Difference between revisions of "Development Team/Arduino"

From Sugar Labs
Jump to navigation Jump to search
m
Line 15: Line 15:
 
  echo ""
 
  echo ""
 
  cd Arduino.7/
 
  cd Arduino.7/
  ./Arduino.sh.
+
  ./Arduino.sh
  
  

Revision as of 14:44, 22 December 2009

There are different options to connect your arduino board to Sugar (trough sugar-capable activities)


Squeak

Thanks to the great work found on Gira

We can download an squeak project and install it on our Sugar. This script can help in the process.

#/bin/bash
echo "Downloading.."
echo ""
curl -o Arduino.zip  http://tecnodacta.com.ar/gira/Arduino.7.zip
unzip Arduino.zip
echo "Executing.."
echo ""
cd Arduino.7/
./Arduino.sh


Note that on an XO laptop you have to tweak some your Arduino.sh script in these or similar ways

#!/bin/sh
APP=`dirname $0`
EXE="$APP/Contents/Linux686"
RES="$APP/Contents/Resources"
exec "/usr/bin/squeak" \
-plugins "$EXE" \
-encoding latin1 \
-vm-display-X11  \
"$RES/Arduino.2.image"


Installation and use procedure

Having executed our initiation script we have an squeak project with essential particularities in order to run our Arduino. Inside Electronics flaps we can find different tools.

But first we have to connect our arduino board, this is done in the following way,


  • 1) Connect the board to the USB port.
  • 2) If the board doesn't have Firmata we have to upload it form Arduino IDE.

Firmata1.png

  • 3) To find out the serial port to which the board belongs we can go to Tools->Serial Port of a list we can always find the following:
/dev/ttyUSB0
/dev/ttyS0


  • 4) Get an "Arduino board" from the Electronics flap, open its halo by right-clicking it, then open the Viewer by clicking the button that looks like an eye, and then find "arduino - connection" category

Arduinoconection.png

  • 5) Select the desired port (i.e. "/dev/ttyUSB0")

Select-port.3.png

  • 6) Execute "Arduino board - connect"

ArduinoConnect.png


  • 7) Wait more or less two seconds an then the slot "is connected" have to change to true.


  • 8) After searching "arduino - digital pins mode" category and resetting the value of "arduino board - is reading digital pins" (going from false to true). That's how the digital inputs are set.

True-falsedigitalpins.png


  • 9) Now we are ready to use it!.

Hypercubo1.png




Turtle Art

The code needed is located at (Thnks to Sayamindu Dasgupta)

TODO: Link to an XO bundle.

This uses the same firmata protocol that the arduino-squeak connection uses.

Some use examples and Screenshots