Sugar on a Stick/Linux/Installation

From Sugar Labs
< Sugar on a Stick‎ | Linux
Revision as of 01:16, 19 December 2018 by FGrose (talk | contribs) (update to SoaS 29 details)
Jump to navigation Jump to search

These are the steps for installing Sugar on a Stick on a USB/SD device.

This page is transcluded to various installation instruction pages.

  1. Download the latest Sugar on a Stick .iso file.
  2. Install the livecd-tools package to obtain the installation script and the SYSLINUX boot loader. Use this command to obtain the installer: sudo dnf install livecd-tools
  3. Insert a USB stick of 2 GB or greater capacity into your computer.
  4. With root user permissions at a terminal or console command line, use the command sudo df -Th or sudo blkid to get the USB device node name.
    5. (Items in angle brackets, such as <MyAccount> are descriptive placeholders.)
     You should see something like the following: 
    [<user>@<system> <working directory>]$ sudo df -Th
Filesystem     Type      Size  Used Avail Use% Mounted on
rootfs         rootfs     20G  5.5G   14G  29% /
devtmpfs       devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     1.6G  788K  1.6G   1% /dev/shm
tmpfs          tmpfs     1.6G  1.3M  1.6G   1% /run
tmpfs          tmpfs     1.6G     0  1.6G   0% /sys/fs/cgroup
tmpfs          tmpfs     1.6G     0  1.6G   0% /media
/dev/loop0     iso9660   959M  959M     0 100% /run/soas
/dev/sdc1      vfat      2.0G  2.0G   53M  98% /run/media/<MyAccount>/<filesystem label>/
    (The /run/media/<MyAccount>/ path is the standard mount point for removable media.
    /media/<MyMountPoint> is common on other operating systems.)
    [<user>@<system> <working directory>]$ sudo blkid
/dev/sda1: LABEL="Fedora29" UUID="45e12f4a-51f2-463e-a33b-a6c0f157ab77" TYPE="ext4" PARTUUID="000b2340-04" 
/dev/sdc1: LABEL="LIVE" UUID="D2AC-5056" TYPE="vfat"  PARTUUID="000056b3-01" 
/dev/loop0: UUID="2018-10-25-00-02-47-00" LABEL="Fedora-SoaS-Live-29-1-2" TYPE="iso9660" PTUUID="3299e5ae" PTTYPE="dos"
    (Additional disk drive partitions may be listed on your computer.)
    The mount point (Mounted on), Filesystem, Size, and LABEL should help you identify what you want.
  5. Unmount the USB device filesystem:
    umount /run/media/<MyAccount>/<MyUSBdiscMountPoint>
    (The /run/media/<MyAccount>/ path is the standard mount point. Other operating systems may use /media/<MyMountPoint>.)
  6. (You should have the isomd5sum package installed so that the following installation script can verify the download.)

  7. Load: Execute the following installation command, as the root user, in one command line with many options:
    livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 500 --unencrypted-home /path/to/downloaded.iso /dev/sd?1
    The '?' in the final parameter represents the target USB device scsi drive node, such as sdb1 or sdc1, etc., and /path/to/downloaded.iso is the location and name of the .iso file.
    The operating system will occupy ~960 MB, and the overlay and home size arguments, 500 and 500, were selected to fit in a 2 GB device. These may be adjusted depending on your preferences and device capacity (see LiveOS image). On a 4 GB device, one might use 1000 and 1600 for the size arguments.
     The installation transcript should look something like the following: 
    [<user>@<system> <working directory>]$ sudo livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 500 --unencrypted-home /<path to>/Fedora-SoaS-Live-x86_64-29-1.2.iso /dev/sdc1
Verifying image...
/<path to>/Fedora-SoaS-Live-x86_64-29-1.2.iso:   7641738bb0493f4a521af3a694e4f4ae
Fragment sums: 7c5f6e26254ca7438da4d5b28a72a9f38711e3bb34b2748e177533ef5c25
Fragment count: 20
Supported ISO: no
Press [Esc] to abort check.
Checking: 100.0%

The media check is complete, the result is: PASS.

It is OK to use this media.

Copying LiveOS image to target device...
squashfs.img
    905,187,328 100%  374.66MB/s    0:00:02 (xfr#1, to-chk=0/1)

Syncing filesystem writes to disc.
    Please wait, this may take a while...
Setting up /EFI/BOOT
Updating boot config files.
Initializing persistent overlay...
500+0 records in
500+0 records out
524288000 bytes (524 MB, 500 MiB) copied, 0.448825 s, 1.2 GB/s
Initializing persistent /home
500+0 records in
500+0 records out
524288000 bytes (524 MB, 500 MiB) copied, 0.415686 s, 1.3 GB/s
Formatting unencrypted home.img
mke2fs 1.44.3 (10-July-2018)
Creating filesystem with 512000 1k blocks and 128016 inodes
Filesystem UUID: 8fc0d8be-5c67-46a8-b621-6bd62bad3267
Superblock backups stored on blocks: 
	8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409

Allocating group tables: done                            
Writing inode tables: done                            
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done 

tune2fs 1.44.3 (10-July-2018)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Installing boot loader...
Target device is now set up with a Live image!

  8. Boot: Insert the USB stick into a bootable USB port on your computer. Set the option to "boot from USB" in your computer's BIOS setup, and then start up the computer.

  • To create more Sugar Sticks on other 2 GB or greater USB or SD devices, while running Sugar on a Stick, one may run the Terminal Activity, and execute this command as the root user:
    livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 500 --delete-home --unencrypted-home /run/initramfs/livedev /dev/sd?1
Replace /dev/sd?1 with a new device node for the second USB/SD device that you want to load with Sugar on a Stick.
Retrieved from "https://wiki.sugarlabs.org/index.php?title=Sugar_on_a_Stick/Linux/Installation&oldid=102583"