Fedora 32

Revision as of 12:13, 25 September 2019 by Satellit (talk | contribs) (→‎references)

Fedora.jpg Fedora® version page: 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 |
Fedora and the Infinity design logo are trademarks of Red Hat, Inc.

some of the older versions listed here ^ may be security risks- for archive purposes only

Fedora 32

Fedora 32 Rawhide

  • updated Sept/21/2019

Fedora Docs

https://docs.fedoraproject.org/en-US/docs/
PAGE UNDER CONSTRUCTION

Rawhide

sugar 0.14 installs with fedora media writer usb to hard disk

Rpi

Note there is no rpi4 support at this time

Raspberry_Pi

"Fedora supports the the Raspberry Pi Model 2B and 3-series of devices including the 3B, 3B+, 3A+, 3CM and 3CM+ in Fedora 29 and later releases."

https://wiki.sugarlabs.org/go/Sugar_Creation_Kit/sck/Advanced_Topics#Raspberry_Pi_.2F_RPi (old work)
https://wiki.cdot.senecacollege.ca/wiki/Raspberry_Pi_Fedora_Remix_Installation
https://www.raspberrypi.org/downloads/
http://pidora.ca/
https://elinux.org/RPi_Distributions#Fedora_Remix
https://fedoraproject.org/wiki/QA:Testcase_Virt_ARM_on_x86 (install arm in VMM)

Rpi-FAQ

Installation method used for testing
  1. Download Fedora-SoaS-armhfp..sda.raw.xz file to /Downloads
  2. extract here to expand to Fedora-SoaS-armhfp..sda.raw.xz file
  3. start Fedora Media Writer/select Fedora-SoaS-armhfp..sda.raw file in "Custom"
  4. insert micro SD into usb Card Reader and plug in it's USB
  5. select RPiB3+ and write Fedora-SoaS-armhfp..sda.raw.xz file
  6. exit Fedora MediaWriter
  7. start gparted and expand partition 3 to full size of micro SD (Class 10 32 GB)
  8. insert mico SD in RPi3B+ slot and power up.

Fedora MediaWriter

"What changes when Rpi 3B+;Rpi2B+; or "other is selected in version 4.1.4.1-fc30 ?"

  • satellit May 19, 2019

"Nothing, really. The tentative plan was to support more ARM spins in the future but no work towards that was done yet."

  • Martin Bříza:5/20/2019

Raspberry-Pi-IIAB

https://www.youtube.com/channel/UC0cBGCxr_WPBPa3IqPVEe3g

Install of IIAB on RPi4

"The Raspberry Pi 4 is the latest upgrade in the Raspberry Pi SBC series. : This one has a Quadcore A72 CPU, up to 4 GB of LPDDR4 RAM, 2x USB 2.0, 2x USB 3.0 ports, double micro-HDMI ports, AC Wifi, Bluetooth 5.0 and Gigabit ethernet."

  • NOTE medium and full install include sugarizer-server (default)
https://sugarizer.org/
https://github.com/llaske/sugarizer
https://github.com/llaske/sugarizer-server
Aug 6 2017
  • Same install on a 32GB sd: using my Rpi3B+.
  • Only difference: used medium install and only downloaded a few items to test

Aug 2 2017
Installed "Raspbian Buster with desktop and recommended software" (1)
2019-07-10-raspbian-buster-full.img (extracted: 6.4 GB)
256 GB SanDisk Ultra micoSDXC A1 card

Install with Etcher:

In microSD reader
Insert card in RPi4 and power up:
  • RPi4 (with 4 GB Memory) booted and changed GPU memory in "Preferences / Raspberry Pi4 Configuration" to [356] from [76]
( 2019-07-10-raspbian-buster-full - allows changing the allocated amount of memory in the RPi4)
(This appears to increase performance)

 

  • in add/remove software: install firefox ESR
  • in terminal:
 curl d.iiab.io/install.txt | sudo bash
  • chose maximum iiab install size
  • used middle selection for type of install (single point)
  • Start Ansible install

Photograph terminal screen when it shows: "Internet-In-A Box (IIAB) software install is complete"

 

Reboot (by hitting [enter] key)
  • Change iiab-admin's password before connecting your server to the Internet.
You can do this within http://box.lan/admin -> Utilities menu — or at the command line, if you type "passwd iiab-admin". 
  • in firefox enter (in command line): 10.0.0.208/admin with user:iiab-admin and the password you entered above ^
Starts Admin console

 

  • test setup ^

(1) http://wiki.laptop.org/go/IIAB/FAQ#Is_a_quick_installation_possible.3F

NOTES

references

https://fedoraproject.org/wiki/QA:Testcase_Virt_ARM_on_x8
https://npmccallum.gitlab.io/post/cross-architecture-roots-with-dnf/

GCI

https://codein.withgoogle.com/