Sugar on a Stick/Installation/OLPC

english | español | français HowTo [ID# 20728] 



Do you have an OLPC XO-1?

OLPCXO.png

There are three main options for OLPC XO users: (1) olpc-update; (2) install Sugar on a Stick on the internal NAND; and (3) Sugar on a Stick on an SD card.

Update to the latest Sugar build

You run olpc-update from the Terminal activity, e.g.,:

sudo olpc-update 767

where 767 is the latest stable release from OLPC (OLPC 8.2, Sugar 0.82)

Details regarding the 8.2.1 release will be available in late March or early April.

More details can be found here.

Install the Sugar on a Stick image

(Requires a developer key for your OLPC-XO-1 and access to a Fedora, Debian, or Ubuntu box.)

WARNING: this will overwrite all data on your OLPC-XO-1 NAND!!

On a Fedora10 system:

sudo yum -y install crcimg mtd-utils

On Debian or Ubuntu:

sudo apt-get install mtd-utils
crcimg is not packaged for Debian (that I am aware of), so you'll have to build it:
wget http://dev.laptop.org/~mstone/releases/SOURCES/crcimg-1.1.tar.bz2
tar xvf crcimg-1.1.tar.bz2
sudo make -f Makefile.build install

Next:

wget http://dev.laptop.org/~cjb/rawhide-xo/livecd-iso-to-xo.sh
wget Template:SoaSiso

run this command (or something similar depending on the version number of your .iso file)

sudo sh livecd-iso-to-xo.sh Soas-200903051021.iso Soas-200903051021.img

and then copy Soas-200903051021.img and Soas-200903051021.crc to a USB key or SD card

On the OLPC-XO-1, boot with the USB key plugged in and the four game keys press to get to the OK prompt in Open Firmware (OFW).

Type the following commands:

disable-security
copy-nand u:\Soas-200903051021.img

Note: depending upon the file system on your USB key, the names maybe truncated:

dir u:\
copy-nand u:\SOAS-2~1.img

You should see an animation of the blocks being written to the NAND. When it is complete, you will be back at the OK prompt. Type:

reboot

and the OLPC-XO-1 will reboot and you should be running Sugar 0.84.

Run Sugar on a Stick from an SD card or external USB

Details coming soon (Requires a developer key for your OLPC-XO-1)

Follow the instructions below, but rather than using copy-nand, use livecd-iso-to-disk.

On Fedora:

sudo yum install livecd-tools
sudo livecd-iso-to-disk --format --xo --xo-no-home 20090217.iso /dev/sdX1



back to downloads page