525
edits
Changes
Jump to navigation
Jump to search
Line 19:
Line 19: − + + + + + + + + + + + + + +
Features/WPA-WPA2-Enterprise-Network-Connections/Testing (view source)
Revision as of 09:20, 14 December 2011
, 09:20, 14 December 2011no edit summary
* Note that, you may only need to enter the "Radius Server IP Address" ("192.168.1.3" in the screenshot). The "Radius Server Port", and "Share Secret" are the default ones (at least for a default setup of freeradius).
* Note that, you may only need to enter the "Radius Server IP Address" ("192.168.1.3" in the screenshot). The "Radius Server Port", and "Share Secret" are the default ones (at least for a default setup of freeradius).
== TESTING - TTLS-based authentication ==
== Connecting a client - TLS-based authentication ==
* Make sure you have three certificates - user-certificate, ca-certificate, private-key - before you proceed. One way to get these certificates is as follows:
** Go to the RADIUS server machine, and navigate to "/etc/raddb/certs"
** Run the following commands
*** sudo make client.pem
*** sudo chmod 0644 client.p12
*** sudo chmod 0644 ca.pem
*** Transfer "client.p12" and "ca.pem" to a USB drive.
*** Use this USB drive, in the subsequent steps.
* Navigate to the "Neighbourhood view" on the XO.
* Click on the network-icon, and enter the parameters, as seen in the following screenshot
** [[File:TLS_authentication.png]]
== Connecting a client - TTLS-based authentication ==
* Navigate to the "Neighbourhood view" on the XO.
* Navigate to the "Neighbourhood view" on the XO.
* Click on the network-icon, and enter the parameters, as seen in the following screenshot (thanks to Anish, for showing me this minimal configuration)
* Click on the network-icon, and enter the parameters, as seen in the following screenshot (thanks to Anish, for showing me this minimal configuration)
** [[File:TTLS_authentication.png]]
** [[File:TTLS_authentication.png]]