There are two ways to use Sugar on your own computer. SOAS (Sugar on a Stick) is a USB flash drive with Sugar which can be booted on your computer but does not change anything on your hard drive. The second way is to free some space on your hard drive and install a distribution of GNU/Linux which supports Sugar. The method allows you to choose your normal operating system or GNU/Linux with Sugar during boot.
Sugar on a Stick
MS Windows
|
|
- Download the latest Sugar on a Stick .iso file.
- Load: Insert a USB flash drive (or SD Card) with 2 GB or more of free space into your computer and launch Rufus to create a Sugar-on-a-Stick bootable image.
- Boot: Insert the USB stick into a USB port on your computer. Set the option to "boot from USB" in your computer's BIOS setup, and then start up the computer.
|
GNU/Linux
|
- Download the latest Sugar on a Stick .iso file.
- Load:
Here is a simple way to create a SOAS usb flash drive.
- Open a shell (command line interpreter)
- Type
df -Th. This shows all of the mounted partitions (on your computer's hard drive.)
- Insert a USB flash drive (or SD Card) with 2 GB or more of free space into your computer
- After a few moment type
df -Th again. You should see an added line for your USB drive. Check the size of the drive (e.g. 3.7GB for a 4GB drive) and its type: vfat to confirm this line refers to your usb flash drive. The first field on this line, e.g. /dev/sdb1, identifies the partition. For dd command, you will use /dev/sdb [this field without the partition number].
- type
cd ~/Downloads. Then type ls Fedora*.iso Assuming you downloaded to the Downloads folder, this will show the SOAS iso.
- Type
sudo dd if=Fedora-SoaS-Live-x86_64-25-1.3.iso of=/dev/sdb bs=1M with the correct if (input file) and of (output device). The dd command erases the 'of' device so make sure it doesn't say /dev/sda which would erase your computer's hard drive!!! Also make sure you have saved any valuable information on the usb flash drive.
- Boot: Insert the USB stick into a bootable USB port on your computer. Set the option to "boot from USB" in your computer's BIOS setup, and then start up the computer.
|
Apple Mac OS X
|
- Download the latest Sugar on a Stick .iso file.
- Load:
Here is a simple way to load a bootable USB on a Mac.
- Enter the Terminal:
/Applications/Utilities/Terminal.
- Type
diskutil list. You should see all the disk drives you have inserted into your computer.
- Insert the disk drive to which you want to write Sugar on a Stick.
- Type
diskutil list again. You should see that your USB drive has been added to the list. If not, wait a while and repeat.
- Type
hdiutil convert -format UDRW -o <Sugar on a Stick image file>.img <Sugar on a Stick image file> to convert the image into a bootable format.
- Type
sudo diskutil unmountDisk <device name> to unmount the disk (it will not be ejected).
- Type
sudo dd if=<Sugar on a Stick image file>.img.dmg of=<device name> bs=1m. sudo will ask for your password, and then dd will start writing the disk file.
- When
dd finishes writing the disk file, type sudo diskutil eject <device name>.
- Boot: Insert the USB stick into a USB port on your computer, then reboot and press and hold the Option key while rebooting. You should see a list of all the EFI-recognizable USB drives that can be bootstrapped. If Sugar on a Stick is not one such drive, it cannot be bootstrapped: you need rEFInd (a fork of rEFIt).
|
Note
SOAS sticks created with Windows or GNU/Linux can be booted on PC computers. SOAS sticks created using an Apple computer can be booted on an Apple computer.
Installing Sugar on your computer's hard drive
