Features/WPA-WPA2-Enterprise-Network-Connections/Testing

Setting up a RADIUS server (on a dedicated machine)

• Install "freeradius" rpm package
  • sudo yum install freeradius
• Modify "/etc/raddb/clients.conf", to include the name of the network access-point/router. Sample files are present at
  • Media:original_clients.doc
  • Media:modified_clients.doc
  • Media:diff_clients.doc.
• Modify "/etc/raddb/users", to configure a username-password pair for authentication. Sample files are present at
  • Media:original_users.doc
  • Media:modified_users.doc
  • Media:diff_users.doc
• Start the server, by issuing the following command
  • sudo /usr/sbin/radiusd -X &

Setting up the access-point / router

• Connect the access-point/router, with the RADIUS server machine, through a ethernet cable.
• Through the RADIUS server machine, open the browser, type in the access-point/router IP address, and configure it for WPA/WPA2-Enterprise authentication. A sample screenshot is presented below
  •