525
edits
Changes
Jump to navigation
Jump to search
Line 12:
Line 12: + + + + Line 24:
Line 28: + + + + Line 46:
Line 54: + + + + + +
Features/WPA-WPA2-Enterprise-Network-Connections/Testing (view source)
Revision as of 10:33, 14 December 2011
, 10:33, 14 December 2011no edit summary
* Start the server, by issuing the following command
* Start the server, by issuing the following command
** sudo /usr/sbin/radiusd -X &
** sudo /usr/sbin/radiusd -X &
* Note that, you may only need to enter the "Radius Server IP Address" ("192.168.1.3" in the screenshot). The "Radius Server Port", and "Share Secret" are the default ones (at least for a default setup of freeradius).
* Note that, you may only need to enter the "Radius Server IP Address" ("192.168.1.3" in the screenshot). The "Radius Server Port", and "Share Secret" are the default ones (at least for a default setup of freeradius).
** If either of "User Certificate", or "Private Key" is in ".p12" format, both these entries should be EXACTLY equal, since the ".p12" certificate contains both.
** If either of "User Certificate", or "Private Key" is in ".p12" format, both these entries should be EXACTLY equal, since the ".p12" certificate contains both.
** For entering the "User certificate", "CA certificate" and "Private Key", you will be taken to the "Journal-Chooser". You may use the certificates that were retrieved earlier.
** For entering the "User certificate", "CA certificate" and "Private Key", you will be taken to the "Journal-Chooser". You may use the certificates that were retrieved earlier.
== Connecting a client - TTLS-based authentication ==
== Connecting a client - TTLS-based authentication ==