1,286
edits
Changes
rather than link to schroot wiki page (which changes), include minimal instructions here
== 2017-06-22 ==
== 2017-06-26 ==
Sucrose images for the Raspberry Pi 3 can be created by using this fork repository:
Sucrose images for the Raspberry Pi 3 can be created by using this fork repository:
This was tested on Debian ''stretch'' platform which was set up in an ''schroot'' shell on Ubuntu.
This was tested on Debian ''stretch'' platform which was set up in an ''schroot'' shell on Ubuntu.
=== Setup Schroot ===
Set up a ''schroot'' environment like this:
* Install the ''schroot'' and ''debootstrap'' packages,
sudo apt install schroot debootstrap
* Create the ''stretch'' filesystem,
sudo mkdir -p /srv/chroot/stretch
sudo debootstrap stretch /srv/chroot/stretch
* Make a file /etc/schroot/chroot.d/stretch,
[stretch]
type=directory
personality=linux
directory=/srv/chroot/stretch
* Log into your ''schroot'' shell from the terminal,
* Log into your ''schroot'' shell from the terminal,
sudo schroot -c test
sudo schroot -c stretch
See https://wiki.debian.org/Schroot for alternate methods.
=== Setup Builder ===
Setup the builder within the ''schroot'' shell like this;
* Clone the repository
* Clone the repository
git clone <nowiki>https://github.com/Rishabh42/rpi23-gen-image</nowiki>
git clone <nowiki>https://github.com/Rishabh42/rpi23-gen-image</nowiki>
* Install dependencies by going through the readme file in the repo and executing the commands described,
* Install dependencies by going through the readme file in the repo and executing the commands described,
=== Run Builder ===
* Change your directory to the cloned repo and run this command to start the building process:
* Change your directory to the cloned repo and run this command to start the building process:
sh rpi23-gen-image.sh
sh rpi23-gen-image.sh