Changes

  sudo make -f Makefile.build install

  sudo make -f Makefile.build install

NB:Of course, if you do not have the packages of the order wget, to install them by the order “yum install wget”

NB: Of course, if you do not have the packages of the program [[wikipedia:Wget| wget]], install them by the command “yum install wget”

Next:

Next:

  wget http://dev.laptop.org/~cjb/rawhide-xo/livecd-iso-to-xo.sh

  wget http://download.sugarlabs.org/soas/releases/livecd-iso-to-disk.sh

  wget {{SoaS-2 path}}

  wget {{SoaS release path}}

run this command (or something similar depending on the version number of your .iso file)

run this command (or something similar depending on the version number of your .iso file)

  sudo sh livecd-iso-to-xo.sh {{SoaS-2 image}} Soas.img

  sudo sh livecd-iso-to-xo.sh {{SoaS release image}} Soas.img

and then copy Soas.img and Soas.crc to a USB key or SD card

and then copy Soas.img and Soas.crc to a USB key or SD card

* You must hold down the XO-1's '''✓''' ("check") gamepad key during boot, otherwise boot will hang at the gray "XO" logo.  You should see dots appear under the USB flash drive icon indicating the XO is booting from that drive.

* You must hold down the XO-1's '''✓''' ("check") gamepad key during boot, otherwise boot will hang at the gray "XO" logo.  You should see dots appear under the USB flash drive icon indicating the XO is booting from that drive.

* SoaS-2 images are based on Fedora "Rawhide" spins; [[olpc:Rawhide-XO]] describes many of the known issues running these on an XO-1.

* SoaS images are based on Fedora "Rawhide" spins; [[olpc:Rawhide-XO]] describes many of the known issues running these on an XO-1.

* Also make sure you got a dev-key before booting with the SoaS using the check button..

* Also make sure you got a dev-key before booting with the SoaS using the check button..