Debian/Raspberry Pi
2017-06-26
Sucrose images for the Raspberry Pi 3 can be created by using this fork repository:
This was tested on Debian stretch platform which was set up in an schroot shell on Ubuntu.
Setup Schroot
Set up a schroot environment like this:
- Install the schroot and debootstrap packages,
sudo apt install schroot debootstrap
- Create the stretch filesystem,
sudo mkdir -p /srv/chroot/stretch sudo debootstrap stretch /srv/chroot/stretch
- Make a file /etc/schroot/chroot.d/stretch,
[stretch] type=directory personality=linux directory=/srv/chroot/stretch
- Log into your schroot shell from the terminal,
sudo schroot -c stretch
See https://wiki.debian.org/Schroot for alternate methods.
Setup Builder
Setup the builder within the schroot shell like this;
- Clone the repository
git clone https://github.com/Rishabh42/rpi23-gen-image
- Install dependencies by going through the readme file in the repo and executing the commands described,
Run Builder
- Change your directory to the cloned repo and run this command to start the building process:
sh rpi23-gen-image.sh
This takes some time as the scripts start downloading and configuring packages to build an image.
- Once the process is complete in the terminal, navigate to this directory:
~/rpi23-gen-image/images/stretch
to find the image that was built.
Some changes have been made to the original repo: https://github.com/drtyhlpr/rpi23-gen-image which can be viewed in the commit history of the fork mentioned above.
2017-06-21
Sugar on RPI image
This image can be considered still in beta. This is not the final build.
Here is the link : Download
with wifi 2017-06-26-rpi3-stretch.img.zip - note select "sugar"in top right bar at login
Repository : here
Fork used: here
If the image does not work on the first boot (or fails to login), please restart your RPI and try again. --HrishiP (talk) 10:49, 21 June 2017 (IST)