12,355
edits
Changes
Jump to navigation
Jump to search
mLine 282:
Line 282: + − + − *Shut down − * Reboot f10 select HD + − * Used a working pre-installed XSCE Centos 7.2 HD from older D54250WYKH NUC i5+ − + − + + + + + + +
→160407_centos_7.2_nuc6i3.img: eiting
==Installation Notes==
==Installation Notes==
*Bios Update
*Bios Update
: select non efi settings (uncheck) in f2 Setup booted with no Hard Drive or USB attached
: select non efi settings (uncheck efi[ ]) in f2 Setup booted with no Hard Drive or USB attached
: Save and shutdown
: Save and shutdown
: Insert USB [1] with Bios Update; Boot to f2 Bios; Press f7 and select USB file.
: Insert USB [1] with Bios Update; Boot to f2 Bios; Press f7 and select USB file.
: Wait for Update to Complete.
: Wait for Update to Complete.
: Insert Hard Drive (Note 4 Phillips screws that hold HD holder must be loosened to insert HD); Re tighten.
: Insert Hard Drive (Note 4 Phillips screws that hold HD holder must be loosened to insert HD); Re tighten.
:: Be sure to extract the SY0039.BIO and iwlwifi-8000-ucode-25.30.13.0 before copying to USB
===160407_centos_7.2_nuc6i3.img===
: Boot works and starts Centos and logs in
:http://download.unleashkids.org/xsce/downloads/160407_centos_7.2_nuc6i3.img
:[1] Be sure to extract the SY0039.BIO and iwlwifi-8000-ucode-25.30.13.0 before copying to USB
*dd to a USB or use gnome-disks restore to install to a > 4 GB USB
:Boot USB (f10 boot menu)
:wait until installer asks to select "erase"
*select "erase"
*installer completes
::pswd (your password)
::pswd xsce-admin (your password)
==Meeting Notes 03/31/2016==
==Meeting Notes 03/31/2016==