Fedora 32

Fedora^® version page: 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 |
Fedora and the Infinity design logo are trademarks of Red Hat, Inc.

some of the older versions listed here ^ may be security risks- for archive purposes only

Fedora 32

• https://fedoraproject.org/wiki/Releases/32/Spins#Official_Fedora_Spins

Fedora 32 Rawhide

• latest builds : http://koji.fedoraproject.org/koji/tasks?start=0&state=all&view=tree&method=livemedia&order=-id
• updated oct/1/2019

Fedora Docs

https://docs.fedoraproject.org/en-US/docs/

Rawhide

• https://kojipkgs.fedoraproject.org/compose/rawhide/Fedora-Rawhide-20191003.n.1/compose/Spins/x86_64/iso/Fedora-SoaS-Live-x86_64-Rawhide-20191003.n.1.iso
• https://kojipkgs.fedoraproject.org/compose/rawhide/latest-Fedora-Rawhide/compose/
• https://kojipkgs.fedoraproject.org/compose/rawhide/latest-Fedora-Rawhide/compose/Spins/x86_64/iso/Fedora-SoaS-Live-x86_64-Rawhide-20190921.n.0.iso

sugar 0.14 installs with fedora media writer usb to hard disk

• https://kojipkgs.fedoraproject.org/compose/rawhide/latest-Fedora-Rawhide/compose/Spins/armhfp/images/Fedora-SoaS-armhfp-Rawhide-20190921.n.0-sda.raw.xz

Rpi

Note there is no rpi4 support at this time

Raspberry_Pi

"Fedora supports the the Raspberry Pi Model 2B and 3-series of devices including the 3B, 3B+, 3A+, 3CM and 3CM+ in Fedora 29 and later releases."

• https://www.balena.io/etcher/ ( Used to flash micro-sd)

• https://fedoraproject.org/wiki/Architectures/ARM/Raspberry_Pi (read this first)
• https://dl.fedoraproject.org/pub/fedora/linux/releases/30/Spins/armhfp/images/ (f30-1.2 release)
• https://www.tomshardware.com/reviews/raspberry-pi-command-line-commands,6159.html
• https://mirrors.rit.edu/fedora/fedora/linux/releases/29/Spins/armhfp/images/
• https://fedoraproject.org/wiki/Architectures/ARM
• https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md (determining raspberrypi versions)
• https://dl.fedoraproject.org/pub/fedora/linux/development/30/Spins/armhfp/images/
• https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Spins/armhfp/images/ (f31 rawhide)
• https://github.com/sugarlabs/sugar/blob/master/docs/rpi-soas.md

https://wiki.sugarlabs.org/go/Sugar_Creation_Kit/sck/Advanced_Topics#Raspberry_Pi_.2F_RPi (old work)

https://wiki.cdot.senecacollege.ca/wiki/Raspberry_Pi_Fedora_Remix_Installation

https://www.raspberrypi.org/downloads/

http://pidora.ca/

https://elinux.org/RPi_Distributions#Fedora_Remix

https://fedoraproject.org/wiki/QA:Testcase_Virt_ARM_on_x86 (install arm in VMM)

Rpi-FAQ

• https://www.beyondlogic.org/an-introduction-to-chardev-gpio-and-libgpiod-on-the-raspberry-pi/
• https://github.com/bookwar/python-gpiodev
• https://www.beyondlogic.org/compiling-u-boot-with-device-tree-support-for-the-raspberry-pi/
• https://www.tomshardware.com/news/raspberry-pi-4-ssd-test,39811.html

Installation method used for testing

1. Download Fedora-SoaS-armhfp..sda.raw.xz file to /Downloads
2. extract here to expand to Fedora-SoaS-armhfp..sda.raw.xz file
3. start Fedora Media Writer/select Fedora-SoaS-armhfp..sda.raw file in "Custom"
4. insert micro SD into usb Card Reader and plug in it's USB
5. select RPiB3+ and write Fedora-SoaS-armhfp..sda.raw.xz file
6. exit Fedora MediaWriter
7. start gparted and expand partition 3 to full size of micro SD (Class 10 32 GB)
8. insert mico SD in RPi3B+ slot and power up.

Fedora MediaWriter

• https://github.com/FedoraQt/MediaWriter/releases
• https://fedoraproject.org/wiki/Test_Day:2019-04-30_Fedora_Media_Writer

"What changes when Rpi 3B+;Rpi2B+; or "other is selected in version 4.1.4.1-fc30 ?"

• satellit May 19, 2019

"Nothing, really. The tentative plan was to support more ARM spins in the future but no work towards that was done yet."

• Martin Bříza:5/20/2019

Raspberry-Pi-IIAB

• http://wiki.laptop.org/go/IIAB/FAQ
• https://en.wikipedia.org/wiki/Raspbian
• http://downloads.raspberrypi.org/raspbian/release_notes.txt
• https://www.raspberrypi.org/documentation/installation/installing-images/linux.md

https://www.youtube.com/channel/UC0cBGCxr_WPBPa3IqPVEe3g

• https://www.raspberrypi.org/downloads/raspbian/
• https://github.com/iiab/iiab/wiki/Raspberry-Pi-IIAB-Images
• https://en.wikipedia.org/wiki/Raspberry_Pi#Third_party_application_software
• http://med.iiab.me/home/ (live medical iiAB sample)

Install of IIAB on RPi4

"The Raspberry Pi 4 is the latest upgrade in the Raspberry Pi SBC series. : This one has a Quadcore A72 CPU, up to 4 GB of LPDDR4 RAM, 2x USB 2.0, 2x USB 3.0 ports, double micro-HDMI ports, AC Wifi, Bluetooth 5.0 and Gigabit ethernet."

• NOTE medium and full install include sugarizer-server (default)

https://sugarizer.org/

https://github.com/llaske/sugarizer

https://github.com/llaske/sugarizer-server

Aug 6 2017

• Same install on a 32GB sd: using my Rpi3B+.
• Only difference: used medium install and only downloaded a few items to test

---

Aug 2 2017

Installed "Raspbian Buster with desktop and recommended software" (1)

• https://downloads.raspberrypi.org/raspbian_full_latest (2019-07-10)

2019-07-10-raspbian-buster-full.img (extracted: 6.4 GB)

256 GB SanDisk Ultra micoSDXC A1 card

Install with Etcher:

• https://www.balena.io/etcher/

In microSD reader

Insert card in RPi4 and power up:

• RPi4 (with 4 GB Memory) booted and changed GPU memory in "Preferences / Raspberry Pi4 Configuration" to [356] from [76]

( 2019-07-10-raspbian-buster-full - allows changing the allocated amount of memory in the RPi4)

(This appears to increase performance)

• https://github.com/raspberrypi/documentation/blob/master/configuration/raspi-config.md#memory-split

• in add/remove software: install firefox ESR

• in terminal:

 curl d.iiab.io/install.txt | sudo bash

• chose maximum iiab install size

• used middle selection for type of install (single point)

• Start Ansible install

Photograph terminal screen when it shows: "Internet-In-A Box (IIAB) software install is complete"

Reboot (by hitting [enter] key)

• Change iiab-admin's password before connecting your server to the Internet.

You can do this within http://box.lan/admin -> Utilities menu — or at the command line, if you type "passwd iiab-admin". 

• in firefox enter (in command line): 10.0.0.208/admin with user:iiab-admin and the password you entered above ^

Starts Admin console

• test setup ^

(1) http://wiki.laptop.org/go/IIAB/FAQ#Is_a_quick_installation_possible.3F

NOTES

• run iiab-hotspot-on and iiab-hotspot-off which are found in /usr/bin — these are especially useful after you've used a Raspberry Pi's internal Wi-Fi to download IIAB and content.
• http://wiki.laptop.org/go/IIAB/FAQ#What_services_.28IIAB_apps.29_are_suggested_during_installation.3F

Silverblue

• https://silverblue.fedoraproject.org/
• https://docs.fedoraproject.org/en-US/fedora-silverblue/toolbox/
• https://docs.fedoraproject.org/en-US/fedora-silverblue/

still in development

"Fedora Silverblue is an immutable desktop operating system, which aims to be extremely stable and reliable. It also aims to be an excellent platform for developers and for those using container-focused workflows."

rpmfusion

• https://rpmfusion.org/Configuration

flatpacks

• http://docs.flatpak.org/en/latest/

https://developers.redhat.com/blog/2019/04/24/how-to-run-systemd-in-a-container/

https://github.com/containers/libpod/

Endless OS

• https://endlessos.com/download/ (eos-eos3.6-amd64-amd64.190709-170830.en.iso torrent only - free)

"Endless OS is a free, easy-to-use operating system preloaded with over 100 apps.." (32GB installer usb - uses flatpacks)

https://betanews.com/2019/06/12/debian-10-buster-endless-os-linux/

https://github.com/endlessm (github)

https://firefox-flatpak.mojefedora.cz/ (firefox flatpack that installs)

"This is an unofficial Firefox flatpak repository provided by Fedora and Red Hat maintainers and made for testing purposes. "

https://github.com/flathub/org.fedoraproject.MediaWriter/issues/5 (Fedora MediaWriter bug in flatpack)

"Endless OS is built on top of decades of efforts from the free and open-source software community, and we acknowledge a great debt to it. We contribute back to open source projects whenever we can, but not all the software shipped on our computer is open source. Please refer to https://endlessm.com/for-developers developer for more information."

references

• http://wiki.laptop.org/go/The_OLPC_Wiki
• http://linuxcommand.org/lc3_lts0090.php
• https://www.redhat.com/en/blog/transforming-development-experience-within-centos

https://developers.redhat.com/blog/2019/09/24/changes-to-centos-what-centos-stream-means-for-developers/

https://fedoraproject.org/wiki/QA:Testcase_Virt_ARM_on_x8

https://npmccallum.gitlab.io/post/cross-architecture-roots-with-dnf/

https://fedoraproject.org/wiki/QA:Updates_Testing

GCI

• https://opensource.googleblog.com/2019/09/google-code-in-2019-is-right-around_23.html

https://codein.withgoogle.com/

sugar-live-build-20191002/

• http://people.sugarlabs.org/~quozl/
• http://people.sugarlabs.org/~quozl/sugar-live-build-20191002/

"On Wed, Oct 2, 2019 at 3:34 AM James Cameron <quozl@laptop.org> wrote:

       Announcing Sugar Live Build with Sugar 0.116 and the Fructose activity
       set, ported to Python 3.  It can be used for testing Sugar quickly and
       easily.
       1.  boot from hard drive, flash drive, and optical media,
       automatically starting Sugar without persistence,
       2.  or install as a virtual machine, with persistence and password
       protection,
       3.  based on the Debian 10 Buster Live Build,
       4.  for developers, contains all build dependencies, configured source
       trees (git clones in /usr/src), and binaries (make install) for the
       Sugar 0.116 Sucrose modules and the Fructose activity set,
       5.  contains a backport of Metacity 3.34,
       6.  does not contain Debian Sugar packages," 

• sugar-devel@lists.sugarlabs.org