Difference between revisions of "Testing/Reports/livecd-iso-to-disk"

From Sugar Labs
Jump to navigation Jump to search
Line 170: Line 170:
 
  Installing boot loader
 
  Installing boot loader
 
  Target device is now set up with a Live image!
 
  Target device is now set up with a Live image!
−
 
−
===Fedora-17-Beta-TC1-i686-Live-Desktop===
 
−
::Download link:http://dl.fedoraproject.org/pub/alt/stage/17-Beta.TC1/Live/i686/Fedora-17-Beta-TC1-i686-Live-Desktop.iso
 
−
* TC2 Live Desktop is not available--[[User:Satellit|Satellit]] 04:45, 21 March 2012 (EDT)
 
−
*Set the '''tools_livecd-iso-to-disk.sh''' script as executable (Properties)
 
−
::Download link: http://bit.ly/livecd-iso-to-disk
 
−
====USB Stick====
 
−
*EMTEC 4 GB
 
−
:'''Fat 16; boot flag set'''
 
−
:NOTE: use diskutility to unmount /dev/sdg1
 
−
:home 700 due to larger desktop live image
 
−
*'''DO NOT TRY TO UPDATE''' Update is too large and will fill up disk
 
−
 
−
====Command====
 
−
*/dev/sd(x)1    '''(x)''' is the device name: enter mount in terminal to what it is. eg: /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sdg1  '''be sure to add the partition number (1) to command'''
 
−
sudo ./tools_livecd-iso-to-disk.sh --reset-mbr --overlay-size-mb 500 --home-size-mb 700 --delete-home --unencrypted-home Fedora-17-Alpha-RC4-i686-Live-Desktop.iso /dev/sd(x)1
 
−
 
−
====Transcript====
 
−
:~/Desktop$  sudo ./tools_livecd-iso-to-disk.sh --reset-mbr --overlay-size-mb 500 --home-size-mb 900 --delete-home --unencrypted-home Fedora-17-Beta-TC1-i686-Live-Desktop.iso /dev/sd(x)1
 
−
[sudo] password for(user:
 
−
Verifying image...
 
−
./tools_livecd-iso-to-disk.sh: line 806: checkisomd5: command not found
 
−
Are you SURE you want to continue?
 
−
Press Enter to continue or ctrl-c to abort
 
−
 
−
There are differences between boot sector and its backup.
 
−
Differences: (offset:original/backup)
 
−
  71:54/20, 72:43/20, 73:31/20, 74:2d/20, 75:44/20, 76:45/20, 77:53/20
 
−
  , 78:4b/20, 79:54/20, 80:4f/20, 81:50/20
 
−
  Not automatically fixing this.
 
−
Copying live image to target device.
 
−
squashfs.img
 
−
    654290944 100%    6.33MB/s    0:01:38 (xfer#1, to-check=0/1)
 
−
 
−
sent 654370889 bytes  received 31 bytes  6643359.59 bytes/sec
 
−
total size is 654290944  speedup is 1.00
 
−
osmin.img
 
−
        8192 100%    0.00kB/s    0:00:00 (xfer#1, to-check=0/1)
 
−
 
−
sent 8265 bytes  received 31 bytes  16592.00 bytes/sec
 
−
total size is 8192  speedup is 0.99
 
−
Updating boot config file
 
−
Initializing persistent overlay file
 
−
500+0 records in
 
−
500+0 records out
 
−
524288000 bytes (524 MB) copied, 89.3586 s, 5.9 MB/s
 
−
Initializing persistent /home
 
−
900+0 records in
 
−
900+0 records out
 
−
943718400 bytes (944 MB) copied, 222.15 s, 4.2 MB/s
 
−
Formatting unencrypted /home
 
−
mke2fs 1.41.11 (14-Mar-2010)
 
−
Filesystem label=
 
−
OS type: Linux
 
−
Block size=4096 (log=2)
 
−
Fragment size=4096 (log=2)
 
−
Stride=0 blocks, Stripe width=0 blocks
 
−
57600 inodes, 230400 blocks
 
−
11520 blocks (5.00%) reserved for the super user
 
−
First data block=0
 
−
Maximum filesystem blocks=239075328
 
−
8 block groups
 
−
32768 blocks per group, 32768 fragments per group
 
−
7200 inodes per group
 
−
Superblock backups stored on blocks:
 
−
32768, 98304, 163840, 229376
 
−
 
−
Writing inode tables: done                           
 
−
Creating journal (4096 blocks): done
 
−
Writing superblocks and filesystem accounting information: done
 
−
 
−
This filesystem will be automatically checked every 30 mounts or
 
−
180 days, whichever comes first.  Use tune2fs -c or -i to override.
 
−
tune2fs 1.41.11 (14-Mar-2010)
 
−
Setting maximal mount count to -1
 
−
Setting interval between checks to 0 seconds
 
−
Installing boot loader
 
−
Target device is now set up with a Live image!
 
−
:~/Desktop$
 

Revision as of 21:23, 9 December 2016


Note USB must be prepared first

  • use gparted: make new MBR/ format as fat / boot flag set / label="LIVE"

Fedora-KDE-Live-x86_64-25-1.3.iso

[root@localhost Downloads]# livecd-iso-to-disk --format --efi --overlay-size-mb 300 --home-size-mb 175 --delete-home --unencrypted-home Fedora-KDE-Live-x86_64-25-1.3.iso /dev/sdc
Verifying image...
/home/satellit/Downloads/Fedora-KDE-Live-x86_64-25-1.3.iso:   f840eea2674b3a3e21c6c563546eaa5f
Fragment sums: 1044b689b78896fc5e5d13ae42c77c75e5b7aa2eb436be1e179c7927ac2f
Fragment count: 20
Supported ISO: no
Press [Esc] to abort check.
Checking: 100.0%

The media check is complete, the result is: PASS.

It is OK to use this media.
WARNING: THIS WILL DESTROY ANY DATA ON /dev/sdc!!!
Press Enter to continue or ctrl-c to abort

/dev/sdc: 2 bytes were erased at offset 0x000001fe (dos): 55 aa
/dev/sdc: calling ioctl to re-read partition table: Success
Waiting for devices to settle...
mkfs.fat 4.0 (2016-05-06)
Copying live image to target device.
squashfs.img
  1,319,231,488 100%  281.89MB/s    0:00:04 (xfr#1, to-chk=0/1)
Setting up /EFI/BOOT
Updating boot config file
Initializing persistent overlay file
300+0 records in
300+0 records out
314572800 bytes (315 MB, 300 MiB) copied, 0.297588 s, 1.1 GB/s
Initializing persistent /home
175+0 records in
175+0 records out
183500800 bytes (184 MB, 175 MiB) copied, 0.157262 s, 1.2 GB/s
Formatting unencrypted /home
mke2fs 1.43.3 (04-Sep-2016)
Creating filesystem with 179200 1k blocks and 44880 inodes
Filesystem UUID: e953f0e8-2a2c-4598-a69c-9cc7a056a512
Superblock backups stored on blocks: 
	8193, 24577, 40961, 57345, 73729

Allocating group tables: done                            
Writing inode tables: done                            
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done 

tune2fs 1.43.3 (04-Sep-2016)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Installing boot loader
Target device is now set up with a Live image!
[root@localhost Downloads]#

f18 x86-64 Fedora-18-x86_64-Live-SoaS Li-t-d Install to USB

Installed in fedora 18
yum install livecd-tools
Tutorial How to make a Soas.img file

f17 x86_64 Beta DVD Installer USB

all of the following were built in ubuntu - thus difference in commands
  • Note this USB will install to a HD from install repo in USB with no network required
creates 2 partitions;
  • /dev/sdb1 LIVE
LiveOS
syslinux
  • /dev/sdb2 LIVE-REPO
Fedora-17-Beta-x86_64-DVD.iso
  • 4 GB USB formatted as fat with 750 MB /dev/sdb1 partition fat; boot flag; label= LIVE - balance of USB unformatted
# ./tools_livecd-iso-to-disk.sh --format --reset-mbr Fedora-17-Beta-x86_64-DVD.iso /dev/sdb1
Verifying image...
./tools_livecd-iso-to-disk.sh: line 900: checkisomd5: command not found
Are you SURE you want to continue?
Press Enter to continue or ctrl-c to abort

/Packages found, will copy source .iso to target
WARNING: THIS WILL DESTROY ANY DATA ON /dev/sdb!!!
Press Enter to continue or ctrl-c to abort

wipefs: WARNING: /dev/sdb: appears to contain 'gpt' partition table
Waiting for devices to settle...
mkdosfs 3.0.9 (31 Jan 2010)
mkdosfs 3.0.9 (31 Jan 2010)
Copying live image to target device.
squashfs.img
   130367488 100%   20.36MB/s    0:00:06 (xfer#1, to-check=0/1)

sent 130383477 bytes  received 31 bytes  20059001.23 bytes/sec
total size is 130367488  speedup is 1.00
Copying /home/(user)/Desktop/Fedora-17-Beta-x86_64-DVD.iso
Fedora-17-Beta-x86_64-DVD.iso
  2484076544 100%   10.41MB/s    0:03:47 (xfer#1, to-check=0/1)

sent 2484379867 bytes  received 31 bytes  10920351.20 bytes/sec
total size is 2484076544  speedup is 1.00
Updating boot config file
Installing boot loader
Target device is now set up with a Live image!
#

EFI-USB-Fedora-17-Beta-x86-64-Live Soas

  • Boots MacBook Pro i7

Transcript

Root terminal
  • ./tools_livecd-iso-to-disk.sh --format --efi --overlay-size-mb 300 --home-size-mb 175 --delete-home --unencrypted-home Fedora-17-Beta-x86_64-Live-SoaS.iso /dev/sdb1
Verifying image...
./tools_livecd-iso-to-disk.sh: line 900: checkisomd5: command not found
Are you SURE you want to continue?
Press Enter to continue or ctrl-c to abort

WARNING: THIS WILL DESTROY ANY DATA ON /dev/sdb!!!
Press Enter to continue or ctrl-c to abort

wipefs: WARNING: /dev/sdb: appears to contain 'gpt' partition table
Waiting for devices to settle...
mkdosfs 3.0.9 (31 Jan 2010)
Copying live image to target device.
squashfs.img
   500154368 100%    5.90MB/s    0:01:20 (xfer#1, to-check=0/1)

sent 500215497 bytes  received 31 bytes  6137613.84 bytes/sec
total size is 500154368  speedup is 1.00
osmin.img
        8192 100%    0.00kB/s    0:00:00 (xfer#1, to-check=0/1)

sent 8265 bytes  received 31 bytes  16592.00 bytes/sec
total size is 8192  speedup is 0.99
Updating boot config file
Initializing persistent overlay file
300+0 records in
300+0 records out
314572800 bytes (315 MB) copied, 71.4079 s, 4.4 MB/s
Initializing persistent /home
175+0 records in
175+0 records out
183500800 bytes (184 MB) copied, 35.3457 s, 5.2 MB/s
Formatting unencrypted /home
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
44880 inodes, 179200 blocks
8960 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67371008
22 block groups
8192 blocks per group, 8192 fragments per group
2040 inodes per group
Superblock backups stored on blocks: 
	8193, 24577, 40961, 57345, 73729

Writing inode tables: done                            
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
 
This filesystem will be automatically checked every 31 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
tune2fs 1.41.14 (22-Dec-2010)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Installing boot loader
Target device is now set up with a Live image!
Retrieved from "https://wiki.sugarlabs.org/index.php?title=Testing/Reports/livecd-iso-to-disk&oldid=99541"