Difference between revisions of "Sugar on a Stick/Linux"

From Sugar Labs
Jump to navigation Jump to search
(UNETbootin does not support the preferred home.img filesystem and or replication of images from installed images.)
 
(20 intermediate revisions by 4 users not shown)
Line 3: Line 3:
 
</noinclude>
 
</noinclude>
 
== Introduction ==
 
== Introduction ==
−
This page provides additional detail for installing '''[[Sugar on a Stick/Mango Lassi|Mango Lassi]]''', the most stable, released version of Sugar on a Stick (SoaS), available at [http://spins.fedoraproject.org/soas/#downloads this download site], onto a USB/SD flash storage device using GNU/Linux.
 
  
−
: To explore a variety of '''experimental''' options for putting a [[What is Sugar?|Sugar]] image on a USB or SD flash drive under GNU/Linux, see the following pages:
+
The page [[Sugar on a Stick/Linux/Installation]] provides up-to-date and concise instructions for loading  the most recent released version of [[Sugar on a Stick]] (SoaS) onto a USB/SD flash storage device using GNU/Linux.
 +
 
 +
==livecd-iso-to-disk tool==
 +
 
 +
Before experimenting beyond the instructions in the link above, please read [[fedora:How to create and use Live USB]] for more background details. That page starts with Direct Write methods of creating a (non-persistent) Live USB system, and further down the page describes using the livecd-iso-to-disk tool which is the prefered method of making persistent Sugar on a Stick.
 +
 
 +
The reader should be aware that Ubuntu/Debian use a method to create a live USB system which is fundamentally different to Fedora's method, used by Sugar.
 +
 
 +
:''Quote from the above Fedora page''
 +
 
 +
: '''Issues using other Linux distributions'''
 +
 
 +
: Ubuntu and derivative Linux distributions have a usb-creator program similar to Live USB Creator. This does not work with Fedora ISO images, it silently rejects them. usb-creator requires the ISO to have a Debian layout, with a /.disk/info file and a casper directory. Do not attempt to use this utility to write a Fedora ISO image.
 +
 
 +
: The livecd-iso-to-disk script is not meant to be run from a non-Fedora system. Even if it happens to run and write a stick apparently successfully from some other distribution, the stick may well fail to boot. Use of livecd-iso-to-disk on any distribution other than Fedora is unsupported and not expected to work: please use an alternative method, such as the "direct write" methods described above.
 +
:''end Quote''
 +
 
 +
=== Persistence ===
 +
Persistence in the context of a live USB system, is the ability to save both system changes, including Software updates, and the user's work between sessions, that is after shutdown and reboot.
 +
 
 +
==Linux users, suggested methods ==
 +
 
 +
Linux users might consider reading the following pages for supported methods to install SoaS.
 +
 
 +
'''Users of Fedora and Red Hat derivitives:'''
 +
:[[Sugar on a Stick/Linux/Installation]]
 +
 
 +
'''Debian, Ubuntu, and derivitives, and other distros:'''
 +
 
 +
:Make your SoaS from within a Sugar Live OS environment, which is itself a Fedora system.
 +
 
 +
: '''Either''' Burn a Sugar.iso and follow the section of [[Sugar on a Stick/Installation]] entitled
 +
 
 +
:: "1. Burn a CD-ROM disc, boot from it, then run the script, ''livecd-iso-to-disk''"
 +
 
 +
: '''or''' create a Sugar image by dd or any of the methods on [[ Testing/Reports/Sugar_on_a_Stick_Persistence|this page]]. Then boot into the Live OS, to create SoaS from the running Live OS image.
  
−
: [[Sugar on a Stick/Beta|SoaS test builds]] | [[Sugar on a Stick/Installation/OLPC|OLPC XO-1]] | [[Sugar on a Stick/Linux/openSUSE|openSUSE]] | [[Trisquel On A Sugar Toast|Trisquel]] | [[VirtualBox]] | [[VMware]] | [[Sugar on a Stick/Linux/Non-compressed Fedora|non-compressed Fedora]] | [[:Category:Live USB|Live USB: (all known portable Sugar distributions)]]
 
  
 
If you have questions, trouble, or feedback, please let us know on the [[{{TALKPAGENAMEE}}|discussion]] page. If you can improve these instructions, please edit the page and do so!
 
If you have questions, trouble, or feedback, please let us know on the [[{{TALKPAGENAMEE}}|discussion]] page. If you can improve these instructions, please edit the page and do so!
−
* See this reference for more background details: [[fedora:How to create and use Live USB#Graphical Method - Windows or Fedora]]
 
  
−
== Put SoaS onto a stick using Fedora or Ubuntu ==
+
==Experimental==
 +
 
 +
To explore a variety of experimental options for putting a [[What is Sugar?|Sugar]] image on a USB or SD flash drive under GNU/Linux, see the following pages:
 +
 
 +
[[Sugar on a Stick/Beta|SoaS test builds]] | [[Sugar on a Stick/Installation/OLPC|OLPC XO-1]] | [[Sugar on a Stick/Linux/openSUSE|openSUSE]] | [[Trisquel On A Sugar Toast|Trisquel]] | [[VirtualBox]] | [[VMware]] | [[Sugar on a Stick/Linux/Non-compressed Fedora|non-compressed Fedora]] | [[:Category:Live USB|Live USB: (all known portable Sugar distributions)]]
 +
 
 +
=== Load SoaS further insight ===
  
−
This is known to work in Fedora and Ubuntu.
+
This is known to work in Fedora and has been reported to work in Ubuntu.
  
 
First, download a SoaS {{Code|.iso}} image from  http://spins.fedoraproject.org/soas/#downloads, then return here.
 
First, download a SoaS {{Code|.iso}} image from  http://spins.fedoraproject.org/soas/#downloads, then return here.
Line 23: Line 61:
 
:*''[[wikipedia:md5sum|isomd5sum]]'' is needed for the recommended verification step, which checks that the .iso file is complete after its travels. If there is a problem with the .iso file, the script will exit and provide a failure message.  The verification step can be bypassed by using the <code>--noverify</code> option.
 
:*''[[wikipedia:md5sum|isomd5sum]]'' is needed for the recommended verification step, which checks that the .iso file is complete after its travels. If there is a problem with the .iso file, the script will exit and provide a failure message.  The verification step can be bypassed by using the <code>--noverify</code> option.
 
:*''[[wikipedia:dm-crypt|cryptsetup]]'' is only needed for the option to provide password protection and encryption for the persistent /home/liveuser folder. It is not necessary if one applies the  recommended {{Code|--unencrypted-home}} option. The {{Code|--unencrypted-home}} option is preferred because the reduced overhead improves robustness with the compressed ''[[wikipedia:SquashFS|SquashFS]]'' file system employed by the Live USB deployment.
 
:*''[[wikipedia:dm-crypt|cryptsetup]]'' is only needed for the option to provide password protection and encryption for the persistent /home/liveuser folder. It is not necessary if one applies the  recommended {{Code|--unencrypted-home}} option. The {{Code|--unencrypted-home}} option is preferred because the reduced overhead improves robustness with the compressed ''[[wikipedia:SquashFS|SquashFS]]'' file system employed by the Live USB deployment.
−
* Plug in a 1-GB or larger USB stick into your computer.
+
* Plug in a 2 GB or larger USB stick into your computer.
−
* Download the installation script: http://bit.ly/livecd-iso-to-disk.<br>(You will execute this script several steps below.)<br>Execute {{Code|livecd-iso-to-disk --help}} for usage details.
+
* Mount the 'SoaS.iso' image to reach the onboard livecd-iso-to-disk installation script:
−
** Alternatively, with 3 available loop devices, loop mount the 'SoaS.iso' image to reach the onboard livecd-iso-to-disk script:
+
: {{Code|sudo mkdir /run/soas/}}
−
**: {{Code|mkdir /mnt/soas/}}
+
: {{Code|sudo mount /path/to/Fedora-Live-SoaS-x86_64-20-1 /run/soas/}}
−
**: {{Code|mount /path/to/Fedora-13-i686-Live-SoaS.iso /mnt/soas/}}
+
:: (mount: /dev/loop0 is write-protected, mounting read-only)
−
**:: (mount: warning: /mnt/soas/ seems to be mounted read-only.)
+
* Change the working directory to the LiveOS folder on the SoaS.iso mount:
−
**: {{Code|mkdir /mnt/squash/}}
+
: {{Code|cd /run/soas/LiveOS}}
−
**: {{Code|mount /mnt/soas/LiveOS/squashfs.img /mnt/squash/}}
+
* Execute {{Code|./livecd-iso-to-disk --help}} for usage details. (The file is already executable.)
−
**: {{Code|mkdir /mnt/ext3fs/}}
 
−
**: {{Code|mount /mnt/squash/LiveOS/ext3fs.img /mnt/ext3fs/}}
 
−
**:: Later below, substitute {{Code|/mnt/ext3fs/LiveOS/livecd-iso-to-disk}} for the shell script name (the file is already executable).
 
  
−
* Check the USB device node name on your system. In the example below, the '''s'''torage '''d'''evice is /dev/sdb and filesystem partition on that device is /dev/sdb1:
+
* Check the USB device node name on your system. In the example below, the <abbr title="small computer system interface">'''s'''csi</abbr> '''d'''evice is /dev/sdc and filesystem partition on that device is /dev/sdc1:
−
: {{Code|df -Th}}
 
 
<pre>
 
<pre>
 
$ df -Th
 
$ df -Th
 
Filesystem    Type    Size  Used Avail Use% Mounted on
 
Filesystem    Type    Size  Used Avail Use% Mounted on
−
/dev/sda1     ext4    18G 5.6G  12G  33% /
+
rootfs      rootfs    20G  12G  7.5G  61% /
−
tmpfs        tmpfs    1.6G 536K 1.6G  1% /dev/shm
+
udev      devtmpfs    1.6G    0  1.6G  0% /dev
−
/dev/sdb1     vfat   996M     0  996M   0% /media/MyUSBdiscMountpoint
+
tmpfs        tmpfs    1.6G  904K  1.6G  1% /dev/shm
 +
tmpfs        tmpfs    1.6G  788K  1.6G  1% /run
 +
/dev/sda2     ext4    20G  12G  7.5G  61% /
 +
tmpfs        tmpfs    1.6G    0 1.6G  0% /sys/fs/cgroup
 +
tmpfs        tmpfs    1.6G     0 1.6G  0% /media
 +
/dev/sda2    ext4    20G  12G  7.5G  61% /tmp
 +
/dev/sda2    ext4    20G  12G  7.5G  61% /var/tmp
 +
/dev/sda2    ext4     20G  12G  7.5G  61% /home
 +
/dev/loop0 iso9660   668M  668M     0 100% /run/soas
 +
/dev/sdc1    vfat    3.8G 4.0K  3.8G   1% /run/media/MyAccount/MyUSBdiscMountPoint
 
</pre>
 
</pre>
 +
 +
Another way to find out the USB device node name on your system is issuing the command
 +
 +
    sudo fdisk -l
 +
 +
and looking in the output for the disk that corresponds to the USB device, e.g., a disk described with a stanza like
 +
 +
    Disk /dev/sd'''?''': 1939 MB, 1939865600 bytes
 +
    150 heads, 42 sectors/track, 601 cylinders, total 3788800 sectors
 +
    Units = sectors of 1 * 512 = 512 bytes
 +
    Sector size (logical/physical): 512 bytes / 512 bytes
 +
    I/O size (minimum/optimal): 512 bytes / 512 bytes
 +
    Disk identifier: 0x000e14bf
 +
   
 +
    Device Boot      Start        End      Blocks  Id  System
 +
    /dev/sd'''?'''1  *        2048    3784703    1891328    c  W95 FAT32 (LBA)
 +
 +
where '''?''' in /dev/sd'''?''' is (usually) a letter of the alphabet.
 +
 +
If you have only '''one''' storage device with 2 GB of nominal capacity, it will be easy to recognize the USB device in the fdisk output by looking at which device has (about) 2 GB of capacity. In the example above, "Disk /dev/sd'''?'''" reports to be as large as ''1939 MB'', that is almost 2 GB.
 +
 +
If you have '''more than one''' disk with about 2 GB of capacity, consider moving to a situation where you'll have only '''one''' device with 2 GB of capacity, because this will help out a lot in recognizing the drive correctly.
  
 
* Unmount the drive,<br>
 
* Unmount the drive,<br>
−
: {{Code|sudo umount /media/MyUSBdiscMountpoint}}
+
: {{Code|sudo umount /run/media/MyAccount/MyUSBdiscMountPoint}}
 +
:: <small>(The {{Code|/run/media/MyAccount/}} path is the new, standard Fedora mount point. Other operating systems may use {{Code|/media/MyMountPoint}}.)</small>
 +
{{:Sugar on a Stick/Linux/bootable device}}
 +
 
 +
* Run {{Code|livecd-iso-to-disk}} as the root user, making sure to pass the correct USB device node name and to set overlay and home size appropriately, depending on the target USB device storage capacity.
 +
:<div style="padding: 1em; border: 1px dashed #2F6FAB; background-color: #FBFBFB; margin: 1em 0px 1em 0em; font-family: Courier;">./livecd-iso-to-disk --reset-mbr --overlay-size-mb '''500''' --home-size-mb '''800''' --unencrypted-home '''/path/to/downloaded'''.iso /dev/sd'''?'''1</div>
 +
: If the command fails telling you that /dev/sd'''?'''1 does not exist, try using the command for /dev/sd'''?''' (the name of the device) and not for /dev/sd'''?'''1 (the name of the partition), like this:
 +
 
 +
:<div style="padding: 1em; border: 1px dashed #2F6FAB; background-color: #FBFBFB; margin: 1em 0px 1em 0em; font-family: Courier;">./livecd-iso-to-disk --reset-mbr --overlay-size-mb '''500''' --home-size-mb '''800''' --unencrypted-home '''/path/to/downloaded'''.iso /dev/sd'''?'''</div>
 +
 
 +
: If the command fails returning a complaint about the filesystem not being mounted, '''and''' you can afford to '''loose all data on the USB device''', you can try reformatting the USB device filesystem:
 +
 
 +
:* mount the USB device (e.g., by unplugging and re-inserting it),
 +
:* repeat the steps for learning its device name (there can be situations when the device name has changed!)
 +
:* issue the command with the '''{{Code|--format --msdos}}''' options, like this:
 +
{{Note/warning|Warning|The command described here will ask for a confirmation and will '''destroy''' all pre-existing data on your USB device.<br>
 +
See also [[olpc:How_to_Damage_a_FLASH_Storage_Device|How to Damage a FLASH Storage Device]] for a discussion of why using the factory format is preferred.}}
 +
::<div style="padding: 1em; border: 1px dashed #2F6FAB; background-color: #FBFBFB; margin: 1em 0px 1em 0em; font-family: Courier;">./livecd-iso-to-disk --reset-mbr '''--format --msdos''' --overlay-size-mb '''500''' --home-size-mb '''800''' --unencrypted-home '''/path/to/downloaded'''.iso /dev/sd'''?'''</div>
  
−
* Then check to see that the partition is marked as bootable,<br>
+
: {{Highlight|In the above examples, the {{Code|'''/path/to/downloaded'''.iso}} may be substituted with {{Code|/dev/loop0}}, as this is the loop device that the mount command chose.}}
−
: {{Code|sudo fdisk '''-l'''}} ''<----that's a lowercase letter 'L' for the '''l'''ist option.''
 
−
You should see output that looks like this:
 
−
Disk /dev/sdb: 1047 MB, 1047265280 bytes
 
−
255 heads, 63 sectors/track, 127 cylinders
 
−
Units = cylinders of 16065 * 512 = 8225280 bytes
 
−
Disk identifier: 0x0008325f
 
−
.
 
−
  Device Boot      Start        End      Blocks  Id  System
 
−
/dev/sdb1  *          1        127    1020096    6  FAT16
 
−
The '*' under the Boot column is what you want to see.
 
−
: If not, then
 
−
:* For Ubuntu 8.10, menu: System -> Administration -> Partition Editor (GParted).
 
−
::# Select your USB device (/dev/sd''b'' for the rest of these instructions),
 
−
::# then your partition (/dev/sd''b1''),
 
−
::# then menu: Partition -> Manage Flags,
 
−
::# check the boot box,
 
−
::# and Close to mark the partition as bootable.
 
  
−
:* For Fedora,
+
{{Note/note|Note| Additional USB or SD devices may be loaded from a running ''Sugar on a Stick'' image that was loaded with the livecd-iso-to-disk script (but not those installed by other methods) by running this command in the Terminal Activity as a root user:}}
−
::#  {{Code|parted /dev/sd''b''}}
+
:<div style="padding: 1em; border: 1px dashed #2F6FAB; background-color: #FBFBFB; margin: 1em 0px 1em 0em; font-family: Courier;">/run/initramfs/live/LiveOS/livecd-iso-to-disk --reset-mbr --overlay-size-mb '''500''' --home-size-mb '''800''' --unencrypted-home /run/initramfs/livedev /dev/sd'''?'''1</div>
−
::# {{Code|toggle 1 boot}}
 
−
::# {{Code|quit}}
 
  
−
* Change mode to make the script executable.
+
: The ''livecd-iso-to-disk'' installation method has other advantages over the ''liveusb-creator'' method by allowing the creation of a separate,  persistent /home/liveuser folder with the <tt>--home-size-mb ''NNN''</tt> option. This feature avoids consumption of the persistent overlay for Activity storage (see [[LiveOS image]]) and allows one to update the OS image while keeping the user files (by running the script against your existing installation but <u>leaving out</u> the --home-size-mb NNN option).
−
: {{Code|chmod +x livecd-iso-to-disk.sh}}
+
::* A {{Code|--delete-home}} option is available to avoid an error message while requesting both a new home (with {{Code|--home-size-mb}}) when there is already a persistent home on the device). You wouldn't use the --delete-home option on an upgrade of the operating system only.
−
* Run it as root, making sure to pass the correct USB device and to set overlay and home size appropriately, depending on the stick size.
+
:Depending on the size of your USB stick, you may have to decrease {{Code|--overlay-size-mb}} and {{Code|--home-size-mb}} values (for example, for a 2 GB stick, use 500 for the overlay and 800 for the home folder).
−
: {{Code|sudo ./livecd-iso-to-disk.sh --reset-mbr --overlay-size-mb 300 --home-size-mb 175 --delete-home --unencrypted-home /path/to/SoaS.iso /dev/sd''b1''}}
+
:: If you have sufficient capacity on your target device, and format it with an ext[234] filesystem to overcome the 4096-MB fat32 file size limit, you may avoid the SquashFS compression by including the {{Code|--skipcompress}} option in the script command line.
−
:: The ''livecd-iso-to-disk'' installation method has advantages over the ''liveusb-creator'' method by allowing the creation of a separate,  persistent /home/liveuser folder with the <tt>--home-size-mb ''NNN''</tt> option. This feature avoids consumption of the write-once persistent overlay for Activity storage (see [[LiveOS image]]) and allows one to update the OS image while keeping the user files (by running the script against your existing installation but <u>leaving out</u> the --home-size-mb NNN option).
 
−
::* The {{Code|--delete-home}} option is used to avoid an error message while requesting both a new home (with {{Code|--home-size-mb}}) and a persistent home (indirectly with {{Code|--unencrypted-home}}). You wouldn't use the --delete-home option on an upgrade of the operation system only.
 
−
:Depending on the size of your USB stick, you may have to decrease {{Code|--overlay-size-mb}} and {{Code|--home-size-mb}} values (for example, for a 1-GB stick, use 300 for the overlay and 175 for the home folder).
 
−
:: If you have sufficient capacity on your target device, and format it with an ext[234] filesystem to overcome the 2048-MB fat32 file size limit, you may avoid the SquashFS compression by including the {{Code|--skipcompress}} option in the script command line.
 
−
<!--:* If you get an error about udevinfo, you have the new version of udev where "udevadm info" is the proper command.
 
−
:*:Create an executable file called udevinfo somewhere in your path with the following contents:
 
−
:::{{Code|#!/bin/bash}}<br>
 
−
:::<code>udevadm info $*</code> -->
 
 
:* Watch out for errors in the output of the script, the script seems to ignore them! (and say all is fine on the last line).
 
:* Watch out for errors in the output of the script, the script seems to ignore them! (and say all is fine on the last line).
  
−
===livecd-iso-to-disk.sh transcript===
+
===livecd-iso-to-disk transcript===
  
 
<pre>
 
<pre>
−
$ sudo ./livecd-iso-to-disk.sh --reset-mbr --overlay-size-mb 300 --home-size-mb 200 --delete-home --unencrypted-home /mnt/VMs/Fedora-13-x86_64-Live-SoaS.iso /dev/sdb1
+
[LiveOS]$ sudo ./livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 800 --unencrypted-home /home/MyAccount/Downloads/Fedora-Live-SoaS-x86_64-20-1.iso /dev/sdc1
 
Verifying image...
 
Verifying image...
−
/mnt/VMs/Fedora-13-x86_64-Live-SoaS.iso:   7bb43cb6237802347e06d636b5974796
+
/home/MyAccount/Downloads/Fedora-Live-SoaS-x86_64-20-1.iso:   b0a9414ff7eb79b680d5c86440e19587
−
Fragment sums: 5cb46db2dd7545c7154d99616eaa942ca515fb37188c34cf82564a498b68
+
Fragment sums: 9bfe23577651c88dcfb78c76ac3a28a5c53eead4561e3bdc5921b8b2e748
 
Fragment count: 20
 
Fragment count: 20
 
Press [Esc] to abort check.
 
Press [Esc] to abort check.
Line 100: Line 155:
  
 
It is OK to use this media.
 
It is OK to use this media.
−
Copying live image to USB stick
+
Copying live image to target device.
 +
squashfs.img
 +
    630,784,000 100%    1.96MB/s    0:05:06 (xfr#1, to-chk=0/1)
 +
osmin.img
 +
          8,192 100%    0.00kB/s    0:00:00 (xfr#1, to-chk=0/1)
 
Updating boot config file
 
Updating boot config file
 
Initializing persistent overlay file
 
Initializing persistent overlay file
−
300+0 records in
+
500+0 records in
−
300+0 records out
+
500+0 records out
−
314572800 bytes (315 MB) copied, 35.3334 s, 8.9 MB/s
+
524288000 bytes (524 MB) copied, 216.717 s, 2.4 MB/s
 
Initializing persistent /home
 
Initializing persistent /home
−
200+0 records in
+
800+0 records in
−
200+0 records out
+
800+0 records out
−
209715200 bytes (210 MB) copied, 24.2014 s, 8.7 MB/s
+
838860800 bytes (839 MB) copied, 344.643 s, 2.4 MB/s
 
Formatting unencrypted /home
 
Formatting unencrypted /home
−
mke2fs 1.41.12 (17-May-2010)
+
mke2fs 1.42.8 (20-Jun-2013)
 
Filesystem label=
 
Filesystem label=
 
OS type: Linux
 
OS type: Linux
−
Block size=1024 (log=0)
+
Block size=4096 (log=2)
−
Fragment size=1024 (log=0)
+
Fragment size=4096 (log=2)
 
Stride=0 blocks, Stripe width=0 blocks
 
Stride=0 blocks, Stripe width=0 blocks
−
51200 inodes, 204800 blocks
+
51296 inodes, 204800 blocks
 
10240 blocks (5.00%) reserved for the super user
 
10240 blocks (5.00%) reserved for the super user
−
First data block=1
+
First data block=0
−
Maximum filesystem blocks=67371008
+
Maximum filesystem blocks=209715200
−
25 block groups
+
7 block groups
−
8192 blocks per group, 8192 fragments per group
+
32768 blocks per group, 32768 fragments per group
−
2048 inodes per group
+
7328 inodes per group
 
Superblock backups stored on blocks:  
 
Superblock backups stored on blocks:  
−
8193, 24577, 40961, 57345, 73729
+
32768, 98304, 163840
  
 +
Allocating group tables: done                           
 
Writing inode tables: done                             
 
Writing inode tables: done                             
 
Creating journal (4096 blocks): done
 
Creating journal (4096 blocks): done
 
Writing superblocks and filesystem accounting information: done
 
Writing superblocks and filesystem accounting information: done
  
−
This filesystem will be automatically checked every 33 mounts or
+
tune2fs 1.42.8 (20-Jun-2013)
−
180 days, whichever comes first.  Use tune2fs -c or -i to override.
 
−
tune2fs 1.41.12 (17-May-2010)
 
 
Setting maximal mount count to -1
 
Setting maximal mount count to -1
 
Setting interval between checks to 0 seconds
 
Setting interval between checks to 0 seconds
 
Installing boot loader
 
Installing boot loader
−
USB stick set up as live image!
+
Target device is now set up with a Live image!
 
</pre>
 
</pre>
  
 
== What's next? ==
 
== What's next? ==
  
−
After you've created your stick, it's time to [[Sugar_on_a_Stick#Boot|boot your stick]] and [[Sugar on a Stick/Getting Involved | test]] it out.  Please also [[Sugar on a Stick/Getting Involved/Testing | report]] your observations.
+
After you've created your stick, it's time to [[Sugar on a Stick/Boot|boot your stick]] and [[Sugar on a Stick/Getting Involved | test]] it out.  Please also [[Sugar on a Stick/Getting Involved/Testing | report]] your observations.

Latest revision as of 11:10, 26 February 2015


Introduction

The page Sugar on a Stick/Linux/Installation provides up-to-date and concise instructions for loading the most recent released version of Sugar on a Stick (SoaS) onto a USB/SD flash storage device using GNU/Linux.

livecd-iso-to-disk tool

Before experimenting beyond the instructions in the link above, please read fedora:How to create and use Live USB for more background details. That page starts with Direct Write methods of creating a (non-persistent) Live USB system, and further down the page describes using the livecd-iso-to-disk tool which is the prefered method of making persistent Sugar on a Stick.

The reader should be aware that Ubuntu/Debian use a method to create a live USB system which is fundamentally different to Fedora's method, used by Sugar.

Quote from the above Fedora page
Issues using other Linux distributions
Ubuntu and derivative Linux distributions have a usb-creator program similar to Live USB Creator. This does not work with Fedora ISO images, it silently rejects them. usb-creator requires the ISO to have a Debian layout, with a /.disk/info file and a casper directory. Do not attempt to use this utility to write a Fedora ISO image.
The livecd-iso-to-disk script is not meant to be run from a non-Fedora system. Even if it happens to run and write a stick apparently successfully from some other distribution, the stick may well fail to boot. Use of livecd-iso-to-disk on any distribution other than Fedora is unsupported and not expected to work: please use an alternative method, such as the "direct write" methods described above.
end Quote

Persistence

Persistence in the context of a live USB system, is the ability to save both system changes, including Software updates, and the user's work between sessions, that is after shutdown and reboot.

Linux users, suggested methods

Linux users might consider reading the following pages for supported methods to install SoaS.

Users of Fedora and Red Hat derivitives:

Sugar on a Stick/Linux/Installation

Debian, Ubuntu, and derivitives, and other distros:

Make your SoaS from within a Sugar Live OS environment, which is itself a Fedora system.
Either Burn a Sugar.iso and follow the section of Sugar on a Stick/Installation entitled
"1. Burn a CD-ROM disc, boot from it, then run the script, livecd-iso-to-disk"
or create a Sugar image by dd or any of the methods on this page. Then boot into the Live OS, to create SoaS from the running Live OS image.


If you have questions, trouble, or feedback, please let us know on the discussion page. If you can improve these instructions, please edit the page and do so!

Experimental

To explore a variety of experimental options for putting a Sugar image on a USB or SD flash drive under GNU/Linux, see the following pages:

SoaS test builds | OLPC XO-1 | openSUSE | Trisquel | VirtualBox | VMware | non-compressed Fedora | Live USB: (all known portable Sugar distributions)

Load SoaS further insight

This is known to work in Fedora and has been reported to work in Ubuntu.

First, download a SoaS .iso image from http://spins.fedoraproject.org/soas/#downloads, then return here.

  • Make sure you have the syslinux package installed on the operating system that you will use to prepare the Live USB image. It is recommended that you also have the isomd5sum package installed. The cryptsetup package is another option potentially used by the "livecd-iso-to-disk" installation script. (On Ubuntu, sudo apt-get install syslinux isomd5sum cryptsetup will install the packages. They are also available through the Synaptic Package Manager.)
(On Gentoo, one needs to uncomment 'SAMPLE FILE' in /etc/mtools/mtools.conf to make syslinux work.)
  • syslinux is needed to set up booting on the FAT file system of the USB disc or Live CD.
  • isomd5sum is needed for the recommended verification step, which checks that the .iso file is complete after its travels. If there is a problem with the .iso file, the script will exit and provide a failure message. The verification step can be bypassed by using the --noverify option.
  • cryptsetup is only needed for the option to provide password protection and encryption for the persistent /home/liveuser folder. It is not necessary if one applies the recommended --unencrypted-home option. The --unencrypted-home option is preferred because the reduced overhead improves robustness with the compressed SquashFS file system employed by the Live USB deployment.
  • Plug in a 2 GB or larger USB stick into your computer.
  • Mount the 'SoaS.iso' image to reach the onboard livecd-iso-to-disk installation script:
sudo mkdir /run/soas/
sudo mount /path/to/Fedora-Live-SoaS-x86_64-20-1 /run/soas/
(mount: /dev/loop0 is write-protected, mounting read-only)
  • Change the working directory to the LiveOS folder on the SoaS.iso mount:
cd /run/soas/LiveOS
  • Execute ./livecd-iso-to-disk --help for usage details. (The file is already executable.)
  • Check the USB device node name on your system. In the example below, the scsi device is /dev/sdc and filesystem partition on that device is /dev/sdc1:
$ df -Th
Filesystem    Type    Size  Used Avail Use% Mounted on
rootfs      rootfs     20G   12G  7.5G  61% /
udev      devtmpfs    1.6G     0  1.6G   0% /dev
tmpfs        tmpfs    1.6G  904K  1.6G   1% /dev/shm
tmpfs        tmpfs    1.6G  788K  1.6G   1% /run
/dev/sda2     ext4     20G   12G  7.5G  61% /
tmpfs        tmpfs    1.6G     0  1.6G   0% /sys/fs/cgroup
tmpfs        tmpfs    1.6G     0  1.6G   0% /media
/dev/sda2     ext4     20G   12G  7.5G  61% /tmp
/dev/sda2     ext4     20G   12G  7.5G  61% /var/tmp
/dev/sda2     ext4     20G   12G  7.5G  61% /home
/dev/loop0 iso9660    668M  668M     0 100% /run/soas
/dev/sdc1     vfat    3.8G  4.0K  3.8G   1% /run/media/MyAccount/MyUSBdiscMountPoint

Another way to find out the USB device node name on your system is issuing the command 

   sudo fdisk -l

and looking in the output for the disk that corresponds to the USB device, e.g., a disk described with a stanza like 

   Disk /dev/sd?: 1939 MB, 1939865600 bytes
   150 heads, 42 sectors/track, 601 cylinders, total 3788800 sectors
   Units = sectors of 1 * 512 = 512 bytes
   Sector size (logical/physical): 512 bytes / 512 bytes
   I/O size (minimum/optimal): 512 bytes / 512 bytes
   Disk identifier: 0x000e14bf
   
   Device Boot      Start         End      Blocks   Id  System
   /dev/sd?1   *        2048     3784703     1891328    c  W95 FAT32 (LBA)

where ? in /dev/sd? is (usually) a letter of the alphabet.

If you have only one storage device with 2 GB of nominal capacity, it will be easy to recognize the USB device in the fdisk output by looking at which device has (about) 2 GB of capacity. In the example above, "Disk /dev/sd?" reports to be as large as 1939 MB, that is almost 2 GB.

If you have more than one disk with about 2 GB of capacity, consider moving to a situation where you'll have only one device with 2 GB of capacity, because this will help out a lot in recognizing the drive correctly.

  • Unmount the drive,
sudo umount /run/media/MyAccount/MyUSBdiscMountPoint
(The /run/media/MyAccount/ path is the new, standard Fedora mount point. Other operating systems may use /media/MyMountPoint.)
  • Check the disk partition table for a device, such as /dev/sdc,
sudo fdisk -l /dev/sdc   <----that's a lowercase letter 'L' for the list option.
    You should see something like the following: 
    $ sudo fdisk -l /dev/sdc

Disk /dev/sdc: 4012 MB, 4012900352 bytes
124 heads, 62 sectors/track, 1019 cylinders, total 7837696 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000a9c7

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *          62     7834071     3917005    c  W95 FAT32 (LBA)

    The asterisk, * , under the Boot column indicates that the partition is bootable.

        If it is missing, then execute the commands here:
    1. parted /dev/sdc
    2. toggle 1 boot
    3. quit
  • Run livecd-iso-to-disk as the root user, making sure to pass the correct USB device node name and to set overlay and home size appropriately, depending on the target USB device storage capacity.
./livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 800 --unencrypted-home /path/to/downloaded.iso /dev/sd?1
If the command fails telling you that /dev/sd?1 does not exist, try using the command for /dev/sd? (the name of the device) and not for /dev/sd?1 (the name of the partition), like this:
./livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 800 --unencrypted-home /path/to/downloaded.iso /dev/sd?
If the command fails returning a complaint about the filesystem not being mounted, and you can afford to loose all data on the USB device, you can try reformatting the USB device filesystem:
  • mount the USB device (e.g., by unplugging and re-inserting it),
  • repeat the steps for learning its device name (there can be situations when the device name has changed!)
  • issue the command with the --format --msdos options, like this:
Warning.png
Warning
The command described here will ask for a confirmation and will destroy all pre-existing data on your USB device.
See also How to Damage a FLASH Storage Device for a discussion of why using the factory format is preferred.
./livecd-iso-to-disk --reset-mbr --format --msdos --overlay-size-mb 500 --home-size-mb 800 --unencrypted-home /path/to/downloaded.iso /dev/sd?
In the above examples, the /path/to/downloaded.iso may be substituted with /dev/loop0, as this is the loop device that the mount command chose.
35px-Activity-write.png
Note
Additional USB or SD devices may be loaded from a running Sugar on a Stick image that was loaded with the livecd-iso-to-disk script (but not those installed by other methods) by running this command in the Terminal Activity as a root user:
/run/initramfs/live/LiveOS/livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 800 --unencrypted-home /run/initramfs/livedev /dev/sd?1
The livecd-iso-to-disk installation method has other advantages over the liveusb-creator method by allowing the creation of a separate, persistent /home/liveuser folder with the --home-size-mb NNN option. This feature avoids consumption of the persistent overlay for Activity storage (see LiveOS image) and allows one to update the OS image while keeping the user files (by running the script against your existing installation but leaving out the --home-size-mb NNN option).
  • A --delete-home option is available to avoid an error message while requesting both a new home (with --home-size-mb) when there is already a persistent home on the device). You wouldn't use the --delete-home option on an upgrade of the operating system only.
Depending on the size of your USB stick, you may have to decrease --overlay-size-mb and --home-size-mb values (for example, for a 2 GB stick, use 500 for the overlay and 800 for the home folder).
If you have sufficient capacity on your target device, and format it with an ext[234] filesystem to overcome the 4096-MB fat32 file size limit, you may avoid the SquashFS compression by including the --skipcompress option in the script command line.
  • Watch out for errors in the output of the script, the script seems to ignore them! (and say all is fine on the last line).

livecd-iso-to-disk transcript

[LiveOS]$ sudo ./livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 800 --unencrypted-home /home/MyAccount/Downloads/Fedora-Live-SoaS-x86_64-20-1.iso /dev/sdc1
Verifying image...
/home/MyAccount/Downloads/Fedora-Live-SoaS-x86_64-20-1.iso:    b0a9414ff7eb79b680d5c86440e19587
Fragment sums: 9bfe23577651c88dcfb78c76ac3a28a5c53eead4561e3bdc5921b8b2e748
Fragment count: 20
Press [Esc] to abort check.
Checking: 100.0%

The media check is complete, the result is: PASS.

It is OK to use this media.
Copying live image to target device.
squashfs.img
    630,784,000 100%    1.96MB/s    0:05:06 (xfr#1, to-chk=0/1)
osmin.img
          8,192 100%    0.00kB/s    0:00:00 (xfr#1, to-chk=0/1)
Updating boot config file
Initializing persistent overlay file
500+0 records in
500+0 records out
524288000 bytes (524 MB) copied, 216.717 s, 2.4 MB/s
Initializing persistent /home
800+0 records in
800+0 records out
838860800 bytes (839 MB) copied, 344.643 s, 2.4 MB/s
Formatting unencrypted /home
mke2fs 1.42.8 (20-Jun-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
51296 inodes, 204800 blocks
10240 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=209715200
7 block groups
32768 blocks per group, 32768 fragments per group
7328 inodes per group
Superblock backups stored on blocks: 
	32768, 98304, 163840

Allocating group tables: done                            
Writing inode tables: done                            
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

tune2fs 1.42.8 (20-Jun-2013)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
Installing boot loader
Target device is now set up with a Live image!

What's next?

After you've created your stick, it's time to boot your stick and test it out. Please also report your observations.

Retrieved from "https://wiki.sugarlabs.org/index.php?title=Sugar_on_a_Stick/Linux&oldid=94537"