Fedora 32

Fedora^® version page: 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 |
Fedora and the Infinity design logo are trademarks of Red Hat, Inc.

some of the older versions listed here ^ may be security risks- for archive purposes only

Fedora 32

Fedora 32 Rawhide

• updated Sept/21/2019

Fedora Docs

https://docs.fedoraproject.org/en-US/docs/

PAGE UNDER CONSTRUCTION

Rawhide

• https://kojipkgs.fedoraproject.org/compose/rawhide/latest-Fedora-Rawhide/compose/
• https://kojipkgs.fedoraproject.org/compose/rawhide/latest-Fedora-Rawhide/compose/Spins/x86_64/iso/Fedora-SoaS-Live-x86_64-Rawhide-20190921.n.0.iso

sugar 0.14 installs with fedora media writer usb to hard disk

• https://kojipkgs.fedoraproject.org/compose/rawhide/latest-Fedora-Rawhide/compose/Spins/armhfp/images/Fedora-SoaS-armhfp-Rawhide-20190921.n.0-sda.raw.xz

Rpi

Note there is no rpi4 support at this time

Raspberry_Pi

"Fedora supports the the Raspberry Pi Model 2B and 3-series of devices including the 3B, 3B+, 3A+, 3CM and 3CM+ in Fedora 29 and later releases."

• https://www.balena.io/etcher/ ( Used to flash micro-sd)

• https://fedoraproject.org/wiki/Architectures/ARM/Raspberry_Pi (read this first)
• https://dl.fedoraproject.org/pub/fedora/linux/releases/30/Spins/armhfp/images/ (f30-1.2 release)
• https://www.tomshardware.com/reviews/raspberry-pi-command-line-commands,6159.html
• https://mirrors.rit.edu/fedora/fedora/linux/releases/29/Spins/armhfp/images/
• https://fedoraproject.org/wiki/Architectures/ARM
• https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md (determining raspberrypi versions)
• https://dl.fedoraproject.org/pub/fedora/linux/development/30/Spins/armhfp/images/
• https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Spins/armhfp/images/ (f31 rawhide)
• https://github.com/sugarlabs/sugar/blob/master/docs/rpi-soas.md

https://wiki.sugarlabs.org/go/Sugar_Creation_Kit/sck/Advanced_Topics#Raspberry_Pi_.2F_RPi (old work)

https://wiki.cdot.senecacollege.ca/wiki/Raspberry_Pi_Fedora_Remix_Installation

https://www.raspberrypi.org/downloads/

http://pidora.ca/

https://elinux.org/RPi_Distributions#Fedora_Remix

https://fedoraproject.org/wiki/QA:Testcase_Virt_ARM_on_x86 (install arm in VMM)

Rpi-FAQ

• https://www.beyondlogic.org/an-introduction-to-chardev-gpio-and-libgpiod-on-the-raspberry-pi/
• https://github.com/bookwar/python-gpiodev
• https://www.beyondlogic.org/compiling-u-boot-with-device-tree-support-for-the-raspberry-pi/
• https://www.tomshardware.com/news/raspberry-pi-4-ssd-test,39811.html

Installation method used for testing

1. Download Fedora-SoaS-armhfp..sda.raw.xz file to /Downloads
2. extract here to expand to Fedora-SoaS-armhfp..sda.raw.xz file
3. start Fedora Media Writer/select Fedora-SoaS-armhfp..sda.raw file in "Custom"
4. insert micro SD into usb Card Reader and plug in it's USB
5. select RPiB3+ and write Fedora-SoaS-armhfp..sda.raw.xz file
6. exit Fedora MediaWriter
7. start gparted and expand partition 3 to full size of micro SD (Class 10 32 GB)
8. insert mico SD in RPi3B+ slot and power up.

Fedora MediaWriter

• https://github.com/FedoraQt/MediaWriter/releases
• https://fedoraproject.org/wiki/Test_Day:2019-04-30_Fedora_Media_Writer

"What changes when Rpi 3B+;Rpi2B+; or "other is selected in version 4.1.4.1-fc30 ?"

• satellit May 19, 2019

"Nothing, really. The tentative plan was to support more ARM spins in the future but no work towards that was done yet."

• Martin Bříza:5/20/2019

Raspberry-Pi-IIAB

• http://wiki.laptop.org/go/IIAB/FAQ
• https://en.wikipedia.org/wiki/Raspbian
• http://downloads.raspberrypi.org/raspbian/release_notes.txt
• https://www.raspberrypi.org/documentation/installation/installing-images/linux.md

https://www.youtube.com/channel/UC0cBGCxr_WPBPa3IqPVEe3g

• https://www.raspberrypi.org/downloads/raspbian/
• https://github.com/iiab/iiab/wiki/Raspberry-Pi-IIAB-Images
• https://en.wikipedia.org/wiki/Raspberry_Pi#Third_party_application_software
• http://med.iiab.me/home/ (live medical iiAB sample)

Install of IIAB on RPi4

"The Raspberry Pi 4 is the latest upgrade in the Raspberry Pi SBC series. : This one has a Quadcore A72 CPU, up to 4 GB of LPDDR4 RAM, 2x USB 2.0, 2x USB 3.0 ports, double micro-HDMI ports, AC Wifi, Bluetooth 5.0 and Gigabit ethernet."

• NOTE medium and full install include sugarizer-server (default)

https://sugarizer.org/

https://github.com/llaske/sugarizer

https://github.com/llaske/sugarizer-server

Aug 6 2017

• Same install on a 32GB sd: using my Rpi3B+.
• Only difference: used medium install and only downloaded a few items to test

---

Aug 2 2017

Installed "Raspbian Buster with desktop and recommended software" (1)

• https://downloads.raspberrypi.org/raspbian_full_latest (2019-07-10)

2019-07-10-raspbian-buster-full.img (extracted: 6.4 GB)

256 GB SanDisk Ultra micoSDXC A1 card

Install with Etcher:

• https://www.balena.io/etcher/

In microSD reader

Insert card in RPi4 and power up:

• RPi4 (with 4 GB Memory) booted and changed GPU memory in "Preferences / Raspberry Pi4 Configuration" to [356] from [76]

( 2019-07-10-raspbian-buster-full - allows changing the allocated amount of memory in the RPi4)

(This appears to increase performance)

• https://github.com/raspberrypi/documentation/blob/master/configuration/raspi-config.md#memory-split

• in add/remove software: install firefox ESR

• in terminal:

 curl d.iiab.io/install.txt | sudo bash

• chose maximum iiab install size

• used middle selection for type of install (single point)

• Start Ansible install

Photograph terminal screen when it shows: "Internet-In-A Box (IIAB) software install is complete"

Reboot (by hitting [enter] key)

• Change iiab-admin's password before connecting your server to the Internet.

You can do this within http://box.lan/admin -> Utilities menu — or at the command line, if you type "passwd iiab-admin". 

• in firefox enter (in command line): 10.0.0.208/admin with user:iiab-admin and the password you entered above ^

Starts Admin console

• test setup ^

(1) http://wiki.laptop.org/go/IIAB/FAQ#Is_a_quick_installation_possible.3F

NOTES

• run iiab-hotspot-on and iiab-hotspot-off which are found in /usr/bin — these are especially useful after you've used a Raspberry Pi's internal Wi-Fi to download IIAB and content.
• http://wiki.laptop.org/go/IIAB/FAQ#What_services_.28IIAB_apps.29_are_suggested_during_installation.3F

silverblue

• https://silverblue.fedoraproject.org/
• https://docs.fedoraproject.org/en-US/fedora-silverblue/toolbox/

references

• http://wiki.laptop.org/go/The_OLPC_Wiki
• http://linuxcommand.org/lc3_lts0090.php
• https://www.redhat.com/en/blog/transforming-development-experience-within-centos

https://developers.redhat.com/blog/2019/09/24/changes-to-centos-what-centos-stream-means-for-developers/

https://fedoraproject.org/wiki/QA:Testcase_Virt_ARM_on_x8

https://npmccallum.gitlab.io/post/cross-architecture-roots-with-dnf/

https://fedoraproject.org/wiki/QA:Updates_Testing

GCI

• https://opensource.googleblog.com/2019/09/google-code-in-2019-is-right-around_23.html

https://codein.withgoogle.com/