12,355
edits
Changes
Jump to navigation
Jump to search
Line 596:
Line 596: − − ======SD Card Install====== − *http://scotland.proximity.on.ca/arm-nightlies/vault/f17arm-latest-armhfp-trimslice-mmcblk0.img.xz − This is a Fedora 17 Hard Float Trimslice Image suitable for writing to an SD card and placed in the Trimslice's Full Size SD slot (Front slot) − and booting without further modification. − Write with xzcat file.xz > /dev/mmcblkX, put in the device, and you're ready to go. Boots to a serial console. − − Most of the SD card images can be used with a USB storage device drive using the following method: − Write the image to both the USB storage device and an SD card. IE, write the image using xzcat file.xz > /dev/sdX then xzcat file.xz > /dev/mmcblkX. − Once written, use a partition editor such as fdisk to delete the VFAT partition from the USB drive and the Linux partition from SD card. − Plug the SD and USB storage into your ARM device and power up. − The ARM system will load any applicable bootloader pieces, kernel, and initramfs from the SD card, but use the USB storage for the root filesystem. − − Nearly images are self-sufficient, but a kernel tarball is optionally available with the contents of the image's /boot and /lib/modules directories. − These can be used in conjunction with the tarball root filesystems to create your own images.
Sugar Creation Kit/sck/Advanced Topics (view source)
Revision as of 12:18, 11 July 2017
, 12:18, 11 July 2017→SD Card Install: remove
:works in intel PC's
:works in intel PC's
*livecd-tools does not work
*livecd-tools does not work
=====Resizer=====
=====Resizer=====