Debian/Raspberry Pi: Difference between revisions

Retrieved from "https://wiki.sugarlabs.org/go/Debian/Raspberry_Pi"

@@ Line 1: / Line 1: @@
- Sucrose images for the Raspberry pi 3 can be created by using this repository: <nowiki>https://github.com/Rishabh42/rpi23-gen-image</nowiki>
+== Download ==
- This fork was tested on Debian stretch platform which was set up in an schroot shell.
- The method is described as follows:
-. Set up an schroot environment by following the instructions on this page: <nowiki>https://wiki.debian.org/Schroot</nowiki> and replacing "wheezy" with "stretch" in the instructions to install Debian stretch which is crucial to build images using this repo.
-. Log into your schroot shell from the terminal.
-. Clone the  <nowiki>https://github.com/Rishabh42/rpi23-gen-image</nowiki> repository.
-. Build dependencies by going through the readme file in the repo and executing the commands described.
-. Change your directory to the cloned repo and run this command to start the building process: "sh rpi23-gen-image.sh", without quotes. This step takes some time as the scripts start downloading and configuring   packages to build an image.
-. Once the proces is complete in the terminal, navigate to this directory: ~/rpi23-gen-image/images/stretch to find the image that was built.
-  Some changes have been made to the original repo found here: <nowiki>https://github.com/drtyhlpr/rpi23-gen-image</nowiki> which can be viewed in the commit history of the fork mentioned above.
+Rishabh Thaney has made builds for Raspberry Pi using Debian;
+* [https://people.sugarlabs.org/rishabh/ https://people.sugarlabs.org/rishabh/],
+See also:
+* [[Summer_of_Code/2017|GSoC 2017 Project Ideas]] by Sugar Labs,
+* [[Summer_of_Code/Rishabh_Thaney|GSoC 2017 Proposal]] by Rishabh, and;
+* [https://sugaronraspberrypi.wordpress.com/ GSoC 2017 Blog] by Rishabh.
+== Testing ==
+Starts at color gender age home view as user "pi",
+wireless works; showing ad-hoc and wireless Access points.
+Home View (F3 key) screenshot:
+[[File:Screenshot_of_"Home".png | 700px | 600px]]
+Does not auto-mount an inserted USB.
+== Reproducing ==
+This was reproduced on Debian ''stretch'' platform which was set up in an ''schroot'' shell on Ubuntu.
+=== Setup Schroot ===
+Set up a ''schroot'' environment like this:
+* Install the ''schroot'' and ''debootstrap'' packages,
+ sudo apt install schroot debootstrap
+* Create the ''stretch'' filesystem,
+ sudo mkdir -p /srv/chroot/stretch
+ sudo debootstrap stretch /srv/chroot/stretch
+* Make a file /etc/schroot/chroot.d/stretch,
+ [stretch]
+ type=directory
+ personality=linux
+ directory=/srv/chroot/stretch
+* Log into your ''schroot'' shell from the terminal,
+ sudo schroot -c stretch
+See https://wiki.debian.org/Schroot for alternate methods.
+=== Setup Builder ===
+Setup the builder within the ''schroot'' shell like this;
+* Clone the repository
+  git clone <nowiki>https://github.com/sugarlabs/rpi23-gen-image</nowiki>
+* Install dependencies by going through the README.md file and executing the commands described,
+=== Run Builder ===
+* Change your directory to the cloned repo and run this command to start the building process:
+ sh rpi23-gen-image.sh
+This takes some time as the scripts start downloading and configuring packages to build an image.
+* Once the process is complete in the terminal, navigate to this directory:
+ ~/rpi23-gen-image/images/stretch
+to find the image that was built.
+Some changes have been made to the original repo: <nowiki>https://github.com/drtyhlpr/rpi23-gen-image</nowiki> which can be viewed in the commit history.