Debian/Raspberry Pi
2017-06-26
Sucrose images for the Raspberry Pi 3 can be created by using this fork repository:
This was tested on Debian stretch platform which was set up in an schroot shell on Ubuntu.
Setup Schroot
Set up a schroot environment like this:
- Install the schroot and debootstrap packages,
sudo apt install schroot debootstrap
- Create the stretch filesystem,
sudo mkdir -p /srv/chroot/stretch sudo debootstrap stretch /srv/chroot/stretch
- Make a file /etc/schroot/chroot.d/stretch,
[stretch] type=directory personality=linux directory=/srv/chroot/stretch
- Log into your schroot shell from the terminal,
sudo schroot -c stretch
See https://wiki.debian.org/Schroot for alternate methods.
Setup Builder
Setup the builder within the schroot shell like this;
- Clone the repository
git clone https://github.com/Rishabh42/rpi23-gen-image
- Install dependencies by going through the readme file in the repo and executing the commands described,
Run Builder
- Change your directory to the cloned repo and run this command to start the building process:
sh rpi23-gen-image.sh
This takes some time as the scripts start downloading and configuring packages to build an image.
- Once the process is complete in the terminal, navigate to this directory:
~/rpi23-gen-image/images/stretch
to find the image that was built.
Some changes have been made to the original repo: https://github.com/drtyhlpr/rpi23-gen-image which can be viewed in the commit history of the fork mentioned above.
Sugar on RPI image
This image can be considered still in beta. This is not the final build.
Here is the link :
- Google 2017-06-20-rpi3-stretch.img.zip
Latest image with wifi - note select "sugar"in top right bar at login
Repository : here
Fork used: here
If the image does not work on the first boot (or fails to login), please restart your RPI and try again. --HrishiP (talk) 10:49, 21 June 2017 (IST)
- initial screen f3
Sugar graphic Tutorials
- features of the sugar interface