12,355
edits
Changes
Jump to navigation
Jump to search
mLine 267:
Line 267: + Line 274:
Line 275: + + + + + + + + + + + + + +
→Centos 7.2 install on NUC 6i3
*Intel NUC kit NUC6i3SYH
*Intel NUC kit NUC6i3SYH
*Patriot Signature Line 16GB (2x8GB) DDR4 PCA-17000 2133MHZ CL15 SODIMM Kit
*Patriot Signature Line 16GB (2x8GB) DDR4 PCA-17000 2133MHZ CL15 SODIMM Kit
:NOTE; '''requires a HDMI cable with full size connectors at both ends.'''
*need to do these updates:
*need to do these updates:
:is required is to download the firmware for then AC8260 (1), and copy it to /lib/firmware.
:is required is to download the firmware for then AC8260 (1), and copy it to /lib/firmware.
: http://www.intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000005511.html
: http://www.intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000005511.html
:3) Supported Memory:
: http://www.intel.com/content/www/us/en/support/boards-and-kits/intel-nuc-kits/000016245.html
==Installation Notes==
*Bios Update
: select non efi settings (uncheck) in f2 Setup booted with no Hard Drive or USB attached
: Save and reboot
: Insert USB with Bios Update; Boot to f2 Bios; Press f7 and select USB file.
: Wait for Update to Complete.
*Shut down
: Insert Hard Drive (Note 4 Phillips screws the hold HD holder must be loosened to insert HD); Re tighten.
* Reboot f10 select HD
* Used a working pre-installed XSCE Centos 7.2 HD from older D54250WYKH NUC i5
: Boot works and starts Centos and logs in
==Meeting Notes 03/31/2016==
==Meeting Notes 03/31/2016==