:

Install the schroot and debootstrap packages,

sudo apt install schroot debootstrap

Create the stretch filesystem,

sudo mkdir -p /srv/chroot/stretch
sudo debootstrap stretch /srv/chroot/stretch

Make a file /etc/schroot/chroot.d/stretch,

[stretch]
type=directory
personality=linux
directory=/srv/chroot/stretch

Log into your schroot shell from the terminal,

sudo schroot -c stretch

See https://wiki.debian.org/Schroot for alternate methods.

Setup Builder

Setup the builder within the schroot shell like this;

Clone the repository

git clone https://github.com/sugarlabs/rpi23-gen-image

Install dependencies by going through the README.md file and executing the commands described,

Run Builder

Change your directory to the cloned repo and run this command to start the building process:

sh rpi23-gen-image.sh

This takes some time as the scripts start downloading and configuring packages to build an image.

Once the process is complete in the terminal, navigate to this directory:

~/rpi23-gen-image/images/stretch

to find the image that was built.

Some changes have been made to the original repo: https://github.com/drtyhlpr/rpi23-gen-image which can be viewed in the commit history.