Difference between revisions of "Activities/Classroom Broadcast"
Tonyforster (talk | contribs) |
m (moved Activities/ClassroomBroadcast to Activities/Classroom Broadcast: no Camelcase so searches are possible) |
(No difference)
|
Revision as of 18:39, 25 November 2011
TBD
Description
ClassroomBroadcast transmits the screen of the 'server' laptop to the screens of a number of 'client' laptops. Typically the teacher's laptop would be the server and the students' laptops the clients. ClassroomBroadcast is a low cost alternative to using a data projector. ClassroomBroadcast runs on the server laptop and a VNC client such as TigerVNC runs on the client laptops.
Installing
Install ClassroomBroadcast on the 'server' laptop from http://activities.sugarlabs.org/addon/4507
ClassroomBroadcast also requires some additional software - x11vnc
To install x11vnc enter the following in Terminal:
sudo yum install x11vnc
Install a VNC client on all the client laptops, in Terminal enter:
sudo yum install vnc
Running
Check that all laptops are connected to the same network. Start ClassroomBroadcast on the server laptop. Press the button in the centre of the screen and note the IP address below the button.
Start the VNC client on the client laptops by entering the following in Terminal
vncviewer
Enter the IP address from the server into the dialog box.
The screen of the sending laptop is mirrored on the receiving laptops. It takes a few seconds for the screens to update.
To stop transmitting, click the centre screen button in ClassroomBroadcast. ClassroomBroadcast can be closed like any regular Sugar Activity. When you are finished with the clients, you can close them by clicking the X in the screen upper right which returns you to Terminal. Terminal can then be closed like any regular Sugar Activity.