Sugar on a Stick/Linux/Installation
< Sugar on a Stick | Linux
Jump to navigation
Jump to search
These are the steps for installing Sugar on a Stick on a USB/SD device.
This page is transcluded to various installation instruction pages.
- Download the latest Sugar on a Stick .iso file.
- Install the livecd-tools package to obtain the installation script and the SYSLINUX boot loader. Use this command to obtain the installer:
sudo dnf install livecd-tools
- Insert a USB stick of 2 GB or greater capacity into your computer.
- With root user permissions at a terminal or console command line, use the command
sudo df -Th
orsudo blkid
to get the USB device node name. - (Items in angle brackets, such as <MyAccount> are descriptive placeholders.)
- (The
/run/media/<MyAccount>/
path is the standard mount point for removable media./media/<MyMountPoint>
is common on other operating systems.) - (Additional disk drive partitions may be listed on your computer.)
- The mount point (Mounted on), Filesystem, Size, and LABEL should help you identify what you want.
- Unmount the USB device filesystem:
umount /run/media/<MyAccount>/<MyUSBdiscMountPoint>
- (The
/run/media/<MyAccount>/
path is the standard mount point. Other operating systems may use/media/<MyMountPoint>
.)
- (The
- (You should have the isomd5sum package installed so that the following installation script can verify the download.)
- Load: Execute the following installation command, as the root user, in one command line with many options:livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 500 --unencrypted-home /path/to/downloaded.iso /dev/sd?1
- The '
?
' in the final parameter represents the target USB device scsi drive node, such assdb1
orsdc1
, etc., and/path/to/downloaded.iso
is the location and name of the .iso file. - The operating system will occupy ~960 MB, and the overlay and home size arguments, 500 and 500, were selected to fit in a 2 GB device. These may be adjusted depending on your preferences and device capacity (see LiveOS image). On a 4 GB device, one might use 1000 and 1600 for the size arguments.
The installation transcript should look something like the following:[<user>@<system> <working directory>]$ sudo livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 500 --unencrypted-home /<path to>/Fedora-SoaS-Live-x86_64-29-1.2.iso /dev/sdc1 Verifying image... /<path to>/Fedora-SoaS-Live-x86_64-29-1.2.iso: 7641738bb0493f4a521af3a694e4f4ae Fragment sums: 7c5f6e26254ca7438da4d5b28a72a9f38711e3bb34b2748e177533ef5c25 Fragment count: 20 Supported ISO: no Press [Esc] to abort check. Checking: 100.0% The media check is complete, the result is: PASS. It is OK to use this media. Copying LiveOS image to target device... squashfs.img 905,187,328 100% 374.66MB/s 0:00:02 (xfr#1, to-chk=0/1) Syncing filesystem writes to disc. Please wait, this may take a while... Setting up /EFI/BOOT Updating boot config files. Initializing persistent overlay... 500+0 records in 500+0 records out 524288000 bytes (524 MB, 500 MiB) copied, 0.448825 s, 1.2 GB/s Initializing persistent /home 500+0 records in 500+0 records out 524288000 bytes (524 MB, 500 MiB) copied, 0.415686 s, 1.3 GB/s Formatting unencrypted home.img mke2fs 1.44.3 (10-July-2018) Creating filesystem with 512000 1k blocks and 128016 inodes Filesystem UUID: 8fc0d8be-5c67-46a8-b621-6bd62bad3267 Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409 Allocating group tables: done Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done tune2fs 1.44.3 (10-July-2018) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Installing boot loader... Target device is now set up with a Live image!
- The '
- Boot: Insert the USB stick into a bootable USB port on your computer. Set the option to "boot from USB" in your computer's BIOS setup, and then start up the computer.
You should see something like the following:
[<user>@<system> <working directory>]$ sudo df -Th Filesystem Type Size Used Avail Use% Mounted on rootfs rootfs 20G 5.5G 14G 29% / devtmpfs devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 1.6G 788K 1.6G 1% /dev/shm tmpfs tmpfs 1.6G 1.3M 1.6G 1% /run tmpfs tmpfs 1.6G 0 1.6G 0% /sys/fs/cgroup tmpfs tmpfs 1.6G 0 1.6G 0% /media /dev/loop0 iso9660 959M 959M 0 100% /run/soas /dev/sdc1 vfat 2.0G 2.0G 53M 98% /run/media/<MyAccount>/<filesystem label>/
[<user>@<system> <working directory>]$ sudo blkid /dev/sda1: LABEL="Fedora29" UUID="45e12f4a-51f2-463e-a33b-a6c0f157ab77" TYPE="ext4" PARTUUID="000b2340-04" /dev/sdc1: LABEL="LIVE" UUID="D2AC-5056" TYPE="vfat" PARTUUID="000056b3-01" /dev/loop0: UUID="2018-10-25-00-02-47-00" LABEL="Fedora-SoaS-Live-29-1-2" TYPE="iso9660" PTUUID="3299e5ae" PTTYPE="dos"
- To create more Sugar Sticks on other 2 GB or greater USB or SD devices, while running Sugar on a Stick, one may run the Terminal Activity, and execute this command as the root user:livecd-iso-to-disk --reset-mbr --overlay-size-mb 500 --home-size-mb 500 --delete-home --unencrypted-home /run/initramfs/livedev /dev/sd?1
- Replace
/dev/sd?1
with a new device node for the second USB/SD device that you want to load with Sugar on a Stick.
- To create more Sugar Sticks on other 2 GB or greater USB or SD devices, while running Sugar on a Stick, one may run the Terminal Activity, and execute this command as the root user: