2,486
edits
Changes
Jump to navigation
Jump to search
Line 19:
Line 19: − +
Activities/Turtle Art/Using Turtle Art Sensors (view source)
Revision as of 16:30, 6 March 2011
, 16:30, 6 March 2011→Specifications
For the XO1, the addition of a 150k ohm series resistor would (I expect, no guarantee) give a reduced sensitivity in voltage mode (0-4V) but allow inputs to +- 100V without damage. Input impedance in resistance, volume and pitch modes is much lower but a 1k ohm series resistor should still allow inputs to +-12V.
For the XO1, the addition of a 150k ohm series resistor would (I expect, no guarantee) give a reduced sensitivity in voltage mode (0-4V) but allow inputs to +- 100V without damage. Input impedance in resistance, volume and pitch modes is much lower but a 1k ohm series resistor should still allow inputs to +-12V.
If applying an external voltage to the XO1, it is highly recommended that test leads be made up with a microphone plug and an inbuilt series resistor. 680 ohms is the suggested resistor value, it gives a reasonable input range while still allowing the use of the full resistance range of the XO1.
<b>If applying an external voltage to the XO1, it is highly recommended that test leads be made up with a microphone plug and an inbuilt series resistor. 680 ohms is the suggested resistor value, it gives a reasonable input range while still allowing the use of the full resistance range of the XO1.</b>
[[File:Audio 680 ohm.jpg]]
[[File:Audio 680 ohm.jpg]]